Direct Action Hand Pump Dealers (31 products available)

The Direct Action Hand Pumps, provided by us, are reckoned for their make and durability. Owing to our expertise in the domain, we are able to supply excellent quality Direct Action Hand Pump at very reasonable price. We have developed state-of-the-art storage facility, laced with all the necessary amenities, required for maintaining high-quality standards.

• length: 300 mm
• Noml Dia: 80,50

Direct action hand pump with a VLOM concept. Entire above the ground mechanism is of steel construction, hot dip galvanized to prevent from rusting. Direct action hand pump is suitable for lifting water from bore well with static water level not exceeding 15 meters. The cylinder assembly consists of cylinder pipe, piston, piston rod, food valve receiver, it provides necessary pumping action and lifts water upward through rising mains, the pump rod assembly provides linkage between pump handle and piston in cylinder, with its light weight and high displacement capacity, these rods are buoyant and help in reducing the effort required during upward stroke. The rising mains carries water from cylinder to pump. The hand pump is supplied along with a special type of combination spanner required for installation and maintenance and also a retrieving rod which helps in extracting foot valve assembly from cylinder for village level operational maintenance by communities.

• Discharge: 21 liter in 30 stroke in one minute
• Casing Size: 88 mm up to 18 meter, then 48 mm below 18 meter.

Static Water level require 10 mtr - 15 mtr Stroke length more than 500 mm due to Buoyancy Handle with come upward itself no force required to lift Handle. For easy maintenance, it can be disassembled with the help of two combination spanner even two female can repair it easily. All below ground components are made of UPVC (i.e. Riser Main, Pump Rod, Upper and Lower casing)

Deals in all over India. We provide best products at minimum rate....

• Material: Degchun Metal
• Application: Ground Water
• Weight: 20-30kg
• Automatic Grade: Manual
• Power: 100-500Bar
• Pressure: High Pressure, Low Pressure

We bring forth heavy duty Direct Action Hand Pump that is high on demand in the international market. Our PVC Fitting Direct Action Hand Pump is developed and designed as per IS 14106:1996. These direct action hand pumps are easy to handle and have extra durable life. Further, we are one of the ace Deep Well Direct Action Hand Pump Suppliers in India.   Static Water level require 10 mtr - 15 mtr Discharge - 21 ltr in 30 stroke in one minute Stroke length more than 500 mm due to Buoyancy Handle with come upward itself no force required to lift Handle Casing Size- 80 mm upto 18 meter, then 48 mm below 18 meter. All below ground components are made of UPVC (i.e. Riser Main, Pump Rod, Upper and Lower casing) For easy maintenance, it can be disassembledl with the help of two combination spanner even two female can repair it easily.

They are more cost-effective than other pumps for medium lifts (upto 15 m) and are safe from bacteriological contamination since all underground parts are made of non-corrosive materials like PVC or Stainless Steel.Cheaper than pumps which use MS riser Pipes,100% corrosion resistant,High Discharge-give water both in the upward as well as the downward stroke

we offer an ample array of direct action hand pump that is manufactured from the high grade raw materials. Our direct action shallowell hand pump provides long lasting excellent performance as it is highly durable and needs low maintenance. We have carved a niche as one of the prominent direct action water hand pump manufacturers, based in india. advantages can work upto a depth of 15 meters more cost effective than other deepwell handpumps all below ground components are of pvc or stainless steel and hence the pump is extremely resistant to corrosion can be easily installed and maintained using only the minimal tools supplied with the pump gives water in both the upward and the downward stroke of the piston direct action handpump works on the buoyancy principle and hence is easier to operate all the pipes, tools and pumps parts needed for complete installation are supplied with the pump.

This pump is basically India Mark II Hand Pump with few modifications in Head, Handle & Cylinder Assembly for extracting wate from greater depth. They are suitable for static water levels varying between 50 & 90 meters where placement of cylinders can be upto 85 meters.

They are more cost-effective than other pumps for medium lifts (upto 15 m) and are safe from bacteriological contamination since all underground parts are made of non-corrosive materials like PVC or Stainless Steel. Cheaper than pumps which use MS riser Pipes, High Discharge-give water both in the upward as well as the downward stroke.100% corrosion resistant.

• Cylinder Diameter (mm): 50 – 53.4

The Direct Action Handpumps are based on a buoyant pump rod that is directly articulated by the user, discharging water at the up- and down stroke. The pump head and the standing plate are made of galvanised steel and the handle of stainless steel. Pump rod and rising main are of HDPE or PVC pipes (with threaded connections) and the rest of the down-hole components are made of plastics. This makes these pumps completely corrosion resistant.

These pumps are widely used in every country in the world for a variety of industrial, marine, irrigation and leisure activities. There are many different types of hand pump available, mainly operating on a piston, diaphragm or rotary vane principle with a check valve on the entry and exit ports to the chamber operating in opposing directions. Most hand pumps have plungers or reciprocating pistons, and are positive displacement.

Ideal VLOM (Village Level Operation and Maintenance) design developed keeping in view maintenance problem - can be handled even by women. Capable of lifting water from depth up to-approx 45 Meters. Non-corrosive underground components capable of handling corrosive water situation thereby giving longer life. Light weight uPVC riser pipes; easy installation & inexpensive. Adjustable handle to suit varying installation depths. Inter changeable plunger & foot valves; easy to extract without removing riser pipes. Two options for pedestal design are available: a) Pedestal for concrete stand b) Pedestal of India Mark II design with either3 legs mounting or flange mounting arrangement. U-Seal, bobbins and 'O' ringsare of nitrile rubber and plunger rod of stainless steel. 10 mm dia x 3 Meters long mild steel hot dip galvanized rod with forged eye and hook connectors welded at both ends. This provides easy rod connections without use of any tool. Each rod is provided with a rubber centralizer to replace at village level. uPVC pipe 63 mm OD x 4.7 mm wall x 3 Meters long with socket-spigot cemented joint. Each pipe is provided with a rubber centraliser to avoid contact with casting pipe. Application Data: Min. bore size 100 mm Internal dia of Cylinder 50 mm Stroke length 225 mm Average discharge per stroke 0.44 Ltr. Operating depth upto 45 Mtr. (approx)

Hand pumps are manually operated pumps which are operated by muscle power and mechanical advantage to move fluids or air from one location to another. These pumps are widely used in every country in the world for a variety of industrial, marine, irrigation and leisure activities. There are many different types of hand pump available, mainly operating on a piston, diaphragm or rotary vane principle with a check valve on the entry and exit ports to the chamber operating in opposing directions. Most hand pumps have plungers or reciprocating pistons, and are positive displacement.

direct action pump, Rubber Neck Rings, Rubber Hollow Mat

• Brand Name: Sahni Sports
• Packaging Details: All Products comes packed in poly bags & then packed in master boxes. Customized printed retail boxes, Header Cards packing solutions are also available. Other packing facilities also available.
• Model Number: SA-FP02
• Logo: Can be Customized with Different LOGO Options
• Rod: Plastic Rod
• Quality: Best
• colors: Available in different colors
• Feature: Durable
• Certificate: ISO 9001 2008

We are main supplier of this product.

Direct Action Hand Pump, transmission line towers, telecommunication Towers

Direct Action Hand Pumps, Afridev Hand Pump, Force Lift Hand Pump

Direct Action Hand Pump

Direct Action Hand Pump

Direct Action Hand Pump