Hot Gas Generator Dealers (65 products available)

We deal in the highly efficient oil & gas fired hot water generator that is high on demand in the international market. It is available in vertical and horizontal types. These generators have single stage, two stage and step less modulating burner control. Fuel efficient High efficiency Single start button Noiseless operation

  We deal in the highly efficient Oil & Gas fired Hot Water Generator that is high on demand in the international market. It is available in vertical and horizontal types. These generators have single stage, two stage and step less modulating burner control.   Advantages of our Oil & Gas fired Hot Water Generator :-   Fuel efficient High efficiency Single start button Noiseless Operation Smokeless combustion No explosion hazards   Specifications of Oil & Gas fired Hot Water Generator :- Available in 15,000 kcal/Hr. to 5,000,000 kcal/Hr Temperature Range 90°C at atmospheric pressure / 140 & 180°C Pressurized.   Profile :-   AQUATHERM - SF is a Solid Fuel Fired Hot Water Generator.It is available in Vertical & Horizontal Smoke Tube Type   Range-10,000 kcal/Hr. to 400,000kcal/Hr.Temperature Range 90°C at atmospheric pressure.140 & 180°C Pressurized type.   Design Features :- • Most Economical in operating cost No water treatment required when used with Calorifier.

Airotherm is a combination of shell-in-shell and tube-in-shell type hot air generator. It has four concentric shells. The furnace shell has a blind end where the flue gases are reversed over the flame itself forming the 1st and 2nd pass. The 3rd pass is situated between the 2nd &3rd shell from where the flue gases, led via a duct, to the tube-in-shell type heat exchanger. The 4th & 5th pass are through tubes of the tube-in-shell heat exchanger. The burner assembly is bolted on a removable inner cover plate. The combustion air is led to an air register which is formed by the annular space of the inner cover and the outer cover. The air going for combustion is thus preheated. The fresh air has four passes to absorb heat from the flue gases. The 1st pass of the cold air enters around the 5th pass of the flue gases. Likewise all the subsequent passes of the air and flue are in counter current mode enabling maximum heat transfer. The final 4th pass of the fresh air which is at the last leg of the heat transfer path wraps around the furnace in circular path absorbing the heat attaining the required temperature for the process. The max temp for this model of heater is 300 The design of the heater is made simple and operator friendly.

Certification : CE Certified

Condition : New

Automatic Grade : Semi Automatic

Pressure : High Pressure

Warranty : 1year

Feature : Easy To Operate

Reduce your diesel costs by as much as 20% - mixing a shot of LPG with the air through the turbo to improve the burn efficiency of the diesel in the combustion chamber. The everyday diesel combustion burns approximately 75% of the diesel in the chamber; by adding a shot of LPG into this chamber it increases this efficiency to 95%. We provide the clients a more efficient combustion process that is using less diesel fuel, which resultantly saves you money. We offer LPG Gas Heating System ensures better combustion in the Chamber that will increase the horsepower and torque. With this improvement in the combustion of the LPG Gas Heating System, which we make available, there is not the excess diesel dropping into the sump and contaminating the oil - resulting in less oil changes. Improved combustion also means less greenhouse gas emissions, i.e. Less Co2, Less nitrogen oxide and reduced carbon emissions. We are counted among the reliable Suppliers of the LPG Gas Heating System from Pinjore. How Does It Work? The LPG injection System is boost pressure activated. It is controlled, activated and proportionate to the boost pressure of the engine. The LPG comes on slow and steady and as the boost increases, so does the flow of gas. It is only activated when the vehicle ignition is on and the engine is running. The System is installed under the bonnet and requires no permanent modifications to the vehicle or engine. Fittings In Our LPG Gas Heating System : Billet aluminum high pressure converter Heat exchanger with inline filter

We are rated amongst the credible Manufacturers & Suppliers of Direct Gas Fired Hot Air Generator from Maharashtra, India. The Hot Air Generator has garnered appreciation from various industries because of its reliable functioning and durable nature. We can be counted upon for delivering small or bulk orders of Direct Gas Fired Hot Air Generator within the postulated time. Direct Gas Fired Hot Air Generator : Capacities upto 5 million kcal/hr Fuel : Light Oil / Heavy Oil / Natural Gas / LPG / Bio Gas / Coke Oven Gas/ Pyrolysis Gas & allied SOT Direct Fired Hot Air Generators are tailor-made to suit individual requirements. The units are self-contained, ready to install immediately after power supply is given. The combustion takes place in refractory lined furnace. The combustion chamber is suitably designed to complete the combustion within itself. The combustion chamber is enclosed in a concentric shell with suitable lining. The fresh air from dynamically and statically balanced blower is fed to the chamber tangentially. The air envelopes the combustion chamber and absorbs the radiant heat from its surface and then mixes with completed combustion gases in a conical chamber. Hot air, thus generated is let out from Hot Air generator at controlled temperature to the process. These Hot Air generators are manufactured upto capacity of 5.0 million Kcal/hr. higher capacities are also available. Efficiency in these hot air generators is nearly 100% since surface losses are taken care of with proper insulation. Specially designed systems can be offered suitable for temperatures upto 700 degree C.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Hot air generator to Convey the Material.A fully automatic multi pass counter current Hot Air Generator consist of stainless steel shell type integral combustion chamber accommodated in multi M.S. shell. The cold air is inserted by a suitable capacity blower fan in first pass, absorbs heat from flue gas passage and accordingly both hot flue gas and cold air travel in opposite direction in the passage which ultimately transfers 90% heat to cold air and delivers hot air from hot air outlet hole. The system functions fully automatic on temperature sensing device installed at hot air outlet which ON-OFF the burner at pre-set temperature. the system is a package type unit, fixed on common base frame.

High Efficiency : Low Fuel Consumption

Pressurized : Non Pressurized

We are offering gas fired hot water generator, oil fired hot water generator etc. hot water generator oilgas fired fully automatic coil type pressurized & non pressurized design. capacity - 50,000 kcal & up to 10 lac kcal.hr.

Efficiency : 74 ± 2% on NCV

Temperature : Up to 320° C

Gas fired hot air generator Capacity: 1 Lkcal to 100 Lkcal Thermic Fluid Heater with Heat Exchanger.Fuel: Agro waste Wood Briquette Coal, Temperature:Temperature: Up to 320° C.

Gas Fried Hot Water Generators model "DHG" are offered in various sizes. These units are extremely eficient, because of three pass design. This generator is a safer and economical system which delivers hot water much faster than any other system. It's most ideal usage includes hotels, hospitals, residential complex, laundry, dairy industries, etc., where continuous hot water supply is essentially required. Features: · Enhanced Engineering Design With Optimum Technology.· Optimum Heat Transfer Hence High Efficiency Of 90 %.· Elegant Control Panel With High End Safety Features.· Quality Assured Manufacturing.· Anti Drip Imported Burner Hence High Combustion Rate.· Precision Wound Coil.· Continuous Supply Of Hot Water Upto 90°c, Round The Clock.· Enhanced Safety With Burner Cut-off For Flame Failure, High Water Temperature, High Stack Temperature & No Water Conditions.

Capacity : As Requirement

Fuel Type : Oil & Gas Fired

Material : Galvanized Iron

Brand Name : Heat Care System

Condition : New

Usage/Application : Any Industry

Country of Origin : Made in India

Working Pressure : Adjustable As Requirement

Machine Type : Automatic

Temperature Range : Adjustable as Requirement

Efficiency : 95%

Capacity Range : 50,000 Kcal/hr to 6,00,000 Kcal/hr

We are counted amongst the most reliable manufacturers, exporters and suppliers of an extensive range of Gas Fired Hot Air Generators. These are available in vertical and horizontal types. These generators are made available in direct and indirect heating options. Direct heating systems are widely used for high temperature drying, whereas the indirect systems are used where pure air is required for drying.

 » Circulating Pump Motor Interlocked.  » Pressure Switch on Pressure Tank.  » Low Fuel Oil Temperature (F.O. Fired Only).  » Two Nos.Pressure Switch for On/Off Flow.  » High Stack Temperature.  » High Hot Water Temperature.  » Flame Monotoring by Photocell (LDR).  » Spring Loaded Safty Valve.     Key Attributes:    » Coil for Seamless ASTMA 106 GR-B Pipes.  » Independent Drive for Fuel Pump 1440 RPM.  » No Scale Formation.  » Easy and Economical Operation.  » Outside Preview of IBR.     Applications:    » Sugar Plant  » Textile Industries  » Thermal & Hydro Power Plant  » Mines/Mining Industries  » Coal Preparation Plants  » Chemicals Plants  » Pharmaceuticals  » Refinery  » Breweries and Distilleries  » Railways  » Shipping  » Tyre Industries  » Plastics  » Rolling Mill  » Metallurgy  » Agriculture  » Petroleum & Petrochemicals  » Laboratories  » Dairy Products  » Foundry  » Ceramic Industries  » Road Equipments and many more     Detail Required For Quotation:    » Capacity in Kcal/Hr.  » Temperature in Deg. C.  » Type Of Fuel in Light Diesel Oil / Furnace Oil / L.P.G. / Natural Gas

RG - Oil & Gas Fired Hot Air Generators The RG series hot air generators are offered in vertical or horizontal designs, either as standard models or tailor-made models to match customer's specifications and applications. Designed in Direct and Indirect heating types, these systems are practically free from any maintenance and are highly efficient. Direct systems find their applications in high temperature drying, whereas the indirect systems are used where pure air is required for drying. The design is compact & hence space saving. Units are designed for continuous round the clock operation. Salient features of the RG series hot air generators are Durable construction Easy operation and minimal maintenance High level of safety in operation, thus greater realiability Optional recirculation system to improve overall thermal efficiency Fully automatic burner control and temperature control Units are available from capacities of 20,000 Kcal/hr to 30,00,000 Kcals/hr. Imported & indigeneous burners can be supplied with various firing options like light oil, heavy oil & gas. Units can be manufactured in various materials of construction like SS. Units can be supplied with optional imported burners or ROSS burners.

We deal in the highly efficient Oil and Gas fired Hot Water Generator that is high on demand in the international market. It is available in vertical and horizontal types. Oil and Gas fired Hot Water Generators have single stage, two stage and step less modulating burner control.   Advantages of our Oil and Gas fired Hot Water Generator :-   Fuel efficient High efficiency Single start button Noiseless Operation Smokeless combustion No explosion hazards   Specifications of Oil and Gas fired Hot Water Generator :- Available in 15,000 kcal/Hr. to 5,000,000 kcal/Hr Temperature Range 90°C at atmospheric pressure / 140 & 180°C Pressurized.   Profile :-   AQUATHERM - SF is a Solid Fuel Fired Hot Water Generator.It is available in Vertical & Horizontal Smoke Tube Type   Range-10,000 kcal/Hr. to 400,000kcal/Hr.Temperature Range 90°C at atmospheric pressure.140 & 180°C Pressurized type.   Design Features :- • Most Economical in operating cost No water treatment required when used with Calorifier.

Oil or Gas Fired Horizontal Hot Water Generator t can be supplied with the rugged Ross make burner or any other imported burner. The reverse flue design achieves higher efficiency & saves precious fuel. Each Astra undergoes a complete firing test, including a thorough check up of all electrical components & adjustment of burner for efficient combustion.

Heat output : 1,00,000 Kcal

Maximum hot air temprature : 250ºC

Efficiency on gcv : 85%

A fully automatic multi pass counter current Hot Air Generator consist of stainless steel shell type integral combustion chamber accommodated in multi M.S. shell. The cold air is inserted by a suitable capacity blower fan in first pass, absorbs heat from flue gas passage and accordingly both hot flue gas and cold air travel in opposite direction in the passage which ultimately transfers 90% heat to cold air and delivers hot air from hot air outlet hole. The system functions fully automatic on temperature sensing device installed at hot air outlet which ON-OFF the burner at pre-set temperature. the system is a package type unit, fixed on common base frame.

Capacity : 10,000 Kcal/hr

Usage/Application : Industrial

Style : Horizontal

Country of Origin : Made in India

Body Material : MS

Features : Used in combustion of fuels in boilers, High heating capacity, Resilient design.

Condition : New

Tank Orientation : Horizontal

Feature : Best perfomance

Capacity Range : 600 Kg/hr – 10 Ton/hr

These Steam Boilers are available as Once through type, Shell type, Smoke Tube Water Tube Boilers. We offer Super Efficient Steam Boilers both IBR asIBR Boiler well SIB with numerous advantages in the Industrial world. three pass double helical design : allows preheated feed water to flow downwards through the finned economiser banks & passes to the radiant steaming zone. large furnace with low position : enables low heat release rate, rapid water circulation. submerged combustion chamber : results in excellent internal water circulation. separate tube sheet : eliminates stresses, prevents ligament cracks.

Thermair, hot air generators consist of a shell and tube type heat exchanger which is duly insulated to prevent radiation losses. The ventilation blower fitted alongside blows fresh air over the combustion chamber and the set of smoke tubes. In oil gas fired options, an imported mono-block type fully automatic burner is provided for combustion of fuel. Thermair can also be offered in solid fuel firing options. A dust-proof, pre-wired control panel is also supplied as a standard supply to control the operation of the unit based on customer requirements.

Brand Name : Elite

Fuels : Gas

Color : Beige

Material : Boiler Quality Steel

Efficiency : 90%

Country of Origin : Made in India

Capacity : 50000 - 2500000 kcal/hr

Heater Type : Fired Heater

Max. Hot Water Supply Temperature : 140 deg. C

Orientation : Vertical / Horizontal

Banking on our decade of experience in the domain, we are manufacturing and supplying an exclusive array of Gas Fired Hot Air Generator. These generators are made by a team of skilled professionals using optimum grade of materials, following the norms and guidelines laid down by the industry. Broadly find their application in chemical, dyestuff, painting and textiles industries, our Gas Fired Hot Air Generator is appreciated for its negligible maintenance, stable operation and rugged construction. Be it domestic market or international, our offered air generators are appreciated and acknowledged over the global platform.  

Fully automatic. 2) Easy operation & fail proof system. 3) Packaged models. 4) Compact in design. 5) Caters to hot air requirements of any drier. 6) Record efficiency. 7) Economically cheapest clean hot air available instantly. 8) Low motive power required. 9) Replaces electricity, Steam, thermic fluid , media to generate hot air. 10) Drying Time & drying cost considerably reduced. NEOTECH's oil fired hot air generator model technology blocks comprise of an advanced shell in shell type radiant heat transfer section connected to a multiple pass shell & tube type convective hea exchanger.

SAKA has a full range of Hot Air Generators or Air Heaters. Our Hot Air Generators (HAG) comes with robust and sturdy design to provide you required heat consistently and in safe manner. Known for its compact design and fail proof arrangement SAKA make HAG are ideal for wide range of industries right from Chemical to fertilizer to Food. SAKA’s fully automatic HAG are extremely easy to operate with just push of button and does not require specially trained resource. Known for its economical efficiency our HAG can provide clean and safe hot air making it ideal choice for food and pharmaceutical industry.

Brand Name : Manfredini

Type : Vertical

Condition : Used

After-sales Service Provided : No overseas service provided

Voltage : 220 Na

Capacity : 1000000 Kcal/hr

Country of Origin : Made in India

Brand : URJEX

Automation Grade : Automatic