Cementing Plugs Dealers

We deal in Cementing Rubber Plugs are offering cementing rubber plug designed with plastic core and aluminum core. This helps to compliment its line of plugs to decrease drill out times. The Cementing Rubber Plug is used for separating the cement slurry from the mud. Our range of Cementing Rubber Plugs have solid top plug and the bottom plug is hollow. They can all be drilled out with PDC bits. The material of the Cementing Rubber Plug body is Acrylonitrile- Butadiene rubber. It is heat-resisting and tough and the core is made of a glass-filled high strength Phenol resin core. Attributes : The tapered base fits the cavity of the bottom plug for a positive seal. The fins and tail section provide positive wiping action. Fins also serve as a seal while cementing A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through. The cementing rubber plugs are available in sizes 4 12" to 20". It prevents the mud from blending into the cement slurry to influence the cementing quality.

• Type: Cementing Plug
• Application: Oil Field
• Condition: New
• Color: Black
• Size of casing (mm/inch): 139.7(5-1/2) 177.8(7) 244.5(9-5/8) 339.7(13-3/8)
• O.D. (mm/inch): 134(5-9/32) 170(6-11/16) 232(9-1/8) 325(12-51/64)
• Height (mm/inch): 250(9-27/32) 235/260(9-1/4/10-1/4) 274(10-25/32) 355(13-63/64)
• Conn.API: Rotary or Non-Rotary
• Model: WC-PCC-3
• Product No.: WC-30804

• Type: Cementing Plugs
• Shape: Cylindrical Round
• Application: Oil Drilling
• Feature: Good Quality, High Pressure Bearing Capacity, Temperature Resistance
• Condition: New
• Country of Origin: India

CONVENTIONAL TOP & BOTTOM PLUG Plugs are available in Nitrile, Viton, Aflas and other elastomers. Plugs are available in conventional and Non-Rotating Design. Plugs are PDC drillable Maximum temperature  rating 400°F Non-Rotating profile reduces the drilling time Oil Resistant

• Type: Cementing Plugs
• Shape: Cylindrical Round
• Color: Black
• Feature: Good Quality
• Condition: New
• Sizes: 2 7/8” to 30” + any special size on customer request.

We manufacture a complete line of downhole oilfield wiper plugs. Sizes range from 312” tubing plugs to 20”casing plugs. We offer standard rubber covered plugs with aluminum cores and premium, PDC drillable, plugs molded from urethane. Our standard elastomer for our rubber plugs is SBR. We also offer Nitrile, HNBR and Fluorocarbon (FKM) for higher temperature applications and XNBR for higher wear resistance. These materials are available in both our top and bottom plugs. Our Urethane coverUrethane core plugs are rated to 250° F while our SBR coverAluminum core plugs are rated to275° F and our Nitrile coverAluminum core plugs are rated to 325° F. All of our bottom plugs have rupture diaphragms rated at 125300 psi. Listed to the right are the plug casing size, casing weight and material from which the plugs are manufactured. RA is rubber cover and aluminum core. UU is urethane cover and urethane core. RU is rubber cover and urethane core.

Cementing Plugs: Revata Engineering manufactures Cementing Plugs from high-performance special elastomers and core materials. These Cementing Plugs are specially designed with a positive wiping action to ensure that the casing is clean.   Top Plugs: The Bottom Cementing Plug is designed to exert continuous pressure on the casing wall. The core is made of special materials such as Plastic, Aluminium or Phenolic depending on the application and well conditions. The tapered base fits the cavity of the bottom plug initiating a positive seal. A solid rubber top plug is also available.  

aluminium core cementing plug to Compliment its line of plugs to decrease drill out times. The cementing plug is used for separating the cement slurry from the mud .It can prevent the mud from blending into the cement slurry to influence the cementing quality. Structure features: The top plug is solid .The bottom plug is hollow. They can all be drilled out with PDC bits. The material of the plug body is acrylonitrile- butadiene rubber. It is heat-resisting and tough. The core is made of a glass-filled high strength phenolic resin core. The tapered base fits the cavity of the bottom plug for a positive seal. the fins and tail section provide positive wiping action. Fins also serve as a seal while cementing. A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through.

Cementing plugs are used to remove the mud during cementing operations. Top cementing plugs and bottom cementing plugs are used in the cementing process. The top and bottom cementing plus general have different colors (bottom plugs are red and top plugs are black) in production for easy usage in operation. The top cementing plug has a solid body that provides positive indication of contact with cementing floating collar and bottom plug through an increase in pump pressure. The bottom cementing plug with a hollow body is installed ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing.

Cementing Plug are manufactured using graded rubber that is fused onto a composite or aluminum core. The top plug can be used when a dual plug system is not required and the bottom cementing plug can be used when a dual plug system is required. All plugs are completely PDC drillable, and the operating range of temperature possible with an Aluminum core is up to 200 degrees Fahrenheit.

In Drilling operation for oil and gas well cementing job has an important function in providing isolation from formation. Cementing of a well is done to support axial load of casing strings and reduce the failure due to tensile load thus reducing burst and collapse. It primarily avoids the invasion of corrosive fluids from the formation thus preventing casing strings and also protects the water zone.

Sledge Hammer Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required. These plugs are completely PDC drillable. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit.   Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.

• Material: Rubber
• Country of Origin: Made in India
• Wiper Fin O.D: 5.315 inch
• Differential pressure: 300 psi
• Working Temperature: 120 degree C
• Casing size(in): 5 1/2 Inches

We are offering liner wiper plug. Product description liner wiper plug for the oil and gas industry manufactured from neoprene [bcbe], sbr and nr polymer with aluminium threaded inserts as per customer design and specification.

Plugs are used during cementing operations to help remove dispersed mud and mud sheath from the casing inner diameter and minimize the contamination of cement. A bottom plug is pumped ahead of the cement slurry and behind the spacer. It wipes any remaining dispersed mud from the inner diameter of the casing as it moves down the string. The top plug wipes center from the inner diameter of the casing and then seal at the float collar, resting on the on the bottom plug and causing a pressure increase at the surface including that the cement has been displaced. Top and bottom plugs are always different color. Bottom plugs are red and top plugs are black.

• Shape: conical flap type
• Country of Origin: Made in India
• Hole Diameter: 133 mm
• Number Of Shaft: 4
• Brand: HARSIDDH
• Efficiency: UP TO 7000 psi 

Sledge Hammer Cementing plugs are manufactured of graded rubber that is fused upon a composite or Aluminum core. This top plug can be used when dual plug system is not required and Bottom cementing plug can be used when dual plug system is required. These plugs are completely PDC drillable. Operating range of temperature with Aluminum core is up to 200 degree Fahrenheit. Plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.

• Type: Cementing Plugs
• Material: Aluminium, Cast Nylon
• Shape: Cylindrical Round
• Application: Oil Drilling Industry, Oil Field
• Application: Oil Drilling
• Color: Black, Blue, Grey, Red, Yellow
• Feature: Chemical Resistance, Good Quality, High Pressure Bearing Capacity, Temperature Resistance
• Condition: New, Used

We are the main supplier of this product.

NeOz top and bottom cementing Plug have a firm wiping action and our designed to provide a sure seal against the casing wall to prevent mixing of cement slurry and displacement fluid. These PDC drillable plugs are available in Standard and Non Rotating type design. NeOz Cementing Plugs are to be used with NeOz Float Equipments for a proper Cementing Job.

We manufacture a complete line of downhole oilfield wiper plugs. Sizes range from 312” tubing plugs to 20”casing plugs. We offer standard rubber covered plugs with aluminum cores and premium, PDC drillable, plugs molded from urethane.Our standard elastomer for our rubber plugs is SBR. We also offer Nitrile, HNBR and Fluorocarbon (FKM) for higher temperature applications and XNBR for higher wear resistance. These materials are available in both our top and bottom plugs.

Cementing Plugs, centralizers, Slip-On Set Screw Stop Collars, Float Shoe

We are offering Cementing Plugs.

The cementing plugs contains Standard Cement Plug and Non-Rotating Cement Plug. The plugs maintain separation of cementing fluids, wipe casing walls clean, and prevent cement contamination. When bumped against a float collar, they provide positive indication of displacement and casing sealability.

top cementing plugs, Centralizer, Float Shoe, bottom plugs, Hammer Union

Cementing Plugs, Hinged Non Welded Bow Spring Centralizer

cementing plug, Hose Clamps, cone packing machine, Desilter

bottom cementing plug, spiralizer, Reamer Shoe, non rotating cementing plug

Cementing Plugs, Cement Machinery, Centralizer, Float Shoe, Float Collar