Thermal Detectors Dealers in Delhi (11 products available)

Brand Name : System Sensor

Operating Voltage Range : 8 to 30VDC (Nominal 12/24VDC)

Typical Standby Current @ 25ÞC : 60μA @ 24VDC (LED no blink)

Maximum Alarm Current (LED On) : 80mA @ 24VDC (Limited by panel)

Application Temperature Range : -30°C to +70°C

Humidity : 5 to 95% Relative Humidity (non condensing)

Diameter : 102mm

Model : 5351E

The 5351E thermal detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 5351E thermal detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest in thermal element technology the detector provides efficient and accurate detection of fires, especially in environments such as bars or kitchens where smoke detectors are inappropriate due to the high level of airborne contamination.   Features• Low profile design• Low current draw• Backward compatible with Series 100 detector range of bases• Wide operating voltage 8 to 30VDC• Bi-colour LED detector status indicator• Programmable sensitivity• Addressable feature• Advanced maintenance features via remote hand-held test unit• Range of detector bases available• Tested and approved to EN54 – 5:2000 Class A1R (Amendment 1)• Extended warranty

System Sensor 200 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level. Models 5251B and 5251RB use an innovative thermistor sensing circuit to produce 135°F fixed and rate-of-rise thermal detection in a low profile package. Model 5251H provides fixed high temperature detection at 190ºF. These thermal detectors provide cost effective, intelligent property protection in a variety of applications. Specification Height : 2.0 inches (51mm) Diameter 6.1 Inches installed in B210LP base 4.1 inches (104 mm) installed in B501 base Shipping Weight Heat 4.8 oz. (136 g) Photo/photo with heat 5.2oz. (147 g) ion 5.4 oz. (153 g) Operating Temprature Range Ion Photeo : 32-1200F (0-490C) Photo with Thermal 32-1000F (0-380C) Thermal : -4-1000F (-20-380C) High Temprature : -4-1500F (-20-660C) UL Listed Velocity Range Ion : 0 - 1200 fpm (0 - 6.1 m/sec) Photo with Thermal : 4000 fpm Suitabe For Installation in ducts Insect Screen Hole Size Photo : 0.016 inch (0.41mm) nominal Ion : 0.035 Inch (0.8mm) nominal Relative Humidity : 10-93% noncondensing Thermal Rating Fixed Temprature Setpoint : 1350F (570C) Rate of Rise Detection : 150F/min (8.30C/min.) High Temprature Heat : 1900F (880C) Voltage Range : 15-32 Volts DC Peak Standby Current (Max. Avg.) Ion/Thermal : 150 pA @ 24 VDC (without communication, LED off) 200 pA @ 24 VDC (one communication every 5 sec. with LED enabled) Photo/Photo With Thermal : 250 pA @ 24 VDC (without communication LED off), 300 pa @ 24 VDC (one communication every 5 sec. with LED Enables) LED Current (Max.) : 6.5 mA @ 24 VDC (on)

We offer high-performance Photo Thermal Detector that detects fires developing slowly or in a fast manner. Output of the thermistor and optical chamber is monitored using an onboard processor by a special algorithm. Features Detects incipient alarm quicklyOne time enabling of alarm signalUses a combination of inputsReduced nuisance alarmsExcellent response time to actual fire Demanded forMallsHotelsCollegesOfficesCinema halls

Designed for on the spot routine maintenance inspections. Model Number a30 designed for maintenance inspections not requiring a report. The a30 can also be transformed into an Inspector at any time! Every Pixel is individually calibrated!Double Vision feature takes a Thermal and Digital picture at the same time, and can include up to a 45 second voice recording. Hands-free flashlight (optional) screws into camera to brighten dark areas for clear digital pictures. Operates on it's own internal battery, enabling longer camera battery life High Temperature Upgrade - 212o to 1112oF (100o to 600oC) Wide Angle Lens Upgrade - .5 Magnification allows for a 35o x 26o FOV Telephoto Lens Upgrade - 2 X Magnification allows for a 8.75o x 6.5o FOV "a" speed at 9 Hertz