Laboratory Cement Autoclave
55,000 Per Piece
1 Piece (MOQ)
Laboratory Cement Autoclave
48,000 Per Piece
1 Piece(s) (MOQ)
Best Deals from Cement Autoclave
Cement Autoclave
Get Price Quote
Cement Autoclave
60,000 Per piece
1 Piece (MOQ)
Cement Autoclave
Get Price Quote
Cement Autoclave : Alpha Chem is manufactures,exporter & suppliers Cement Autoclave. Cement Autoclave : These equipments are tested in accordance with the procedures laid down in ASTM C 151 standard where change in the length of the bars (test) of cement is measured for the difference in the size after exposing them to stipulated pressure and temperature for a specific time period. Feature : Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures Pressure Control: The pressure inside our cement autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Specification : Wing nut lock locking mechanism for ultimate ease of operation and safety.Conforming to ASTM C151, AASHTO T 107Huger grade spring loaded safety valve of brass., duly chrome plated.High accuracy and reliable pressure gauge. General Description & Specifications: The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost.
STAINLESS STEEL CEMENT AUTOCLAVES
Get Price Quote
Product Description Stainless Steel Cement Autoclaves We are engaged in manufacturing and exporting a wide range of Cement Autoclaves. These products includes a stainless steel cylinder with a welded heat insulated voer that is confined in a heat insulated metal housing, mounted on a sturdy supporting frame. In order to control the electric heating units, the attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights. In addition to this, to hold specimens above water level in a vertical position and autoclave, laboratory cement autoclave is offered by us with test bar holder and special rack to expose them in the same manner. Technical specifications:- Inside chamber dimensions are – 10.5 cm diameter x 40.5 cm height The device is suitable for operation on 230 V, 50 Hz, single phase A.C. supply.
Cement Autoclave
40,000 - 75,000 Per Piece
1 Piece (MOQ)
We are engaged in manufacturing and exporting a wide range of cement autoclaves. These products includes a stainless steel cylinder with a welded heat insulated voer that is confined in a heat insulated metal housing, mounted on a sturdy supporting frame. In order to control the electric heating units, the attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights. In addition to this, to hold specimens above water level in a vertical position and autoclave, laboratory cement autoclave is offered by us with test bar holder and special rack to expose them in the same manner. Technical specifications: inside chamber dimensions are – 10.5 cm diameter x 40.5 cm height the device is suitable for operation on 230 v, 50 hz, single phase a.c. Supply.
Cement Autoclave
80,000 - 110,000 Per piece
1 piece (MOQ)
Cement Autoclave
Get Price Quote
Cement Autoclave, offered by us, is a high pressure autoclave designed especially for conducting accelerated soundness tests on Cement or the autoclave expansion tests. It is designed with utmost precision and in compliance with the set industrial norms and standards. It is mounted in a sturdy supporting frame, and enclosed in a heat- insulated / metal housing which is attractively finished in hammer-tone paint. Our Cement Autoclave is widely acclaimed due to its high performance, durability and reliability. We are a prominent Cement Autoclave Manufacturer and Supplier from Uttarakhand, India. We make them available to our customers safely and in a short span of time. Details : The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switches and pilot lights for controlling the electric heating unit.
Laboratory Cement Autoclave
Get Price Quote
We are instrumental in offering excellent quality Laboratory Cement Autoclave. It is used for conducting accelerated soundness tests on cements. Also, Laboratory Cement Autoclave facilitates the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. The Laboratory Cement Autoclave consists of a stainless steel cylinder with a welded heat insulated voer. Control unit of the instrument encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Further, Laboratory Cement Autoclave is provided with test bar holder.Specifications : Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height Suitable for operation on 230 v, 50 Hz, single phase, ac supply
Cement / Tile Testing Autoclave
Get Price Quote
LS India Cement Testing Autoclave Especially designed for cement industry, these Cement Testing Autoclave or Tile Testing Autoclave systems provide precise results conforming to required standards of IS. Featuring durable construction of MS or Stainless steel housing chamber, these units prove to be finest even in tough conditions. JLS Cement Autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. The whole unit of cement autoclave is mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing with finished paint. The control unit is attached to the side of the housing enclosing a sensitive pressure regulator and pressure gauge, power switch and pilot lights for controlling the electric heating unit. Features of Cement Testing Autoclave Corrosion resistant construction Easy, safe and precise operation. Low maintenance required Perfect for tough industrial conditions Low sterilization process time Digital / Manual Operating controls Full Range of Options & Accessories
Laboratory Cement Autoclave
Get Price Quote
With stainless steel chamber (21 kgcm.sq. Pressure) The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height suitable for operation on 230 v, 50 Hz, Single Phase, A.C.Supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.
Cement Autoclave
65,000 - 75,000 Per Piece
1 Piece (MOQ)
Cement Autoclave
Get Price Quote
1 Piece (MOQ)
It is high pressure autoclave designed especially for conducting acceleraed soundness tests on Cement or the autoclave expansion tests. It is mounted in a sturdy supporting frame, and enclosed in a heat- insulated / metal housing which is attractively finished in hammertone paint.The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switches and pilot lights for controlling the electric heating unit.
Laboratory Cement Autoclave
Get Price Quote
It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kg/cm2 pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply and supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.
Laboratory Cement Autoclave
Get Price Quote
The Autoclave is suitable for conducting accelerated soundness tests on cements of the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a weldedheat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights forcontrolling the electric heating units.
Laboratory Cement Autoclave
Get Price Quote
It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kgcm2 pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply. Supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.
Cement Autoclave
67,000 - 67,500 Per Piece
Cement Autoclave
55,000 Per Piece
Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch – Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031  General Descripation & Specifications:The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.  Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner  Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve  Â
Cement Autoclave
Get Price Quote
 Alpha Chem is manufactures,exporter & suppliers Cement Autoclave. Cement Autoclave : These equipments are tested in accordance with the procedures laid down in ASTM C 151 standard where change in the length of the bars (test) of cement is measured for the difference in the size after exposing them to stipulated pressure and temperature for a specific time period.  Feature :  Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures  Pressure Control:  The pressure inside our cement autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Specification : Wing nut lock locking mechanism for ultimate ease of operation and safety.Conforming to ASTM C151, AASHTO T 107Huger grade spring loaded safety valve of brass., duly chrome plated.High accuracy and reliable pressure gauge.  General Description & Specifications:   The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.  Inside chamber dimensions   10.5 cm dia x 40.5cm height. Rating                                    :   3000 watts Pressure range                       :   21 kg/cm2 Least Count                            :   04 kg/cm2 Temp.range                             :   215 deg C Power supply                         :   230 Volts AC Single Phase 15 Amp  Standard Accessories :   Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost:   Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve
Laboratory Cement Autoclave
38,000 Per Piece
silent features: rust proof stainless steel pressure vessel specially designed steam safety valve, pressure control switch and temp. control switch - triple safety precautions for operator safety accurately calibrated pressure gauge guaranteed timings and performance as per is 4031 general description & speci???cations the autoclave is double walled. inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. the boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. the silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. the boiler is mounted in between the strong angle iron frame and covered with crc sheet – attractively powder coated. the outer cover can also be of stainless steel at an extra cost. the gap in between the walls is ???lled with thermal insulation to prevent heat loss and energy. the control system
Laboratory Cement Autoclave
Get Price Quote
The Laboratory Cement Autoclave is suitable for conducting accelerated soundness tests on Cement or the Autoclave expansion test. The equipment meets the requirement of IS: 4031 (P-3). The equipment consists of a Stainless Steel Pressure Vessel with insulated outer shell, fabricated out of high quality Stainless Steel Sheet. The pressure inside the vessel is controlled through a micro processor based PID controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, PID controller with RTD for control of Heater unit.Specification Working Pressure : 21 Kg / cm² ± 1kg / cm² at 215° C Pressure Vessel : ID 150mm X Depth 500 mm Overall Dimensions : 390 mm (L) X 390 mm (W) X 810 mm(H) Weight : 70 Kg Heater : 3000 Watts Supply : 220 V, 50 Hz, 1 phase Panel mounted PID controller with international safety certifications. Product Code: EKE 408-1Standrad: IS : 4031 (Part - 3)Optional Extra EKE 40201 Set of 20, Smooth Reference Points EKE 40501 Set of 20, Knurled and Threaded Reference Points FeaturesRust proof stainless steel pressure vessel & enclosure Microprocessor based PID controller for accurately controlling the temperature & pressureThree fold safety mechanism for the equipment & the operator Reliable sillicon rubber lid sealing gasket. Very Compact
Cement Autoclave
Get Price Quote
Laboratory Cement Autoclave
Get Price Quote
Especially designed for cement industry, these Cement Testing Autoclave or Tile Testing Autoclave systems provide precise results conforming to required standards of IS : 4031-1968 and IS : 1624-1960. Featuring durable construction of MS or Stainless steel housing chamber, these units prove to be finest even in tough conditions. The whole unit of cement autoclave is mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing with finished paint. The control unit is attached to the side of the housing enclosing a sensitive pressure regulator and pressure gauge, power switch and pilot lights for controlling the electric heating unit.
Cement Autoclave
Get Price Quote
Cement Autoclave
Get Price Quote
1 Piece(s) (MOQ)
We are offering � This Autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test, requiring constant steam pressure with the corresponding constant temperature. � It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing. � The attached control until encloses a sensitivity pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. � Supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. � Auto clave for soundness test designed for the performance of expansion test of cement it consists of cylindrical vessel in special steel, that can receive rack holding 10 specimens of 25 x 25 x 250mm. � This vessel is thermally isolated and coated with a sheet protection. Heating is achieved through two special resistance. � The control panels comprises of a pressure gauge with regulator incorporated thermostat and startstop controls, button for temperate setting the auto clave is fitted with safety .
Cement Autoclave
Get Price Quote
Cement Autoclave
Get Price Quote
After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free limeThis method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator. Silent Features: Rust proof stainless steel pressure vessel Specially designed Steam Safety Valve, pressure control switch and Temp. control switch - Triple Safety precautions for operator safety Accurately Calibrated Pressure Gauge Guaranteed timings and performance as per IS 4031 General Descripation & Specifications The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches. Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost: Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve
Laboratory Cement Autoclave
Get Price Quote
The double lever tensile testing machine for cement briquette is available in different ranges. Loading is applied automatically by lead shots flow in manually operated units and by a traveling poise on the lever in Electrically operated model. The loading is controlled at the rate of 226.7kgminute and measured to 0.05kg. The machines are fitted with precision gunmetal jaws and are provided with leveling feet..
Laboratory Cement Autoclave
38,000 Per Piece