Concrete Test Hammer Dealers (69 products available)

• Manufacturer:: PROCEQ
• Model:: Original Schmidt Rebound Hammer

The quality of concrete is mainly judged by its compressive strength directly affecting the load-bearing capacity and durability of concrete structures. Proceq invented the Original Schmidt, the world’s first and now most widely used test hammer for analyzing the compressive strength of concrete properties. The Original Schmidt will hit the concrete at a defined energy whereas its rebound is dependent on the hardness of the concrete and is measured by the instrument. The Original Schmidt is available in models with different impact energies, each test hammer designed for a specific test application, in order to meet the needs of the customers to investigate a wide range of material types and sizes, such as bridge decks, thin walls, cast stone components or small components.

• White: Red

Concrete Test Hammer Specifications : Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case. Taag: Concrete Test Hammer Dealer in Chennai, Concrete Test Hammer Supplier in Chennai, Concrete Test Hammer Manufacture in Tamilnadu

• Type: Concrete Test Hammer
• Material: Aluminium Case
• Application: Laboratory Use
• Automation Grade: Automatic

The concrete test hammer is an instrument used for the non destructive testing of concrete. It allows one to have a quick estimate of the strength of concrete. Since it simply gives an indication based on surface properties.   Models available :   Concrete Test Hammer (AIM 388 ) Concrete Test Hammer (Digital) (AIM 388-DG)   Note: Both Hammers are available with NCCBM certificate.

• Material: Steel
• Application: Concrete Testing
• Brand Name: Steco
• Voltage: 220 V
• Frequency: 50/60 Hz
• Grade: Semi-Automatic
• Strength: 100-700 Kg/cm

• Power Supply: 2 X 9V Rechargeable Batteries
• Weight: 570 G
• Impact Energy: 2.207 Nm (1.63 Lb Ft) For Type N,0.735 Nm (0.54 Lb Ft) For Type L
• Brand Name: Proceq
• Warranty: 1 year
• Accuracy: Better than +/-2 Rebound Number 
• Display: 17 x 71 pixel,graphic LCD display
• Size: 55 x 55 x 255 mm 
• Resolution: 0.1 Rebound Number.
• Operating Temperature: 0 to 50 deg C
• Charger Connection: USB type B (5 V,100 mA)
• Continuous Use Time: Greater than 5 hours
• Hammer Mass: 135 g
• Concrete Compressive Strength Range: 10-100 N/mm2 (1450-14500 psi)
• Spring Extension Size: 75 mm (2.95
• Battery Life: Greater than 5000 impacts between charges

We are the largest manufacturer, exporter and supplier of Concrete Test Hammer in Kolhapur, India. This is an instrument which is easy to use for a quick measurement of the resistance to pressure of manufactured concrete structures like building and bridges. The test is fast and is unlikely to cause any damage to the concrete. They are designed and constructed keeping in mind the safety and quality standards of the industry under the guidance of professionals. The hammer is suitable for testing concrete with a comprehensive strength of 10 to 70 N/mm2. They are supplied in safe carrying case with an assurance of prompt delivery. Specifications : RSI-129 Concrete Test Hammer BS 1881 -202,ASTM C805 The Method is based on the principal that the rebound of an elastic mass depends on the hardness of the surface which it strikes. The Test is fast & unlikely to cause damage to the concrete. The hammer is intended for testing the quality of concrete in finished structures such as buildings and bridges. Supplied complete with carrying case and carborundum stone, the hammer is suitable for testing concrete with Compressive Strengths of 10 to 70 N/mm2. Weight 1.4 Kgs. App.

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-1386

Concrete Test Hammer Small : Alpha Chem is manufactures,exporter & suppliers Concrete Test Hammer Small. Concrete Test Hammer Small : The principles on which it works are based on the rebound impact of a hammer on a piston which rest against the surface of the concrete products. The Greater the resistance on the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with +/-20 % of actual. Specifications: Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is a attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be Richard to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100-700 kg/cm The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

• Model Number: STC-41
• Color: black
• Voltage: 220 V
• Usage/Application: Concrete testing lab equipment
• Brand: Superb Technologies

It is similar to the above with digital display of result.

• Country of Origin: India
• Type: Portable
• Material: Metal & Wood
• Application: Industrial
• Size: Standard
• Surface: Polished

This is intended for non-destructive testing of the quality of concrete in finished structures. In testing, the rebound number is measured, which is dependent on the strength of the mortar (concrete with coarse particles) close to the surface. Since the strength of the mortar as a rule determines the strength of the concrete, the rebound number gives an indication for the strength of the concrete. The results obtained are ±15% of the actual compressive strength. As the test does not destroy the specimen, the curing process continuing after setting of concrete the be followed up accurately.

Alpha Chem is manufactures,exporter & suppliers Concrete Test Hammer.  Concrete Test Hammer : The Method is based on the principal that the rebound of an elastic mass depends on the hardness of the surface which it strikes. The Test is fast & unlikely to cause damage to the concrete. The hammer is intended for testing the quality of concrete in finished structures such as buildings and bridges. Supplied complete with carrying case and carborundum stone, the hammer is suitable for testing concrete with Compressive Strengths of 10 to 70 N/mm2. Weight 1.4 Kgs. App.

• Material: Aluminum
• Brand Name: Proceq
• Weight: 1.3 Kg
• Dimension: 300 x 70 x 70 mm
• Impact Energy: 2,207 Nm
• Thickness: Greater 100 mm
• Handle Material: Glass-filled nylon

concrete test hammer manufacturer and exporter from india , mumbai. Globetrek engineering corporation is manufacturer , supplier and exporter of concrete test hammer from india . This concrete test hammer is also popular as rebound hammer .

• Features: Impact energy: 2.207 Nm • Measurement range: from 10 to 70 N/mm2 • Display 2x16 characters • Accuracy: ± 0.1 R

This new and advanced model of digital concrete hammer microprocessor operated consists of the standard unit similar to the model 58-C0181N but equipped with an electronic transducer, which converts the rebound of the hammer into an electric signal and displays it in the selected stress unit. The digital hammer, which is battery operated, can be easily connected to a PC or serial printer via the RS 232 port. A large permanent memory can store up to 5000 results.

Features More economical and practical China patented product. It can replace the same type foreign made instrument , - Size is small. The measuring results can be printed directly. Thus, ease the onsite detection. - Affordable, high accuracy, long life, and not subject to the life of use problem as mechanical concrete hammer did.

• Power Supply: 2 X 9V Rechargeable Batteries
• Range: 10 To 70 MpA
• Type: Portable
• Application: Uniformity Testing
• Weight: 1500 Gram
• Impact Energy: 2.207 Nm
• Automation Grade: Automatic

  We are the leading manufacturer & Supplier of superior Quality Digital Concrete Test Hammer. Concrete Test Hammer is designed specifically for the non-destructive testing of concrete structures. This method has considerable advantages over conventional methods of assessing the compressive strength of concrete in that large areas can be tested in a very short time at a very low cost .

Concrete Test Hammer (AIM 388)   The concrete test hammer is an instrument used for the non destructive testing of concrete. It allows one to have a quick estimate of the strength of concrete. Since it simply gives an indication based on surface properties.   Application Concrete Test Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

• Material: Alumnium
• Range: 10 TO 60 Robound Hammar
• Weight: 2-3kg
• Usage/Application: Concrete Testing
• Finishing: Anodizing Coated
• Resolution: 2 Rebound Number
• Packing Type: Wooden Box

The rebound of an elastic mass depends on the hardness of the surface against which its mass strikes. When the plunger of the rebound hammer is pressed against the surface of the concrete, the Spring-controlled mass rebounds and the extent of such a rebound depends upon the surface hardness of the concrete. The surface hardness and therefore the rebound is taken to be related to the compressive strength of the concrete. The rebound value is read from a graduated scale and is designated as the rebound number or rebound index. The compressive strength can be read directly from the graph provided on the body of the hammer.  

• Brand Name: SLISCO
• Place of Origin: India
• Surveying and civil engineering lab equipment: Dead Weight Testers
• Surveying and civil engineering lab equipment: Demountable Mechanical Strain Gauge
• Surveying and civil engineering lab equipment: Distance Measuring Wheels

The offered Concrete test Hammer is designed and manufactured by our professionals as per the set industry norms using supreme class components. Highly appreciated for its high performance, reliability and longer service life, it is widely demanded. Available in different specifications as per the requirements of clients, we offer this excellent quality apparatus at very nominal rates to the clients. Product Description:Specifications: � Strengths 100-700 kgcm � Frequency: -20 %

• Material: Mild Steel
• Usage/Application: Concrete strength
• Size: 150x150 mm cube

Manufacturers of concrete test hammer, available various range from manual, digital etc.

• Net weight: 1.1kg
• Measuring range: 10-60Mpa

Concrete Test Hammer (Big) For Testing Lab - NAUGRALABS LABORATORY PRODUCT NAME: CONCRETE TEST HAMMER (BIG) FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-038004 Description and Specification for Lab Tenders It is similar to the above but is used for testing concrete with over size aggregates (for which test, cubes promise no reliable results) and for testing concrete roads.. Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers Its plunger is wider as such, the amount of concrete reached by the impact is considerbly greater. With this model also the results obtained are within 20% of the actual compressive strength. The instrument is supplied with two handles which can be attached to the body of the concrete test hammer for carrying out the test easily. Complete with grinding stones. civil lab equipments manufacturers

• Material: Mild Steel
• Impact Energy: 0.833 Nm (0.614 lbf)
• Weight: 3.45 kg (7.60 lb)
• Brand: Proceq
• Hammer mass: 665 g (1.47 lb)
• Hammer head diameter: 8.0 mm (0.315")
• Operating temperature: -10 to 50 Deg C
• Dimensions of housing: 230 x 60 x 200 mm
• Measuring range: 145 psi -725 psi
• Model Number: OS-120