Dual Energy Meter Dealers

If looking for a compact, user-friendly and energy-efficient Meter that generates effective value measuring, then our Three Phase Dual Source Energy Meter (PEM-4135) fits the bill. It is compliant to the international quality norms. Get it from us in different specifications at cost-effective prices. We are bracketed amongst the noteworthy Manufacturers, Suppliers and Exporters of Three Phase Dual Source Energy Meter in India and abroad.Features: Displays Active Energy (kWh), PF, Active Power (kW), Voltage (Line to Line &Line to Neutral), Current, Frequency. CT Primary range 1A to 50kA programmable. CT Secondary range 0.5A to 5A programmable. PT Primary range 50V to 500kV AC programmable. PT Secondary range 50V to 500V AC programmable. Load hour for secondary source(DG) Smart voltage sensing(AC & DC)of secondary source Metering Standard- IEC 62053-21/22.

• Feature: Accuracy class 1.0 Compact flush panel mounting,Ultra bright 8 digit LED Display 0.36” with auto scaling capability,Optional EB/DG dual source input

Masibus EM 2140 Dual Source Energy Meter is an easy-to-use, low cost electrical Energy meter that offers all the basic measurement capabilities required for monitoring an electrical installation. EM 2140 Dual Source Energy Meter has 8 digit bright 0.36” LED display for superior readability in poor lighting conditions. LED indication has been provided for phase reversal as well as for all time healthy phase indication. EM 2140 is available in flush panel mount enclosure having front panel keys for easy set up. EM 2140 Dual Source Energy Meter has Class 1.0 accuracy as per IS 13779IEC 6205321. It has EBDG dual source energy measurement option for measurement of energy through Electricity Board or Diesel Generator. EM 2140 Dual Source Energy Meter provides energy measurement along with ON hour & RUN (Load) Hour, thus helping to measure and control energy cost.Meter stores energy and programmed parameters into its non-volatile Permanent memory.

• Display Type: Digital
• Body Material: Plastic
• Power Source: Electric
• Warranty: 1Year
• Brand Name: Invendis

Invendis ET4031 P & E with Serial Communication, Class 0.5, 85 - 270V AC/DC, 415 V, 3 Phase, 5A, 3 R 3 DIGIT 0.56", Dual MeteringkW,kWh Eb, kWh Dg, Protocol Maodbus as per Scnider Register Mapping (obsolete) Configuration : 1/3 Phase, 3 Element; 3 / 4 Wire (Note Order code) Input V Nominal : 415 V LT or 110 V through PT (line to line)                                            Computation : True RMS for all Power & Energy Parameters Accuracy : ± (0.5% of FS + 0.5% of Rdg + 1 digit) ± 0.2% for Frequency ± 1.0% of FS for Current                                                                                                                              Isolation : 2000 V AC for one minute Safety : Measurement Category III, Pollution Degree 2 as per EN61010-1 First Edition                                      Frequency : 0.1 Hz Power : autoscaling depending on input Power Factor : 0.01 Energy : 1 kWH upto 866 kW 10 kWH above 866 kW

We are instrumental in manufacturing, supplying, exporting and trading dual energy meter. Employing modern machinery and cutting-edge technology, these meters are manufactured with user friendly features, owing to which demanded for generator panel & capacitive power plant, oem application, test benches and laboratory equipment. Ideal for industrial environment, these meters are extensively demanded by our customers. Features: compact size high performance varied specifications details: true rms measurements accuracy class 1.0 2 –line, 16 char back lit lcd display confirms to is-13779 iec-62052-11& iec-62053-21 ct ratio- selectable from 55 to 30005 rs 485 modbus communication port compact and ideal for industrial environment display parameters: e.b energy ( 6.3 format) d.g energy (6.3 format) line voltages (vr, vy, and vb with respect to neutral) line currents (ir, iy, and ib) line frequency average power factor lag or lead active power- r ph, y ph, b ph & summation eb on hour dg on hour l.e.d indications: presence of phases (r, y, b) reverse polarity presence of d.g source specifications: accuracy class class1.0 frequency 50hz ± 5 % system voltage 415v ac110v ac auxiliary 40-275v acdc operating temperature -5°c to + 55°c ct ratio-field programmable 55 to 30005 in steps of 5 power consumption-sensing voltage current input auxiliary less than 0.2 va, less than 0.2 va, less than 5 va weight 300 grams models pdm9023 – 3ph. 4w dimensions 96x96x70 mm (wxhxd) mounting flush impulseskwhr 15000 applications: electrical panels- ht & lt panels generator panel and capacitive power plant oem application test benches and laboratory equipment

We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. As we promise to offer quality approved products to the clients, we make use of only high-grade raw materials selected from one of the best sources present in the market.

Dual Source Energy Meter (EB & Genset). The Meter records the Energy count, run hr, on hr, interruptions & stores the old Energy separately for both the sources with 2 separate displays for EB & Genset. CTPT primary programmable. Optional MODBUS (RS485) & pulse op

• Certification: CE Certified
• Weight: 1-2kg
• Voltage: 3-6VDC
• Application: Energy Monitoring
• Frequency: 50Hz-65Hz
• Warranty: 1Year
• Model No: EL 31

Model EL 31 Dual LCD Meter. the Meter is Compatible with Prepaid System Software for Data Transferring to Remote Pc and Receiving Commands for Tripping of Power Supply in Case of Overloading of Max Demand and Zero Balance in Customer Accounts. It Displays Kwh, Kw, Max Demand; Id No Ctf and It Record the Power Consumption of Both Sources Separately. Provided with Rs 485 Port and Mdi Auto Cut Off.

EM 9024 is a new approach in the Field of EB/DG Energy Measurement. Separate Energy and Run hour measurement is made for both EB/DG. Communication is provided for monitoring of data's through MODBUS RTU Protocol.   features True RMS measurement 3 or 2 Element measurement Confirms IS14697 for Accuracy Class 1 Programmable PT/CT Primary Direct reading without multiplication factor Low PT, CT burden. (Less than 0.2 VA) Energy storage in EERAM Auto scaling from Kilo to Mega Reverse indication for proper connection Measures 4 quadrant power and records import energy Digital Calibration by software Quick & easy to install Replace 2 Nos. energy meter in the panel Only one potential free contact is required to differentiate EB/DG Displays kW, kWh & Run hour Separate kWh and Run hour registers are provided for EB/DG EB/DG selection displayed by LED kWh range 9999999.9 kWh(LT), 99999999kWh(HT) Run hour range 9999.59 hours

• Phase: Single
• Brand: Elmeasure
• Voltage: 300V
• Type: Digital
• Weight: 295g
• Operating Temperature: 65 Degree C
• Color: Grey
• Model Name/Number: LG+5220
• Usage/Application: Industrial
• Current: 4A
• Screen Size: 4x8cm
• Accuracy Class: Class 1

• Model Number: LG+5220
• Accuracy Class: 0.5/1.0

• Feature: reliable and consistent accuracy .
• Color: grey
• Brand: hexing
• Model: kp115

Masibus EM 2140 Dual Source Energy Meter is an easy-to-use, low cost electrical Energy meter that offers all the basic measurement capabilities required for monitoring an electrical installation. EM 2140 Dual Source Energy Meter has 8 digit bright 0.36� LED display for superior readability in poor lighting conditions. LED indication has been provided for phase reversal as well as for all time healthy phase indication. EM 2140 is available in flush panel mount enclosure having front panel keys for easy set up. EM 2140 Dual Source Energy Meter has Class 1.0 accuracy as per IS 13779IEC 6205321. The CTPT ratio and installation type is site selectable, making the meter possible to be used in various types of three phase installations. More than a basic metering, it optionally provides RS485 port with ModbusRTU protocol & also Relay Pulse output. It has EBDG dual source energy measurement option for measurement of energy through Electricity Board or Diesel Generator. EM 2140 Dual Source Energy Meter provides energy measurement along with ON hour & RUN (Load) Hour, thus helping to measure and control energy cost.Meter stores energy and programmed parameters into its non-volatile Permanent memory. Features of Dual Source Energy Meter Accuracy class 1.0 Compact flush panel mounting Field programmable CTPT ratio

• Dimension: 96x96x57 mm.
• Voltage: 500V

Microcontroller based meters with low VA burden, 6 digit seven segment display, CT primary range 1A to 50kA AC programmable, CT Secondary range 0.5A to 5A - AC programmable, PT primary range 50V to 500kV AC programmable, PT Secondary 50V to 500V AC programmable, Password protected- True RMS measurement of parameters, Auto scaling of parameter values, AutoManual scrolling of parameters, Three switches for easy onsite programming. Touch proof voltage & current terminals. Compact size and light weight. ABS dust-proof rugged casing. Load hour for secondary source(DG) are displayed in dual energy meter, Smart Voltage sensing(AC & DC)of secondary source in dual energy meter, Watt Hour displayed with Kilo and Mega indication.

We are an ISO 9001-2008 certified company that is an established Manufacturer and Supplier of Dual Source Energy Meter from Haryana, India. The Dual Source Energy Meter offered by us can precisely measure dual power source like EB and DG, making them useful in various industrial sectors. Our energy meter is a rage all over India for its robust design and excellent performance. Clients can contact us for delivering bulk orders of Dual Source Energy Meter all over the country.Features : High overload Two alarm output Robust steel base Low power consumption Direct connect operation Effective value measuring Multi function LCD Kwh Meter

Energy meter with LED display, eight digits to display energy and four digits to display additional parameters, optional communication port available. 7 segment LED Display Site Programmable CT & PT Ratio True RMS Measurement Password protection Maximum Demand with relay contact Optional Features: RS485 computer interface (only for VIPS 84P) 60A direct current(external CT Module available) Harmonic measurement (total and individual) Auto ranging Universal auxiliary supply

Elite Dual Register is a compact, digital, multifunction panel mount meter for measurement of both mains supply and DG supply. It therefore eliminates the need of maintaining two separate energy meters for dual source energy metering. This three phase CT PT operated meter, also supports load control and disconnects the consumer if load exceeds a certain limit. Separate load limits are available for mains and DG operation.

VL-L, VL-N Phase wise & Avg.Ampere phase wise & Avg. Hz,PF Phase wise & system, Active,Reactive & ApparentPower phase wise & Total,Active energy, Reactive inductive energy,Energy 0.1 kWh, PF 0.001, Hz 0.01 & Auto ranging for Voltage, Current & Power.

Prok dv's make Digital Microcontroller Based Three Phase Dual Kilowatt Hour (Kwh/EnergyMeter) offer the latest technology, user friendly features. It is Designed with features like –selectable CT ratio, RS 485 communication port, Dual source Energy recording with displayof voltage, current, frequency power factor, Active power, EB&DG ON Hour. Specification True RMS measurements Accuracy class 1.0 2 –Line, 16 Char back lit LCD display Confirms to IS-13779/ IEC-62052-11& IEC-62053-21 CT ratio- selectable from 5/5 to 3000/5 RS 485 MODBUS Communication Port

Built on the advanced Atlas metering platform, the Mk10D is a variant of the reliable Mk10. The Mk10D adds a 100Amp relay integrated into the meter, which allows disconnection or reconnection of electrical services remotely.AMI Ready Disconnect Relay Large Data Storage Large LCD Display Upgradeable Prepayment Anti Tamper