Testing Equipment Dealers in Netaji Subhash Place, Delhi (135 products available)

The extremely accelerated stress environment is defined by high temperature, high humidity and high pressure. WEIBER provides humidity resistance evaluation test for electronics components through customized Extremely Accelerated Stress Test Chamber. This chamber provides high performance test in minimal amount of time according to international IEC 60068-2-66 standard. This chamber also known as Accelerated Stress Test Chamber, Halt and Hass Test Chamber, Halt Test Chamber and Hass Test Chamber. This chamber reduces the time taken for humidity testing in electronic components. 2 types of tests saturated and unsaturated extremely accelerated stress test can be performed. In saturated test the temperature is maintained at 1210C at 100%RH, and for unsaturated temperature of 110, 120, 1300C is maintained at 85%RH. Normally for electronic components unsaturated type test is done.

• Wavelength: 1310/1550 nm
• Dynamic Range: 36/34 dB
• Display: 7 in (178 mm) outdoor-enhanced touchscreen, 800 x 480 TFT
• Interfaces: Two USB 2.0 ports, RJ-45 LAN 10/100 Mbit/s
• Storage: 2 GB internal memory (20 000 OTDR traces, typical)
• Power supply: Power supply AC/DC adapter, input 100-240 VAC, 50-60 Hz, 9-16 V DCIN 15 Watts minimum
• Event dead zone: 0.8 m
• Attenuation dead zone: 3.5 m
• Distance range: 0.1 to 260 km
• Pulse width: 5 ns to 20 micro s
• Loss threshold: 0.01 dB
• Loss resolution: 0.001 dB
• Sampling resolution: 0.04 to 5 m
• Reflectance accuracy: +/- 2 dB

• Feature: Large easy to read digital display,Convenient mini size with protective rubber holster and tilt stand,Data Hold locks reading in the display
• Warranty: 2 Year
• Weight: 153 gm
• Model Name/Number: MN36
• Brand: Extech
• Dimension: 138x72x38 mm
• Power: 2 x AAA batteries

• Weight: 40-50kg
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Material: Metal

Standard Compaction Test apparatus consists one each of compaction mould steel, 100 mm I.D. x 127.3mm height x 1000 cc. volume, complete with collar and base plate. Compaction Rammer is 2.6 kg in weight x 310mm controlled fall.

• Type: Soil Testing Equipment
• Application: Paper Testing
• Weight: 10-50kg

Road Testing Equipment · Pavement Content Tester · Avantech provide wide range of road, runway, airport pavement testing equipment in India

Our Three Phase Dual Source Energy Meters (PEM-4130) are inputted with certified components and hi-tech features to provide the users with high working capability, accurate results and smooth operations. Also, they need negligible maintenance. We quote nominal prices for global customers. We carry timely deliveries with the aid of best shipping and logistics services. We are the reliable Manufacturer, Supplier and Exporter of Three Phase Dual Source Energy Meters from Delhi, India.Features : Displays Active Energy (kWh). Active energy - Energy accumulation / integration, reverse lock. CT Primary 1A to 50kA. Programmable. CT Secondary range 0.5A to 5A. Programmable. PT Primary range 50V to 500kV AC. Programmable. PT Secondary range 50V to 500V AC. Programmable. Load hour for secondary source(DG) Smart voltage sensing(AC & DC)of secondary source Metering Standard- IEC 62053-21/22.

• Resolution: PH 0.01PH
• Calibration: 1point or 2point
• Power: 9V battery(included)
• Range: PH 0.00
• mV: -1999
• Temperature: 1 °C
• Accuracy: PH ±0.01PH
• Input Resistance: 10¹²
• Dimensions: 166 x 76 x 46mm
• Operating Conditions: Temperature 5

• Brand Name: U-Tech
• Automation Grade: Manual
• Power Supply: AC 220 V 50Hz
• Vacuum Degree: 0-90kPa
• Air Pressure: 0.5MPa

Capacity up to 2 liters : For two Stirrers For four Stirrers For six Stirrers

manufacturing high quality products like spirit lamp with competitive prices..

We have bts 4 channel dc energy meter from spaceage :- (a) general specifications : (1) parameters: current, voltage and energy for each channel of 4 channels. (2) accuracy: 1% of the range for voltage (voltage range is 20v to 70v dc). 1% of the range for current (current range is 0 to 99.9a dc). 1% of the range for cumulative energy. (3) resolution: 2 place decimal for voltage and 1 for current. 2 place decimal for energy. (4) no. Of digits: 3 digits for current and voltage. (5) input supply: 20v to 70v dc, polarity independent. (6) size: 96mm (w) x 96mm (h) x 65mm (d). (7) operating principle: micro-controller based. Real time clock incorporated. (8) operating temperature: 0°c to 55°c. (b) range of operation : (1) voltage dc: 20v to 70v. (2) current dc: 0a to 99.9a. (c) inputs (4 independent channels) : (1) dc voltage: 20v to 70v. (2) dc current: the four channels dc current (0 to 99.9 a) provided to sense the current. (d) display : information displayed using lcd with back light 2 information displayed by automatic scrolling or manual scrolling. (e) communication : the dc em communicates with other devices on a 2-wire optically isolated rs-485 link and uses the modbus rtu slave protocol. (f) mounting : wall mounted, mounting fixture provided. Optionally rack mounting can also be provided. (g) sensor options : (1) shunt based – requires wires to be cut and thimbles to be crimped. (2) hall effect based – cable can be threaded through these sensors. Sensors mounted on pcbmounting plate and powered internally from the meter. (3) split core hall effect sensors – these sensors can be clamped upon the cables and hence no disruption in working of site. Sensors mounted on pcbmounting plate and powered internally from the meter. (4) sensor mounting – wall mounting. (h) data storage and display capability : (1) daily day energy consumption of last four months is stored on memory. (2) monthly consumption data for last 12 months. (3) information can be accessed on the lcd display locally. (4) user can directly view results of a specific month instead of scrolling thru sequentially all the data. (i) password protections : (1) first password for entering into config mode. (2) config. Password can be modified in the field. (3) second password to reset config mode password, if user has forgotten the same. (4) third password to reset memory data. (j) settings under config mode -- allows following settings to be changed in a user friendly manner : (1) slave id (2) date, protection against invalid date (3) time, protection against invalid time (4) history view (5) memory reset (6) password reset

• Capacity: 200 Tons & 300 Tons, 100 Tons
• Load measuring crossed stroke: +-1% on indicated load from 2%
• Side wall plate: 4 mm M.S
• Mullers R.P. M: 22 R.P.M
• Electrical motor: 960 R.P.M 3 phase. (Sigma Make) 1 year warranty.
• Gear box: Reduction Gear Box (2 Stage). 1 year warranty

The CBR method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. It meets the requirements of BIS-2720 Part XVI and consists of Load frame. Our California Bearing Ratio Test Apparatus is designed with precision keeping in mind the needs of the clients, and are widely used for laboratories activities. The California Bearing Ratio Test Apparatus is made using high quality raw material, and is incorporated with many advantageous features. We make available California Bearing Ratio Test Apparatus with different speeds, and cater to the needs of the clients. Features Precision engineeredCustom manufacturedHigh performance rateHigh speed Available in Three speedSix speedTwelve speedThirty speed Specifications Hand operated Capacity 5000 kg.One CBR Mould 150 mm diameter and 175 mm high complete with base plate and collar 150 mm diameter and 50 mm high.One penetration Piston faces 50 mm diameter. Bracket.Displacer Block 148 mm diameter and 47.7 mm long.Surcharge Weight 5 kg and 2.5 kg with central hole and also slotted. Tripod Cutting collar.Proving ring, capacity 1000 kg.One diameterl gauge with least count .01 mm.California Bearing Ratio Apparatus Motorized Complete as above, but supplied with a motorized load frame with rates of travel of lead screw 0.025 mm/min.; 0.05 mm/min.; 0.0625 mm/min.; 0.125 mm/min.; 0.25 mm/min.; 0.5 mm/min.; 0.625 mm/min.; and 1.25 mm/min.Available in-Hand Operated, three speed, six speed, twelve speed and thirty speed.

• Heater "W" Wattage: 350 W
• Temperature Range :: Ambient to 210.1°C, working at 200.1°C continuous
• Housing Material: CRC / MS Sheet duly Powder Coated

Double walled useful for cable, PVC Rubber Testing, Solid Alum. Round shape block having no. of holes for Thermal tubes as per IS: Strip type deluxe quality Kanthal heater to give uniform Temperature S. S. 304 grade S. Steel top having provision for holes for different tubes Full feature Microprocessor based PID Temp. Controller cum indicator to give better accuracy.

Our company is a renowned Manufacturer, Supplier and Exporter of Blood Glucose Monitoring Systems. The Blood Glucose Monitoring Systems we make available are manufactured in compliance with international quality standards.  Bulk orders of the devices are processed by us as per the specific requirements of the buyers.   Specifications : Blood Glucose Monitoring System 5 Seconds Measuring Time 0.5µL Capillary Blood Volume 450 Results Memory Product Specification Blood sample - Capillary blood Blood Volume 0.5µl HCT Range 20% ~60% Measuring Range - 20-600 mg/dL (1.1-33.3 mmol/L) Measuring Unit - mg/dL & mmol/L Measuring Time - 5 Seconds Memory -  450 results Avg. Result Function - 7days, 14days, 28days Avg. Mode Display - LCD Operating Temperature - 10~40°c Operating Humidity - < 85% Storage Temperature - 0~50°c Storage Humidity - < 95% Power Supply - CR 2032 ( 3V, Lithium Battery) Data Output - RS232 Interface Alarm Function - Available   Instructions : The eBcare Blood Glucose test strips are intended for use with the eBcare Blood Glucose Meter only. Read user’s manual carefully before use. Store in a dry place at temperature between 4°C~30°c(39°F~86°F) Do not freeze Use test strips within 3 months after first opening. Do not reuse the strips.  Reagent Composition : Glucose Oxidase - 1 I U Potassium ferricyanide - 0.75mg Non- reactive ingredient - 1.25mg

• Brand Name: Sisco India
• Country of Origin: Made in India
• Usage/Application: Laboratory
• Material: Stainless Steel
• Display Type: Digital
• Operating Mode: Automatic
• Testing speed: Up to 300 mm/min

• Condition: New
• Warranty: 1 Year
• Power Source: Electric
• Certification: CE Certified
• Test Voltage Range: 12v
• Mounting: Wall Mount

• Sizes ( W X D X H In MM): 810 x 400 x 255
• Temperature Range: 97°C. ±2°C

Accelerated Curing Tank is double walled curing tank. Inside chamber of stainless steel and outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Temperature ranges from 97°C ± 2°C. The temperature is totally microprocessor based P.I.D. or Digital Temperature Controller Cum Indicator controlled for accurate temperature rating. double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss. Temperature Range: Temperature ranges from 99.9°C with temperature accuracy of ± 2°C. Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.  Circulation :Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion Safety Feature: Thermostat based safety device. Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

• Material: Metal
• Application: Industrial
• speed: 20 to 180 RPM
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Flocculator has been specially designed for use in water treatment plants to correctly estimate the Dosing of alum and such other coagulants for treatment of water and sewage. In provides identical Test conditions for all samples. Illumination base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc samples. Flocculator consists of heavy duty DC DRIVE variable speed motor heaving speed from 20 to 180 RPM with built in speed control. Stainless Steel Stirring rods are provided with adjustable spacers to adjust the depth of stirring Paddles. The stirring shaft can be removed without disturbing other stirrers. The unit is supplied without beakers to work on 220230 Volts A.C.

• Application: Industrial
• Display: Digital

• Product model: SOL200
• Power Range: -50dB,+26dB
• Output wavelength: 800nm to 1700nm
• Working temperature: -20
• Storage temperature: -40
• features: LED lighting, frequency identification
• SKU: 29250

• Frequency: 50Hz
• Item Code: DO701
• Voltage Type: DC
• Size: 60mm

• Type: Composite
• Certification: CE Certified
• Weight: 100-200gm
• Color: Yellow
• Voltage: 3-6VDC
• Display Type: Digital
• Power Source: Battery
• Warranty: 1 Year

• Measurement range: 0-200 Gu

The surface luster meter for printing ink, bake lacquer, coat, woodwork, construction decoration materials like marble, granite etc, plastic, sheet and other non metal materials.