Fiber Laser Marker Dealers

Fiber laser marking is a technique which uses computer-controlled laser beam to leave permanent mark on the surface of various kinds of object. The working principle of fiber laser marking machine is to use light amplication to cause chemical effect or burn part of the material to mark letters, symbols, bar codes, and other graphics on an object. Fiber laser marking machine is mainly composed fiber laser, laser scanning galvanometer and controller. The fiber laser has the advantages of small size, high quality beam, no maintenance and etc. The output center wavelength of fiber laser is 1064 nm and the life time is around 100,000 hours. Compared with other king of lasers, fiber laser has a long life. Advance Features1. Can mark both metallic and nonmetallic materials, especially those materials with high hardness, high melting point or brittle materials.2. High processing speeds, low operation cost, constant high quality and durability of the results, high flexibility in automation. Laser marking is a perfect choice for mass production.3. Laser marking is non contact type of marking so it doesn't produce stress on the materials. It will not alter the physical properties of the materials processed.4. Laser is a clean and safe process as it is chemical-proof, water-proof, oil, grease & fuel proof.5. As the laser beam spot size (after focusing) is small, the heat-affected zone is much smaller, thus allowing it to achieve fine processing that other conventional methods cannot.6. Laser Marking is a flexible process as one can mark texts, alphanumeric, logos, bar codes, graphics, images, 2D data matrix code, etc.7. It is a user-friendly and cost effective marking solution as virtually no consumables.8. Laser marking enhances the aesthetical & monetary value of products by making it more attractive & eye catching ApplicationsLaser marking machine is widely used in most kind of products in different industrials, such as integrated circuit chip, computer accessories, industrial bearings, watches and clocks, electronic and telecommunication products, aerospace parts, auto parts, home appliances, hardware tools, molding, wire and cable, food packaging, jewellery, and etc.

The optical fiber laser marker is the third generation laser marker system developed by our company with the most advanced technology in the world. It uses optical fiber laser to output laser and realizes marking function through high speed scanning galvanometer system. The optical fiber laser marker features high electro optic conversion efficiency, air cooling, small size, high quality output beam, high reliability, long service life and energy saving. It can carve metal materials and certain nonmetal materials and is widely used in fields that have high requirement on depth, smoothness and fine, such as stainless steel mobile phone overlay, clock and watch, mould, IC, mobile phone keypad, etc. Bit map marking can carve beautiful pictures on the surfaces of metal and plastic, and the marking speed is 3-12 times of the speed of traditional first generation lamp pump marker and second generation semiconductor marker.   10W Air DPSS OEM in a new Nd:YVO4 laser marker system which can work on any type of metal and almost all industrial use plastics. The system consists of two parts: resonator unit-scnaeer head and power supply box and control. A 3 m optical fivre and signeal cable allow the power supply box to operate remotely. A notebook with the customs interface card and SLC (MLS LASER CONTROLLER).  Features Control: PC Windows with PCI or USB card, RS232 Software MLS Laser Controller Interfaces: PLC, data network (ethernet), I/O digital, axis control, other auxiliary devices Software: developed completely by MLS. Elaborates data or images to be marker and manages laser and all connected devices. Files can be imported in SVG, BMP, JPG, HTML, PLT.

Fiber laser marking machine is the most accepted technology among the laser marking systems due to its versatility,minimal maintenance and nil requirement of consumables. Unlike Co2, it uses optical fiber doped with rare earth element as a laser source and can mark with much more intensity comparatively. It provides best industrial solution for product identification and traceability. When 20w fiber laser marking machine is used as metal marking machine, it is used to mark barcodes, serial numbers, QR codes, personal details ,graphics etc on materials like autocomponents, steel labels, etc. Video

Introdection The fiber-optic laser marker is the third generation laser marker system. It uses optical fiber laser to output laser and realizes marking function through high speed scanning galvanometer system.The fiber-optic laser marker features high electro optic conversion efficiency, air cooling, small size, materials and widely used in the fields that have high requirement on depth, smoothness and fine, such as stainless stainless mobile phone overlay, clock and watch ,mould, IC, mobile phone keypad, etc. Bit map marking can carve beautiful pictures on the surfaces of metal and plastic, and the marking speed is 3-12times of the speed of traditional first generation lamp pump marker and second generation semiconductor marker. Features Fiber optic is used to output laser, featuring high electro optic conversion efficiency, small size and high light beam quality. Suitable materials and application It is widely used in fields that have high requirement on depth, smoothness and fine, such as clock and watch, mould, bitmap marking, etc.Model BM-F10 BM-F20 BM-F30 BM-F50 BM-F100 Laser power 10W 20W 30W 50W 100W Laser wavelength 1060nm Repeating frequency 20-100KHz Light beam quality

We are offering fiber laser marker, laser machine, laser equipment. Application : all metal marking deep engraving ( die engraving) 3d engraving jwellery hallmarking switch gear marking thin metal cutting highest engraving depths of 2 mm. ( more than any other laser available in market)

We offer technologically advanced fiber optic laser marker, which is used for marking all kinds of metals, plastics and many more. We are a reliable manufacturer and exporter of fiber optic laser marker, which is in high demand for its high performance and quality across the globe. Features single phase with extremely low power consumptionlife of fiber about 100,000 hrssmall in size, occupies very less areabeam quality very sharpeasy and stable in operationair-cool machine apt for all metalsmobile phonesdigital electroniceyeglassesclocksmold industryelectrical appliances

Pioneers in the industry, we offer portable compact fiber laser marker from India. Being a market leader of this domain, we provide patrons with the premium quality of Portable Compact Fiber Laser Marker. Fabricated with fiber laser technology, the portable compact fiber laser marker is known for its ultra compact design where no external power source or controlled are required. The portable compact fiber laser marker is compatible with m85 f-theta lenses. Features: No fiber delivery constrains Ultra compact, “ALL-IN-ONE” design No external controller or power supply needed No fiber length or bending radius limitations DLA’s Standard I/O interface

Top of the line - mean and tough industrial lasers for small to heavy parts. Finest quality components procured from around Europe are integrated by our experts to perform even the most difficult industrial assignments. These mean machines can mark clean and crisp lines and produce finest quality deep engravings in 2D. Blackening and color marking on an array of materials is done with ease. Last but not the least, integration into industrial automations is also done by our separate automation division. The key features of these machines are as under: * +120,000 Hours of expected laser lifetime.* Compact air cooled design with very smooth Motorized Z axis movement for plus 80 kgs.* Enabled for future automation like Rotary/ Indexing Table without any change of cabinet.* Operating temerature is 47°C.* 3 way working area for higher production.* Highest marking quality beam diameter < 32 Microns.* Foot switch operated.* 3 way Red pointer for mark preview.* Markolaser - 20 watt.* Optional Suction Unit.* Very high speed.* More user friendly design.* Enhanced design for placing it in online production or online marking.* No Chinese components used, mostly UK / German / French / Japanese.* Onboard swiveling (faces operator on both sides of LED monitor and computer).* Comes with a safety tower light.* 2 years warranty complete laser.* Excellent after sales service by a highly qualified & experienced technical support * Team with low cost of ownership and maintenance. OPTIONALS: * Rotary device : 50g to 50 Kg load options.* Indexing tables : 2 stations to 36 stations.* Conveyors : 0.5mts to 20mts/minute options.* Mark on fly : Marking parts while moving.* Jigs and fixtures : Teflon/Aluminium or other materials.* Automations : Please discuss with our team for auto loading and unloading.* Fume extractors : Special safety enclosures to comply with CE and class 1 laser regulation.* DE-series is excellent for general purpose 2D deep engraving functions, comes in 20W/30W.* High Speed.    

Fiber laser welder equipped with a Maximum 50W oscillator. The marking software has been replaced with the latest version of LM Draw 6 which is compatible with other AMADA MIYACHI's laser markers. It still keeps outstanding performance of high-speed and high-quality marking on metals and even plastics due to pulsed waveform control feature and becomes clearer deep-engraving and black-marking possible.   Fiber Laser Marker       + 20W/50W Fiber Laser Marker