Graphite Bushing Dealers

We provide carbon filled bushes and carbon filled PTFE sheet which helps in raising the thermal conductivity and requires less carbon fiber than the glass fiber to attain the same effects. Furthermore, it can be easily customized in accordance with client requirement and is delivered on time.

Graphite impregnated bronze slide plate is a self-lubricating bearing plate made up of a high quality bronze with graphite filled grooves. The bronze plate acts as the bearing surface, withstanding heavy loads, while the graphite inserts provide a solid, oil-free lubricant. The formation of lubricant forms a film of graphite between the bearing and mating surface which results in low co-efficient of friction upon the start of relative motion.

We are engaged in supplying and exporting of Graphite Filled Bronze Bushes based in Delhi, India. Majorly used in steel rollers and mineral machines, the offered Bronze Bushes are appreciated for their precise design, smooth surface and requirement of low maintenance. Customers can obtain Graphite Filled Bronze Bushes from us at highly reasonable rates.   Features : Dimensional accuracy Sturdy construction Rust resistance Specifications : Material -  Germany DIN CuZn 25A15 Japan JIS HBcC4 England Standard HIB 2 Temperature Limit -  -100oc - 300oc Max Speed limit -  10 m/s Max Load Capacity -  150 N/mm2 Alloy Hardness - HB 250 Friction Coefficient -1. Oil Lubrication - 0.03. Dry friction - 0.16 Max PV Value Limit -  200 N/mm2 .m/min Density -  -8.0 g/cm2 Tensile Strength -smaller than 780 Elongation -  Smaller than 4 %

We make available sturdy Graphite Bushings in customized sizes. Our payment procedure can be both physical and electronic. Physical modes can be cash payment, bank deposits and others. On the other hand, our electronic modes include instant payment gateway. All those who are looking for a responsible name supplying Graphite bush can get in touch with us!

We are offering graphite filled bronze bushes. Material : high tensile manganese bronze composition : cu= 60 ã¢ï¿½ï¿½ 68% al= 3-7.5% fe= 2-4% mn= 2.5-5% zn = balance. Hardness : 180-210 bhn load : 750 nmm2 pv value : 20 ncm2 details : it has a backing made of high tensile manganese bronze with a special filling of prescription of solid lubricant inserted with certain angle & density into the surface and processed with precision finishing. It is mainly used for high load and moderate speed application. Bushes & plates can be developed with any specifications as per customers requirements. applications of oilless bearings where it is inaccessible or difficult to lubricate bearings. Where hours for design, assembly and maintenance need to be saved. Where it is difficult to lubricate bearings due to high low temperature. Where minimum space is required for bearings. Where corrosion resistance or waterproofing is required. Where there is dust in the operating environment. Where oil contamination is not desired. Where high load and low speed operation that does not accept lubrication is required. Where oscillation, reciprocating or frequent start and stop operations that makes lubrication insignificant are required. Where deterioration of lubrication oil occurs due to non-maintenance for a long time.

Carbon/graphite bushes & bearings are made in special grades beyond the limits of other materials. These are self lubricants and has a polishing effect upon the shaft against which it rubs, as such the wear rate is low. Also these can run dry and suitable for condition where oil contamination is avoided. These are also unaffected by acids & alkalies and suitable for use up to high temperatures. Carbon impregnated bush bearings in two halves especially developed for stokers of boiler, replaced the cast iron bushes gives most satisfactory result, Because of dry running & high lubricant properties. Features: Thermal power stations Chemical plants Petrochemical units Textiles Fertilizers, etc

Properties1 Excellent self-lubrication 2 Remarkable chemical corrosion resistance 3 High thermal conductivity and good thermal stability 4 Adequate mechanical strength and shock resistanceApplication: Resin Impregnated Graphite Parts are widely used in equipments of modern industry, such as seal rings for centrifugal pumps reacting kettle for chemical engineering, hydraulic generators and rotate baking furnaces; piston rings and bushings for compressors oxygen machines and bellows, bearings for screen motors and other types of instruments; slides for motors, subways and mine brushes of electrical machinery and slides for trolleybuses, etc

GRAPHITE BUSH WITH SS EYELET Flexible graphite sleeve with SS eyelet Made by compressing spirally wrapped graphite tapes and SS eyelet High purity of graphite with low chloride, sulphur, fluoride, ash content etc with no binders Self lubricating packing with extremely low friction characteristics, resistant to water, steam and oil Suitable for high pressure and high temperature applications. Packing sleeves are used in many brands of gauge cock, to prevent leakage and to ensure effective operation. The controlled compression ensures a standard, quality product

We manufacture and supply Carbon Graphite Bearing Bush for the production of various mechanical components. The Carbon Graphite Bearing Bush, we offer has high temperature bearing properties and efficiently provides long time services.

Carbon Graphite Bushes, offered by us, have excellent resistivity to high temperatures. They are largely used for the production of various mechanical components. We have adequate infrastructure and resources to manufacture superior quality Carbon Graphite Bushes as per the buyer’s requirements and specifications. We are a reliable Carbon Graphite Bushes Manufacturer, Exporter and Supplier in Punjab (India). We make them available at highly affordable prices. Also, special care is taken in the packaging of our product to deliver a flawless range of our valuable customers.

PTFE tubes bushes are available in all sizes with OD ranging from 15 to 800 mm and ID ranging from 10 to 700 mm. Meeting the needs of the customers in terms of time and value, without compromising on quality has been the motto of Aflon all along.

We are offering graphite filled bronze bushes. Material : high tensile manganese bronze composition : cu= 60 ã¢ï¿½ï¿½ 68% al= 3-7.5% fe= 2-4% mn= 2.5-5% zn = balance. Hardness : 180-210 bhn load : 750 .

Leveraging on our vast industrial knowledge and experience, we are engaged in offering a broad assortment of Self Lubricating Graphite Bush. These products are fabricated making use of premium quality raw material and in agreement with the industry set standards. Moreover, our quality controllers test this bearing against various well-defined quality parameters to eradicate any possible defect. We provide the entire range of product at affordable price in a given time.

Graphite impregnated bronze slide plate is a self-lubricating bearing plate made up of a high quality bronze with graphite filled grooves. The bronze plate acts as the bearing surface, withstanding heavy loads, while the graphite inserts provide a solid, oil-free lubricant. The formation of lubricant forms a film of graphite between the bearing and mating surface which results in low co-efficient of friction upon the start of relative motion.

High Strength Yellow Brass Castings, We supply Graphite Filled Bronze Bushes with the following specifications:

Graphite Bronze Bush, Dam Roller Gate, Leaded Tin Bronze Bus