Horizontal Cylindrical Autoclave Dealers (64 products available)

• Inner tank capacity: up to 240 liters

We are manufacture of laboratory Autoclave, Horizontal Cylindrical Autoclave Manufacturer, Cylindrical Autoclave Supplier, portable Autoclave, vertical Autoclave, fully Automatic Autoclave, cement tile testing Autoclave, Double Door Autoclave, Horizontal Autoclave Cylindrical, Horizontal Rectangular Autoclave, Small Autoclave Front Loading Autoclave, Dental Autoclave, Laboratory Vertical Autoclave, Triple Walled Autoclave and Bench top Autoclaves etc.

• Display: A separate temperature indicator is provided.
• Exhaust of Pressure: Automatic through a manual exhaust valve
• Working Temperature: 121ºC
• Sterilizing Pressure: 1.2 kgf /cm² (15 psi) at 121ºC
• Operating Pressure: From 15 Psi to 20 psi
• Pressure Gauge: 0-2.1 kgf /cm² (30 psi)
• Power supply: 220/230V AC, 50/60Hz or 430/440 Volts, 3 Phase Supply
• Gasket: Made of Jointless Silicon Rubber

Our Horizontal Tripled Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms. It is an ideal instrument for Laboratories, Hospitals, Nursing Homes, R & D Labs etc. These are widely used for mass scale sterilization procedures where dryness of the sterilized medium is of paramount importance, given the fact that semi dry sterilized media is prone to various micro-bacterial and viral infections. SALIENT FEATURES: Steam Stock Provision Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection CONSTRUCTIONS: Triple walled unit horizontally mounted on a sturdy, heavy M.S. duly painted or stainless steel tubular stand. Both inner chamber and outer wall made of S.S. Pressure is adjustable from 5-20 psi. Sterilization Cycle is controlled by Multiport Valve. Fitted with pressure gauge, safety valve and steam release valve. Fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided. Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation. STANDARD CONTROLS: Automatic Low Water Level Cut-Off Device fitted for general safety of the element. Fitted with Automatic Pressure Control Switch. Fitted with dial thermometer to indicate the inner chamber temperature. Lid is made of thick machined Mild Steel plate lined with stainless steel from inside Supplied with jacket (Double walled chamber with separate boiler). Industrial grade energy efficient heaters reduce power bills drastically.

A wide range of Autoclave are manufactured, exported imported and supplied by Carewell Instruments. It is widely used in microbiologic methods to sterilize the equipment. Our autoclaves are easy to operate, safe and reliable. Moreover, a high quality stainless steel is used in the manufacturing of our Autoclaves. Our range : Tabletop AutoclaveHand Round Automatic AutoclaveHorizontal Cylindrical AutoclaveHorizontal Cylindrical AutoclaveLaboratory Autoclave (vertical and portable)Digital Display Autoclave

• Application: Laboratory
• Material: Stainless Steel
• Brand Name: Genist
• Approval Certificate: GMP, CE, ISO, IEC Certificate
• Model No.: GTA-003A
• Shape: Horizontal
• Capacity: 78 Liter to 430 Liters
• Temperature: 121 Deg. To 134 Deg.
• Insulation Wall: Triple wall
• Available Sizes: 400 X 600 MM to 500 X 1200 MM (Customized sizes are available)

• Country of Origin: India
• Type: Horizontal Cylindrical Autoclave
• Certification: ISO 9001:2008
• Application: Hospital,Laboratory,Pharma Industry
• Voltage: 220V
• Condition: New
• Automatic Grade: Fully Automatic
• Driven Type: Mechanical
• Warranty: 2years

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Application: Hospital, Laboratory, Pharma Industry
• Weight: 200-300kg
• Voltage: 220V, 440V
• Condition: New
• Power: 1-3kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year
• Shape: Horizontal

Located in Tamil Nadu, India, we are actively functioning as a Manufacturer and Supplier of Horizontal Cylindrical Autoclave all over the nation. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for their development. Feel completely free to place the order!   Horizontal Cylindrical Autoclave with ISI (BIS 3829) Part I Marking Inner Chamber : SS 316 Steam Jacket : SS 304 Working pressure : 1.2kg/cm2 & 2.1kg/cm2 Working Temperature : 121°C / 134°C Door : Single door with Radial locking system Mode of control : With a multiport valve / Automatic Optional Pre-vacuum and post vacuum : To eliminate air packs and ensure effective sterilization. Water protection : In the event of low water the supply to the heaters is  discontinued automatically and visually indicated in the control panel. Pressure switch : An automatic pressure switch adjustable type is provided to  set the required pressure. Vacuum drying : An  effective  vacuum drying is caused with powerful ejector and vacuum breaker which draws  air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying. Water Gauge glass : To note down the level of water glass tube with gauge is provided. Gasket : Silicon Expansion type Instrumentation Safety Valve Vacuum Breaker Non Return Valve Steam Trap Water inlet and Water outlet Valves Supply Voltage : 440 volts – 3 phase  Sequence of Automatic operation includes the following : Automatic water filling for the steam generator Leak test for required time and results with alarm will displayed and data logged. Bowie-dik test Spore-test results from approved lab  submitted Pulsing (vacuuming, purging and pre-heating)_ Optional Sterilization with temp and balance time displayed and data logged Exhaustion appropriate to liquid, instruments and fabric cycles. Drying cycle with vacuum pump. – Optional  Final cooling with admission of filtered  air (0.2 Micron) Sterilization completes with F.O values Displayed and data’s logged Optional : High Vacuum with vacuum pump Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle Data Logging System Double Door System Pulsing Controller

• Material: Stainless Steel
• Shape: Horizontal
• Color: Shiny Silver
• Voltage: 110V
• Pressure: Low Pressure
• Surface Finishing: Power Coated

• Shape: Horizontal
• Material: Stainless Steel
• Features: Adjustable pressure , Sturdy construction , Innovative Design .
• Automation Grade: Manual
• Installation: No

• Country of Origin: India
• Application: Laboratory
• Weight: 100-200kg
• Color: Silver
• Condition: New
• Power: 9-12kw
• Driven Type: Electric

This is a double walled unit mounted horizontal on a sturdy, heavy mild steel tubular stand duly painted. Pressure is adjustable from 10 to 20 psi. fitted with pressure gauge, safety valve and steam release valve. Available with boiler. For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided. Hydraulically tested upto 40 psi. Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation. Both inner chamber made of S.S. Fitted with a Digital Temperature Indicator to indicate temperature. Automatic Pressure Control Switch and Automatic Low Water Level Cut-off devices. Lid is made of S.S. Plate provided with radial locking system. Without steam jacket.

• Country of Origin: India
• Type: Horizontal Cylindrical Autoclave
• Certification: CE Certified, Iso 9001: 2015
• Application: Hospital
• Weight: 300-400kg
• Color: Silver
• Voltage: 440V
• Condition: New
• Automatic Grade: Automatic
• Power: 6-9kw
• Driven Type: Electric
• Warranty: 1year

• Application: Hospital, Pharma Industry
• Power: AC Supply.
• Warranty: 2years
• Equipped with: Pressure Control Device, Digital Temperature Controller with digital Timer & Alarm Low Water Cut off Device.
• Sterilizing Temp.: 121ºC to 131ºC
• Sterilizing Pressure: 1.2 to 1.5 Kg/cm2 (15psi - 20psi)

The sterilizer is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. All models work on principle of downward displacement of air which is most economical method of obtaining sterilization.   Construction : Triple Walled with Steam jacket. Inner Chamber and Steam Jacket made of S.S. 304 with leak proof argon welding. Lid Made of S.S. Autoclave mounted on tubular steel frame with ground leveling screwed flags.

We make available Horizontal Cylindrical Autoclave which is acclaimed for its high performance and long lasting service life. Courtesy a state-of-the-art warehousing unit and an ultramodern inventory control system, we take care of product storage related work with ease. Our warehouse and system empowers us to maintain year round products' availability. Operating from Ghaziabad(India), we are instrumental in offering the wide array of products to the customers.

• Brand: Genist Technocracy
• Material: Stainless Steel
• Model No.: GTA-003A+
• Shape: Horizontal
• Capacity: 78 Liter to 430 Liters
• Temperature: 121 Deg. To 134 Deg.
• Insulation Wall: Triple wall
• Available Sizes: 400 X 600 MM to 500 X 1200 MM (Customized sizes are available)

Triple walled unit horizontally mounted on a sturdy, heavy Stainless Steel 304/316. Both inner chamber and outer wall made of Stainless Steel. Fitted with Dial thermometer to indicate the inner chamber temperature. Chamber and releasing the steam in atmosphere after use are provided. Lid is made of S.S plate provided with radial locking system.   Gasket Fitted with silicon rubber gasket.   Door Sterilizers have single or double door made out or rolled steel lined with stainless steel sheet on both sides.   Component Vacuum Pump & Water Feeding Pump. Fitted with Automatic Pressure Control Switch   Insulation 75MM gap between the wall is filled with special grade glass wool for proper insulation and to avoid heat losses. Temperature & Power Supply As per the international standards and guidelines our triple walled Horizontal autoclave have a working temperature of 121 C, however for specific requirements our autoclaves can be upgraded to be used for up to 134 C.   Pressure is adjustable from 15-20 psi. To work on 440 Volts 3 Phase A.C. Supply. Pressure gauge, safety valve and steam release valve. Pressure gauge, safety valve, and steam release valve.   Steam Generator Available with separate boiler   Automation with Printing Facility Fully Automatic with PLC controller. Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation/Vacuum pump. Automatic Low Water Level Cut-off Device fitted for general safety of the element. Printing facility.   Quality & Standards We are an ISO 9001:2008/WHO-GMP,CE, ISO,CE, ISO 13485:2003 Certified Company with Strict quality control measures conforming to National and International Standards.

We are a major Manufacturer and Supplier of Horizontal Cylindrical Autoclave in Haryana, India. We manufacture it under the guidance of our dexterous professionals, who are well-versed with the predefined industrial standards and norms. We use the premium grade materials and updated techniques for manufacturing it. We are well-capacitated to deliver it in bulk quantities, within the promised time frame. We offer it at a highly nominal rate.Salient Features of Our Triple Horizontal Autoclave (Dry) Steam Stock Provision Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Construction : Our horizontal cylindrical autoclave are triple walled units. Outer body of our autoclave is constructed out of thick gauge stainless steel sheet of SS-304 grade. The inner chamber is also made of heavy gauge stainless steel sheet of SS-304 grade. The middle wall is also constructed from the strong and sturdy stainless steel sheet of ss-304 grade s stainless steel sheet. These are steam stocking models connected with a three way valve to control the sterilization cycle inside the autoclave. Our autoclaves are insulated by generous mineral glass ass wool insulation. The strong lid constructed out of thick stainless steel plate has a double safety radial locking arrangement, which ensures an easy and smooth opening and closing operation for all our autoclaves.Heating : The heating process in our triple walled Horizontal autoclave is done through specially designed water heaters of suitable wattage to ensure optimum sterilization time in every sterilization cycle.Working Temprature : As per the international standards and guidelines our triple walled Horizontal autoclave have a working temperature of 121oc. ,however for specific requirements our autoclaves can be upgraded to be used for up to 134°c.Pressure Range : The normal pressure range of our autoclave is 5 psi to 20 psiLoad : 18KWPressure Control : The pressure inside our Horizontal autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressureexceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Technical Features of Deluxe Horizontal Autoclave Hi-tech radial lock locking mechanism for ultimate ease of operation and safety. Steam Release valve of Stainless Steel ensuring a long life of the equipment. Huger grade spring loaded safety valve of brass, duly chrome plated. Water Indication Gauge with stainless steel enclosure. High accuracy and reliable pressure gauge. Multiple operating valve for the control of the sterilization cycle. Accidental Vacuum Break Device: Ensuring vacuum break due to power failure or any other usage. Water Level Cut Off Device Cut Hammer contractor for long trouble free usage. Specially designed ISI marked stainless steel heaters. Plug screen to prevent line choking due to sediment discharge. Highly accurate temperature and pressure gauges for boiler chamber and jacket.

It is a triple walled autoclave mounted on a horizontal stainless tell stand which offers a look of horizontal cylindrical shaped Autoclave. The triple walled stainless steel coating provides effective support to the equipment against any external damage and prevent any heat exchange between the equipment and the environment.

• Brand Name: GTA-003

the horizontal cylindrical autoclave that we provide features double or triple walled unit that is horizontally mounted on a sturdy and heavy stainless steel. Both inner chamber and outer wall of this horizontal cylindrical autoclave is made of stainless steel. The horizontal cylindrical autoclave is provided with an option of automatic vacuum breaker that breaks the vacuum in case of formation of vacuum due to steam condensation. We make available the horizontal cylindrical autoclave at very reasonable prices. applications double triple walled unit horizontally mounted on a sturdy, heavy stainless steel both inner chamber and outer wall made of stainless steel pressure is adjustable from 5-20psi fitted with pressure gauge, safety valve and steam release valve available with separate boiler for units fitted with s.s. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided fitted with automatic pressure control switch fitted with dial thermometer to indicate the inner chamber temperature lid is made of s.s. Plate provided with radial locking system industrial grade energy efficient heaters reduce power bills drastically as per the international standards and guidelines our triple walled horizontal autoclave have a working temperature of 121oc., however for specific requirements our autoclaves can be upgraded to be used for up to 134oc options automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation automatic low water level cut-off device fitted for general safety of the element plc controller instead of digital controller 20% charges extra for double door in all sizes double door .

• Country of Origin: India
• Type: Horizontal cylindrical
• Certification: ISO 9001:2008
• Application: Hospital, Laboratory, Pharma Industry
• Weight: According to size
• Color: Complete stainless steel
• Voltage: 220V, 440V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual
• Power: According to size
• Driven Type: Electric
• Warranty: 1year
• Brand Name: TSI
• Capacity: According to size

We are counted as the most prominent laboratory autoclave manufacturer incepted in India. Bio-Gene's horizontal autoclave has inner chamber, boiler, lid and jacket - all made of 304 grade stainless steel for controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. Our cylindrical autoclave is available completely with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in all the standard sizes and can be operated on 3 phases, 440 volts a.c. supply. We also provide cylindrical autoclave in single phase optional and micro-processor/pid/digital control with polygraph is also available on the demand of clients.

• Capacity: 22 ltrs, 40 ltrs, 50 ltrs

Horizontal Double Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms, An ideal tool for Laboratories, hospitals, nursing homes, R & D labs, Double walled unit horizontally mounted on a sturdy, heavy M.S. duly painted or stainless steel tubular stand, Both inner chamber and outer wall made of S.S, Fitted with pressure gauge, safety valve and steam release valve, Available with separate boile, For units fitted with S.S. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided, Automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation.