Diaphragm Switches Dealers

We are the leading manufacturer, exporter and suppliers of Air Operated Diaphragm Level Liquid Switch in Maharashtra, India. This is a simple, cost-effective level switch which is manufactured using the finest quality raw materials. It can be easily installed and has been proven to maintain a long shelf-life. This switch is used for highly-viscous liquids, sewage & slurry.   Details :Simple, Cost-effective and easy to install switch with minimal maintenance  Range - upto 2000mm Wtd Parts - PP, SS316 Max Temp - 60oC Max Pressure - Atm Contact - 5A, 250VAC x SPDT Enclosure - Cast Al x IP66 Applications : Highly-Viscous Liquids, Sewage & Slurry

Measure pressures relative to atmospheric pressure and are divided into three main groups, each group being based on a different measuring principle. The majority of our pressure switches have a SPDT micro-switch fitted, including versions in ATEX approved housing, but where double pole switching is required, we can supply a range of pressure switches fitted with a DPDT micro-switch.Diaphragm Switchesconsists of either a corrugated metallic diaphragm or a synthetic rubber diaphragm. Metallic diaphragms are more versatile as the diaphragm can be treated to meet the majority of chemical applications, where as synthetic rubber diaphragms are limited to the compatibility of the synthetic rubber. The maximum pressure that diaphragm switches normally operate is 42 bar but they can be overload protected to 200 bar. Diaphragm pressure switches can also be set to switch in vacuum.Piston Switchesconsists of a piston that has a o’ring seal that is either mounted on the piston or in the body. Piston switches are normally used where the pressure is above that of diaphragm switches. Piston switches should not be used on gasses due to the inherent high friction that an o’ring has especially when pressure is not applied for a period of time. Piston switches are for high-pressure applications of up to 700 bar.Bourdon Tube Switchesconsists of a formed tube with one end fixed and the other end free to deflect under pressure and operate an electrical switch. Bourdon tube switches should be used for high pressure gas applications. Pressure ranges up to 600 bar can be supplied.

• Color: GREY
• Media Type: Gas
• Ambient Temperature: Ambient
• Brand: Baumer
• Power/Voltage: 220V /110 V
• Current Rating: 220V
• Size: 1/2" BSP

Various Ranges from 0 to 2 mm Wc up to 0 to 7 bar • Accuracy: +/- 1% FS • Temperature Range: -10 to 80 Degree C (for high temperature use of impulse tube is advisable) • Migration: Impossible • No. of Switches: one no. • Type of Switches: Micro Switches - SPDT • 1 A 230 V AC or, 2 A 250 V AC, 5 A 250 V AC • Housing IP 54, IP 65 & Flameproof • Pressure Housing Plastic, MS or, SS 316 • Sensing Diaphragm : Nitrile, Teflon or Neoprene • Process Connection hose fitting or, ¼” BSP (F)

• Material: Neoprene & SS
• Temperature: 0Dig C To + 60Dig C
• Range Coverage: 600 mbar up to 20 bar
• Used For: Sand, Powder, Ash, granules etc. as well as any liquids
• Installation Type: Installation will be from the bottom or, side wall of the storage tank, hopper or, silo
• Operation Type: Micro Switch operated having current rating of 5 or, 10 A 230 V AC

Boot Diaphragm type Level Switch (Hydrostatic type level Switch) Operates on gravity Pressure, and is suitable for solids stored in the storage tank, hoppers & silos.

Reliable and convenient, series AP pressure switch is a compact for instrument air or other low pressure applications. Visible set point and external adjustment add convenience. Used on air, non-corrosive gas or liquid service compatible with wetted parts. Unit also available in weatherproof and explosion-proof housing.

Varies ranges : from 0 to 150 mm wc up to 0 to 600 bar differential (dead band) : fixed (within 10% of set value) temperature range : -10 to 80 degree c (for high temperature use of impulse tube is advisable) accuracy : +- 1% to 2% fs no. Of switches : one no. Or, two nos. type of switches : micro switches - spdt sensing element : diaphragm (ptfe or neoprene or ss 316) or piston enclosure : dustproof ip 40, weatherproof to ip 54 ip 65 ip 66, flameproof

• Brand Name: TECHTROL
• Enclosure: Cast Al, W Proof IP 66
• Process Connection: Screwed 1" BSP (M) with integral 1/2" BSP(F) to hold air pipe
• Max Temp: 0 - 60 Deg C

We are offering air operated diaphragm switch. Compact, versatile, economical, 2mtrs range with 1 spdt contacts for sewage, slurries, viscous liquids, dirty oils in tanks open to atmosphere.( 60°c).

Economic and reliable operation available with several Diaphragm materials like Stainless Steel, Teflon, Rubber, for contact parts with the Bulk Materials. Low profile, adjustable sensitivity features are available.

We are offering pressure switch - diaphragm type.

Pressure Switches provide an ideal solution for pressure control applications requiring tamper proof external adjustment and environments which require water-tight NEMA 4 housings. single or dual control settings for both positive pressure and vacuum models, to 150 psi

• Cable gland: Pg 11
• Work ambient temperature: 60 degree C
• Protection: IP 40
• Normal sensitivity: 100 gm / 500 gm
• Microswitch contacts: 15 amp, 230 v ac, potential free

We offer Diaphragm Type Level Switches. Service : for all types of liquids and solids working principle : gravity pressure mounting : from bottom of the tank no. Of switches possible in one instrument : only oneswitch rating : 5 a, 230 v acmax. Switching distance from top of the tank 10 meters sensor moc : ss 304, ss 316 or teflonprocess connection : flanged or, triclover connection electrical terminal housing : pg9 connector, weather proof aluminium or, flameproof max. Fluid temp. : up to 150 degree c in standard version and upto 300 degree c in special versionsmax. Fluid pressure : 10 kg/cm2 application : only if sensor can be installed form the bottom of the tank for liquid switching application in storage tank.

• Brand Name: Protocontrol Instruments

We are offering Diaphragm Level Switch. Protocontrol offers Diaphragm Level Switch for detecting clogging of material on screw conveyor, Boot level detection of bucket elevator, & to detect level of food grain in hopper The pressure of the product on the membrane operates a limit switch inside the switch compartment. The contact of limit switch is used for control action. It is low cost but Reliable level switch, do not require power supply for operation and directly operates limit switch. Its Installation is simple. SPECIFICATIONS: Enclosure : Cast Al, IP 40 OP : 1 CO relay contact rated for 15 Amp resistive at 230 V AC Mounting : Flanged Pressure for detection: Approx 2 N min. Normal Sensitivity: 60 gm Operating Temp : 0 – 60 Degree Cent Diaphragm Material: SS Nitrile Rubber Particle Size: up to 30 mm and a density of 0.3 to 2.5 gcm3

Diaphragm Pressure Switch, Cylinder Mounted Gas Chlorinator

Diaphragm Switches, Children Footwear, Hawai Chappal, Ladies Footwear

Air Operated Diaphragm Switch, Digital Pressure Calibrator

Diaphragm Pressure Switch, Vane Type Flow Switch

Diaphragm Switches, metro dairy products, fruity, Bakery Ingredients

Diaphragm-Pressure Switch, Altair Gas Detector, Level Gauges Indicator

Diaphragm Pressure switches, Compact Pressure Switches

Boot Level Diaphragm Switch, tilt switches, Non Contact Microwave Switch

Diaphragm Switches, Bisleri Mineral Water, hydro, Silver drop mineral water

Diaphragm Switches, Sensoring and Monitoring