density kit
3,500 - 4,500 Per PIECE
Smoke Visibility Tester
Get Price Quote
The ASIAN Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permit to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. Left-hand side of the chamber has a hole, an exhaust fan fitted to the left hand side hole. Right hand side have hole which permit to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which have a clear glass window on the door. There are shutters on the left hand side and the right hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is a aluminium silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20o to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mount on the bottom of the chamber at an angle of 45o. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply the any gas with the instrument. Related Standard : UIC code 564-2 OR: appendix15: Test method for determining deterioration of visibility due to smoke released on combustion of materials.
Best Deals from Density Testing Equipment
Relative Density Apparatus
Get Price Quote
The Relative Density Apparatus has a cylindrical mold of 3000-15000 cm3 and the vibratory table is 75mm x 75mm. The Motorized 230 VAC Relative Density Apparatus runs on singleThree phase and there is a guide sleeve with clamp that is meant for the molds. The surcharge base plate of the Relative Density Apparatus can bear the surcharge weight for 3000 and 15000 cm3, and the other components include handle for base plate, dial gauge holder, dial gauge (0.01 mm x 25 mm) and travel with extension piece calibration bar (75 x 300 x 3mm).
Bulk Density Apparatus
Get Price Quote
1 Piece (MOQ)
SIS – 1376 This instrument is used to check the density of powder. Two models are available one with mechanical timer and other with digital timer and digital strokes counter Meet USP Standards. Can Hold 2 No. cylinders, capacity: 50ml. Based Rotaing and tapping mechanism User has to select the No. of stokes in the counter Model:(A)Bulk Density Apparatus With Timer (B)Bulk Density Apparatus with Digital Display of strokes S.S BODY AS PER GMP IS ALSO AVAILABLE
Density Basket
1,500 Per Piece
1 Piece(s) (MOQ)
Minimum Order Quantity 01 Piece size 20cm dia x20cm high Material for Construction Stainless steel Wire Mesh size 6.3mm 4.75mm Height 20cm dia x20cm For Density Tests on Aggregates as per Procedure Laid Down. Made of Brass GI with Stainless steel Wire Mesh Ruggedly Constructed. Complete with Handle. Note: Customize sizes also available
Bulk Density Apparatus
Get Price Quote
We are offering bulk density meter
Digital Bulk Density Apparatus
5,720 - 18,000 Per Piece
1 Piece (MOQ)
Bulk Density Apparatus is used to study the packing down of powder beds of different pharmaceutical and chemical powders, flakes, pellets, granules and other bulk substances. Bulk Density is an essential test required in the process of tablet, capsule filling and cosmetic manufacturing.Bulk density considers both the solids and the pore space, whereas, particle density considers only the mineral solids.
Bulk Density Apparatus
Get Price Quote
1 Piece (MOQ)
Bulk Density Apparatus – 951 is a specially designed to study the packing down of powder beds of different pharmaceutical and chemical powders, flakes, pellets, granules and other bulk substances. Bulk Density is an essential test required in the process of tablet, capsule filling and cosmetic manufacturing. The system is equipped with microcontroller based digital display for displaying accurate and exact stroke count and soft touch membrane type keys for ease of operation. The system has ‘SET’, ‘UP’ and ‘DOWN’ keys, for setting the total number of required strokes (Set Count) for the current measurement session. User can set to any number of required strokes within the range from 1 to 9999 counts. The system automatically stores the last ‘Set Count’ value which is retained in the memory even when the instrument is switched off. Each stroke count is displayed on the 4 digit seven segment bright red LED display on the front panel. A common lock cushioned holder for both the cylinders drops down smoothly from the height and holds the cylinders. The Up/Down (i.e. Tapping) movement of the cylinders stop automatically at the ‘Set Count’ value. An audible alarm sound indicates that the current measurement session is over. In case of power failure, the last counts are retained and the instrument starts counting automatically from the point of power failure. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. Features Extremely useful for Pharmaceutical Lab Highly Accurate and Easy to Operate Microcontroller Based Digital Display Soft Touch Membrane Keys 3 LED’s for status Indication Audible Alarm Sound Last Count Retention on Power Failure
tap density apparatus
27,000 Per Piece
1 Piece (MOQ)
Bulk Density Apparatus
Get Price Quote
1 Piece (MOQ)
Density Meter
350,000 Per Piece
Density Basket
Get Price Quote
Applications. Density Basket designed to enable measurement of the specific gravity of aggregates as well as compacted and uncompacted bituminous mixtures and aggregates as well as other materials.
Density Basket
Get Price Quote
Bulk Density Test Apparatus
6,500 Per Piece
1 Piece (MOQ)
Bulk density test apparatus as per I.S. 2386 Part IV. Determines bulk density or unit weight of aggregates. Specifications: Calibrated cylindrical measures of sheet iron with handles. Consists of 3 measures one each 3 litres capacity, 15 litres capacity and 30 litres capacity. Complete with one tamping rod, round, 16mm dia and 600mm long, one end rounded.
Activa Link Bush Kit
Get Price Quote
100 Piece (MOQ)
density kit
3,000 Per Piece
100 Piece (MOQ)
Introducing our Density Kit With Certificate, a must-have for accurate measurements. Including in Density Kit 1. Hydrometer 700-750 - 1 Piece with 5 year certificate 2. Hydrometer 800-850 - 1 Piece with 5 year certificate 3. Thermometer 0.25 - 1 Piece with 2 year certificate 4. Whatman Filter Paper 2 - 1 Box 5. Glass Jar 500 ML - 1 Piece 6. Oil Finding Paste - 1 Piece 7. Modified Water Paste - 1 Piece 8. Briefcase - 1 Piece
Relative Density Apparatus
Get Price Quote
1 Set(s) (MOQ)
We are offering relative density apparatus. Relative density test apparatus: it is used to determine the relative density of cohesionless & freely draining soils, for which impact compaction will not produce a well defined moisture density curve. The maximum density produced by impact methods will generally less than vibratory methods.
Sdi Test Kit
Get Price Quote
Bulk Density Apparatus
Get Price Quote
1 Piece (MOQ)
Specially designed to study, the packing down of powder beds of different pharmaceuticals and chemicals in the process of tablet manufacturing, capsule filling & cosmetics. Installed with an automatic device for preset of strokes. Gear driven Noiseless and sturdy motor, also provided with an electronic time. Elegantly designed for smooth operation electrically operated on 230V AC, 50Hz.
Bulk Density Container
Get Price Quote
10 Piece (MOQ)
Cities
