Finned Tube Heat Exchanger Dealers

We bring forth for the customers an easy to clean and easy to use range of Finned Tube Heat Exchangers. We are a notable Manufacturer and Supplier of Finned Tube Heat Exchangers from Haridwar in Uttarakhand. We use the finest quality aluminium and other raw material in the fabrication of Finned Tube Heat Exchangers that have service life of up to 30 years. We offer reasonably priced Finned Tube Heat Exchangers that are corrosion resistant and incur low maintenance cost.

The Finned Tube Heat Exchangers of are used for both cooling and heating of air, water and gas. We offer these in different forms including continuous spiral wound fins, G type, L type and wire wound fins. The materials used for manufacturing the tubes are aluminum, copper, SS, admirably brass, carbon steel, cupro nickel etc.

Heat exchanger with finned heating surfaces, so-called finned tube heat exchangers are widely used in Rotary Dryer which offers the possibility of heat transfer between Air and liquids significantly space-saving and is more. Finned tube heat exchangers are designed to transfer heat from clean air and gases with high efficiency on liquids or vapors. In this way the Air can be heated in a closely space. APPLICATION Rotary kilns are used for the calcinations of Titanium dioxide, Illeminate, kaolin, Barium Carbonate, Magnesium Carbonate, Silica Gel, Lime, Activated Carbon, Vermiculite, Barium Sulphide, Magnesium Oxide, Petroleum Coke, Clay, Gypsum, Alumina etc.

FTH is a pressure vessel which cools a circulating fluid within finned tubes by forcing ambient air over the exterior of the tubes. It does not required water. Major Elements of Finnned Tube Heat Exchanger: Tubes, Fins and Fan (Actuating Device for Heat Transfer) Finned Tube Material: The material selection is made as per Process Application, And Cost of Heat Exchangers   We use following materials for Constructions: Carbon Steel, Stainless Steel, Admiralty brass, Copper and Exotic Alloys, Seamless, and Welded Stainless Steels, Seamless, and Welded, 2205 Duplex, Copper Nickel, Admiralty Brass, Titanium.

Combining outstanding quality and value, our firm offers a wide assortment of Finned Tube Heat Exchangers. The offered Finned Tube Heat Exchangers are designed and manufactured by the experts as per the international standards and requirements of the clients. These Finned Tube Heat Exchangers are widely used by the industries for cooling or heating of air and other gases which flow in a duct or cooling of water using air.   Features:   Hassle-free operation Optimum performance Highly durable

We are offering Plate-fin heat exchanger is one of the most efficient compact heat exchanger. The gaps between constitute a fluid layer. A core is made of a great number of layers. The exchanger can be made of one or more cores. The number of plate and fin layers, the size of the plates and fin, the height of the fin and the type of fin are engineered for optimum performance. The core is assembled (stacked) and typically held together by tack welding a weld rod to the top and bottom layer of the core. The stacked core is then placed within a fixture that exerts force on the individual pieces to keep them in contact. The part is then vacuum brazed in an environmentally-controlled room to ensure high quality and reliability. After brazing the core is typically heat treated or aged in order to increase its strength. Manifold ducting and mounting brackets are then welded in place as required, and any required paint or coating can be added.

We are leading Manufacturer, Supplier and Exporter of Finned Tube heat exchangers, chennai, India that is manufactured by using high grade raw material as per the client’s requirements. Our range is available in various sizes & specifications and is widely used in different rice mills. These are appreciated in the worldwide market and are offered at the competitive prices.

Finned Tube Heat Exchangers consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat transfer from a liquid to a gas, vapor to a gas, such as steam to air heat exchanger, fluid to air heat exchanger. When an extended surface is needed on only one fluid side (such as in a gas to liquid exchanger) or when the operating pressure needs to be contained on one fluid side, a finned tube heat exchanger may be selected. Applications of finned tube heat exchangers include Steam air heater / steam radiator, fluid air heater / fluid radiator, Hot water air heater / hot water radiator, Air heater for fluid bed dryers, Air heater for spray dryers, Air heater for flash dryers and Air heater for dryers. These are manufactured using high grade carbon steel, stainless steel, copper, brass and aluminum. Our Finned Tube Heat exchangers are designed to meet the specific duty condition, temperature and pressure of the fluids. WE MANUFACTURE HEAT EXCHANGERS WITH THE FOLLOWING TYPE OF FINNED TUBES : 1) G Fin Tubes 2) KL Fin Tubes 3) L Fin Tubes 4) LL Fin Tubes 5) Wire Fin Tubes The advantage of finned tubes is that by increasing overall heat transfer rate, the total number of tubes required for a given application is reduced, thereby also reducing overall equipment size and decreasing the cost of the project. In many application cases, one finned tube replaces six or more bare tubes at less than 1/3 the cost and 1/4 the volume.  

We HEAT-COOL FIN INDUSTRIES manufacture finned tube heat exchangers which are known for its effective functioning among our valued clients. Finned Tube Heat Exchangers is the appropriate solution where, low heat transfer fluids and low density fluids are to be exchanged with the high heat capacity stream. Tubing is formed in these exchangers in a single, continuous length which is bent into a zigzagged or serpentine shape & then inserted through elongated slots formed in a series of fin plates. Finned Tube Heat Exchangers manufactured in accordance of requisite norms and standards. Some of Finned Tube Heat Exchangers features are: High durability Low maintenance cost Trouble free operation

 To determine Heat transfer rate of heating & cooling• To Calculate L.M.T.D.• To determine Overall Heat Transfer Coefficient Based on Internal & External Area of Tube• To calculate Effectiveness of heat exchanger• The experiments can be conducted at various values of input & calculation can be made accordingly