Epoxy Zinc Phosphate Primer Dealers (25 products available)

• Application: Brush, Roller
• Packaging Size: 1-5 L
• Type: Epoxy Red Oxide Zinc Phosphate Primer
• State: Liquid
• Country of Origin: India
• Finish: High Gloss
• Shade: Red Oxide
• Substrate: Metal
• Recommended Use: Better Acid Resistance Because of Addition of Zinc Phosphate with Red Oxide

• Brand Name: Saffro Mellow
• Application: By Brush / By Conventional Spray
• Type: Epoxy Zinc Phosphate Primer
• Country of Origin: India
• Finish: High Gloss,Matt
• Packaging Type: Plastic Bucket
• Shade: Grey
• Solids By Volume: 40 ± 3%
• Theoretical Spreading Rate: 13.33 sq.mt. / ltr. at recommended DFT of 30 µ
• Flash Point: Base : Above 23°C Hardener : Above 23°C
• Drying Characteristics: surface Dry : 60 90 Minutes
• At 65% Relative Humidity & At 30°c: Hard Dry : Overnight Full Cure : 7 Days
• Shelf Life: Base : 6 Months Hardener : 6 Months
• Mixing Ratio: Base : Hardener (as per Our Recommendations)
• Thinner: Epoxy Thinner 190
• Pot Life: 4 hours min at 30°C
• Recommended Dft: 30 - 40 µ.
• Overcoating Interval: Min : 8 Hours Max : 24 Hours
• Compatibility: Can Be Over Coated with Epoxy, Pu, Chlorinated Rubber and Oleo-resinous Topcoats.
• Addition: 10-15% & Max 5% if Required
• Nozzle Orifice: 1.2 -1.4 Mm & 0.37- 0.42mm
• Nozzle Pressure: 40-70 psi & 1400-1800 psi

• Color: Ivory
• Finish: Gloss
• Packaging Size: 20
• Brand Name: Jyoti
• Primer Base Type: Oil Based
• Form: Liquid

EPOXY ZINC RICH PRIMER   We offer Epoxy Zinc Rich Primer with high quality Zinc Dust to our valuable client which gives huge benefits over the normal Iron oxide. The Zinc pigment in dry film provides an excellent protection to steel surface, tanks, pipelines and plant components in both interior and exterior surfaces exposed to damaging conditions. It also provides catholic protection to steel and gives good resistance by undercoating of damaged areas. It can be over coated with wide range of top coats. Technical Data: Composition: Epoxy Resin Pigmented with Zinc Dust Color: Grey Finish: Matt Mixing Ratio:  4:1 by Volume Recommended DFT: 50-60 microns Zinc Dust Content on DFT 90+2% Theoretical Coverage: 13 to 15 sq. met. at a recommended DFT Application: Airless spray or brush Pot Life: 2 to 3 hours at 30 C Shelf Life: 06 months (of individual components) Drying: Surface Dry:10-15 minutes, Hard Dry: 1 to 2 hours, Full cure: 7 Days Over coating Interval: Overnight Maturation Time On Mixing: 10-15 mins Spraying Viscosity: 20+2"/FC - 4 at 30 C Temperature Resistance: 300 C dry heat Flash Point: Above 25 C Compatibility: Tack-free: Can be over coated with all type of paints

• Color: Grey
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L
• State: Liquid
• Finish: High Gloss
• Abrasion Resistance: Yes
• Water Resistance: Yes
• Method of Application: Brush, Spray, Roll

• Brand Name: Omkar
• Application: Brush
• Packaging Size: 1 to 15L
• Primer Base Type: Oil Based
• Form: Liquid
• Method of Application: Spray

Features & Advantages: Easy to apply and improved adhesion Resistant to abrasion and moisture etc. Makes a good surface finish Used as a proper base for consequent priming Corrosion-inhibiting with good chemical resistance Application Area:As primers, our epoxy coatings are used widely to improve adhesion of metal surfaces and perfect for steel, iron and aluminum, concrete etc. A dry & clean surface is requisite before applying the primer. It is recommended for steel structure protections. The epoxy primers are also important in structural steel coatings.Some application areas include: Plant structure & piping Fertilizers, food & pharmaceutical units Petrochemicals and chemicals Bridges & conveyors Marine applications Power plants, steel plants, paper mills, etc.

• Color: Multicolor
• Application: Appliance Paint, Boat Paint, Car Paint
• Application: Spray Gun
• Packaging Size: 20-25 L
• Finish: High Gloss
• Minimum Order Quantity: As per Client Requirement