Coated Fasteners Dealers (36 products available)

• Type: Coated Fasteners
• Feature: Corrosion Resistance

• Material: Brass
• Size: M3 TO M56
• Application: Industrial
• Quantity Per Pack: 12
• Standard: ISO, JIS, GB, ANSI
• Finishing Type: FINE
• Material Grade: CS

We also provide xylan coated fasteners.

• Material: Metal
• Thickness: 10-15mm
• Application: Fittings
• Feature: High Quality, High Tensile
• Fastener Shape: Round Shape
• Brand Name: Flowtech

• Material: Zincflake
• Country of Origin: Made In India

We do job work of Magni Fasteners coatings. This coating is used for corrosion protection and to reduce friction in fasteners. All automotive fasteners are coated with this technology. 

Zinc Aluminium coatings are water based therefore low HAP (Hazardous Air Pollution), Low VOC (Volatile Organic Content). The coating meets ELV, WEE and ROHS norms guidelines for not using hazardous and declarable substances. Zinc AL Flake coating is higher corrosion protection in comparison with electrolytically deposited zinc or zinc alloy. Microlayer corrosion protection paint with chromate matrix and Zn flakes; Silver Grey in Appearance, Best suitable for CV and non ELV applications.

We are offering ptfe coated fasteners. Please find pictures of xylan coated fasteners we have recently exported.

• Thickness: Nominal 0.001” (1 mil)
• Pencil Hardness: 5H – 6H (ASTM D3363-92A)
• Tensile Strength: 4,000 psi

PTFE coated fastener’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts.

The offered rubber products are appreciated for being made in tune with the industry standards. Our product range is inclusive of Industrial Bellows, Expansion Joints, etc. These products find wide usage in electrical automobiles, paper, plastic and cement industries. The offered products are known for their durability, resistance towards wear & tear and seamless finish.

Introduction PTFE coated Fasteners reduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners. PTFE coated fastener’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts. Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. PTFE coated connectors have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.   Application PTFE Coated Fasteners have a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid. Why use PTFE Coating PTFE is non-stick, non-toxic self-lubricating and non-wetting,. It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties of PTFE Coating creates a long term advantage for a PTFE user. Technical Specifications: Use Temperatures Working temp. range up to + 260°C Corrosion Resistance Salt Spray (ASTM B117) up to 3,000 hrs (Nuts not frozen) Pencil Hardness 5H – 6H (ASTM D3363-92A) Kinetic Friction Coefficient 0.06 – 0.08 Thickness Nominal 0.001” (1 mil) Impact 160 in lb (ASTM D2794-93) Adhesion 5B (ASTM D3359-95) Elongation 35%-50% Tensile Strength 4,000 psi Operating Pressure Up to 100,000 psi

• Color: Blue, Red, Green, White
• Material: Carbon Steel
• Head Shape: Hex
• Thread Type: Yes
• Finishing: PTFE Coated

We can supply ptfe coated fasteners ( any grade ) as per customers' requirement.

• Thickness: .001" - .003"
• Tensile Strength (ASTM D1708): 3000-5000 psi
• Elongation (ASTM D1457): 300-500% 
• Impact Strength (ASTM D256): 3.5 ft-LB/in
• Hardness (ASTM D2240): 50-65 HB (shore D)
• Abrasion Resistance (Tabor): 12 mg
• Coefficient of Friction (ASTM D1894): .12 -.15 static, .05 -.10 dynamic
• Dielectric Strength (ASTM D149): 450 volts per mil
• Use Temperature: 600°F max
• Melting Point: 625°F
• Thermal Conductivity: 1.7 BTU-in/h-ft 2-°F
• Chemical Resistance (ASTM D543): Excellent
• Salt Spray Resistance (ASTM B117): Fair
• Water Absorption (ASTM D570): < .01%

AdhesivesSealants, applied to threaded parts from a unique coating that converts ordinary fasteners into self-locking and self-sealing fasteners. Dry to touch, Dri-loc AdhesivesSealants become an integral part of the fastener-and stay inert until parts are used. During the assembly process, Dri- Loc ® AdhesivesSealant is activated by assembly forces, releasing anaerobic adhesive which locks and seals parts securely.Meets or exceeds locking performance of chemically coated lock screws.

Coated fasteners including high tensile bolts, double end, tap end and all thread fasteners in a variety of stainless steel grades and alloys and coatings.

Standards DIN, IS, ISO, ANSI, BS, ASTM etc, Range: M12 TO M76, GRADE: 4.6, 5.6, 6.8, 8.8, 10.9, 12.9, FINISH: Black, Zinc Passivation, Powder Coating and Hot Dip Galvanized, We also manufacture as per customer's requirements and specifications.

coated fasteners which are high on demand list in the market that contain PTFE or other types of lubricants. The coating of xylan provides effectve solution to the problems in engineering construction regarding wrong surface properties arises. Moreover, the xylan is used as a coating material on alloy steel fasteners, aluminum and copper fasteners owing to various features including

DACROMET 320 is a an aluminium-grey, non-electrolytic, thin coating for anti-rust protection of steel, cast iron and other ferrous metal parts. It is composed of thin zinc and aluminium plates in a chrome oxide mould. Dacromet 500 also has an integrated lubricant, DACROTIZING is the process whereby the aqueous dispersion is applied by cold immersion or spray and is therefore free of any risk of hydrogen embrittlement. The coating thus produced is passivated throughout the film and provides high performance corrosion protection.