Incubator Shaker Dealers

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator) Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions. Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint. The lid is made of stainless steel. The gap between the two chambers filled with glass wool to prevent loss of heat. The temperature is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.

Water Bath Incubator Shaker : Alpha Chem is manufactures,exporter & suppliers Water Bath Incubator Shaker. Water Bath Incubator Shaker :(Metabolic Shaking Incubator) Temp. Range from ambient to 90°C. This is double walled unit inside made of thick S.S. Sheet and outside M.S. Power Coated, supplied complete with shaking tray water bath to work on 220 volt 50Hz A.C. Supply. Shaking Tray Size (Stainless Steel) Capacity 275x275x150mm 12 ltrs. 405x300x150mm 18 ltrs. Optional:- • Digital Temp. Indicator. • Digital temp. Indicator- Cum- Controller. • Microprocessor PID digital temp. Indicator-Cum- Controller. • Shaking tray for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or conical flaks.

We have been manufacturing Water Bath Incubator Shaker for a long time using cutting edge technology. We are supplying and exporting Water Bath Incubator Shaker to the various hospitals, dispensaries, nursing homes, research centers, etc. On regular basis. Thus, we are reckoned as one of the noted manufacturers of Water Bath Incubator Shaker in the country. Attributes Double walled constructionInner made of thick S.S. SheetOuter made of M.S. Sheet duly enamel paintedS.S. Made paramedical lid prevents falling of condensed water droplets on the specimensAvailable with immersion type heaterEGO/JUMO GERMAN hydraulic type thermostat with an accuracy of + 0.5o fpr controlling temperatureOscillating tray riding on the brass rollersShaking speed range is between 40 to 140 cycles per minuteShaking tray for holding test tubes or Erlenmeyer flasks of 25mlk or 50ml or 100ml or250ml or 500ml or 1000mlAvailable with L shaped thermometer cord and plug, to work on 220/230 volts A.C. SupplyHeating arrangement ranging from ambient to 100°CHeating and cooling arrangement available with temperature range from 5o to 100oC Inside Size Temp Ambient To 100oC Temp 5oC To 100oC 275 x 275 x 75mm275 x 275 x 150mm405 x 300 x 150mm.

LABTOP orbital shakers incorporate design features that offer maintenance-free shaking under a constant and reproducible temperature environment. Two different models that can meet the needs of most biological research laboratories for shaking under a precisely controlled temperature environment are available in four basic housing configurations: Foamed - in – place CFC Free PUF insulation ensures temperature stability and reduced energy consumption.

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)   Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions.   Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint.  The lid is made of stainless steel.  The gap between the two chambers filled with glass wool to prevent loss of heat.   The temperature is achieved by superior immersion heater and is  controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.    Shaking speed is controlled from tray working on rollers.  Shaking speed is controlled from 40 to 140 cycles per       minute.  Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity.   Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc.   L-shaped thermometer is provided to  indicate inside temperature.  Equipment to work on 220V AC 50Hz single phase.   Shaking Tray Size (Stainless Steel)       Capacity   a. 275x275x150mm                                    12ltrs. b. 405x300x150mm                                    18ltrs.    Optional :-   i)             Digital Temp. Indicator. ii)            Digital temp. Indicator- Cum- Controller. iii)            Microprocessor PID digital temp. Indicator – Cum- Controller. iv)           Shaking tray  for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or Conical               flaks. 

• Country of Origin: India
• Type: Rotary Incubator Shaker
• Material: Stainless Steel
• Application: Laboratory
• Color: Grey, White
• Voltage: 110V, 220V
• Condition: New
• Frequency: 50-60 Hz
• Power Source: Electric
• Automation Type: Automatic, Manual, Semi Automatic
• Type: Shaking & Incubation Combined
• Brand: GAIED
• Warranty: One Year Standard Warranty

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)   Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions.   Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint.  The lid is made of stainless steel.  The gap between the two chambers filled with glass wool to prevent loss of heat.   The temperature is achieved by superior immersion heater and is  controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.    Shaking speed is controlled from tray working on rollers.  Shaking speed is controlled from 40 to 140 cycles per       minute.  Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity.   Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc.   L-shaped thermometer is provided to  indicate inside temperature.  Equipment to work on 220V AC 50Hz single phase.   Shaking Tray Size (Stainless Steel)       Capacity   a. 275x275x150mm                                    12ltrs. b. 405x300x150mm                                    18ltrs.    Optional :-   i)             Digital Temp. Indicator. ii)            Digital temp. Indicator- Cum- Controller. iii)            Microprocessor PID digital temp. Indicator – Cum- Controller. iv)           Shaking tray  for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or Conical               flaks.   

• Type: Incubator Shaker
• Material: Cast Iron, Iron, Stainless Steel
• Application: Laboratory
• Color: Blue, Grey, White
• Voltage: 220V
• Condition: New
• Frequency: 50-60 Hz
• Power Source: Electric
• Automation Type: Automatic, Manual, Semi Automatic

We are the main supplier of this product.

We offer Water Bath Incubator Shaker that is useful for studies on tissue metabolism, enzymes, protein coagulation and other experiments; demanding shaking at constant speed under controlled temperature conditions. We offer Water Bath Incubator Shaker, which has double walled construction; inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steel duly finished in stoving enamel paint. The lid is made of stainless steel. The gap in our Water Bath Incubator Shaker, between the two chambers is filled with glass wool to prevent loss of heat. Details : The temperature in the Water Bath Incubator Shaker is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90oC+ 0.5oC. The shaking mechanism in Water Bath Incubator Shaker is fitted with variable speed motor couple to shaking tray working on rollers. Shaking speed is controlled from tray working on rollers. Shaking speed is controlled from 40 to 140 cycles per minute. Shaking tray can hold either test tubes or flasks of 25ml. or 100ml. capacity. Front panel includes on-off switch, shaking mechanism indicator, speed control, thermostat control etc. L-shaped thermometer is provided to indicate inside temperature. Equipment to work on 220V AC 50Hz single phase. Optional : Microprocessor Thermostat �EGO�/�JUMO� german with the accuracy of 0.5oC Digital Temperature Indicator Digital Temperature Indicator- Cum- Controller Microprocessor PID Digital Temperature Indicator � Cum- Controller Shaking tray for 25ml, 50 ml, 100ml. 250ml & 500 ml & 25mm dia. Test tubes or conical flaks Minimum Order Quantity : 25 Pieces

An Incubator Shaker performs orbital shaking below temperature controlled conditions. Cell culture, biological science, medicine etc. square measure square measureas wherever these units are extensively utilized. we have a tendency to manufacture and provide brooder shakers in kind of configurations; cold or heated, benchtop or floor mounted and double layer etc. These shaking brooder units square measure totally made-to-order and conjointly on the market with big selection of accessories and choices to accommodate specific application parameters. To a lot of regarding our brooder shaker value and alternative necessary details, please mail North American country your question, our executives can assist you with everything you wish. Features Versatile usage Ergonomic Design Energy Efficient CFC free cooling Long life Low Maintenance Calibration And Protocol Documentation Shaking Platform: The standard model of our orbital shaker has a plat form size of 500mm x 500mm and it can withhold 16-20 flasks of 250ml or 500 ml. However this can be modified to suit the individual customer’s requirements. Shaking System: The economical and diligent shaking system of our setup shaker features a orbital shaking movement that is hopped-up by a reliable crompton greaves motor of appropriate power and power.

A constant temperature as well as uniform shaking bath for a wide varieties of applications not involving memo metric measurement such as incubation of Tissue slides and homogenates, protein coagulation, aerobic and anaerobic studies of Tissue Slices and homogenates it atmosphere of various gases or mixture of gases. The bath is double walled inside made of Stainless Steel and outside Mild Steel Sheet and painted in Epoxy Powder Coating. The bath has an oscillating tray riding on ball rollers and oscillated by a Governor controlled variable speed motor, shaking speed range is 40 to 140 cycles per minute. The temperature is controlled by Hydraulic type Thermostat from few ºC above ambient to 70 º C with maximum temperature 100 º C. sensitivity plus minus 0.5º C. A "L" shape thermometer mounted on front panel is calibrated from 0º C to 110º C. in one degree division. Unitized controlled panel has individual switches for heater's knob reference dial for repeat thermostat setting, control of shaking speed and two pilot lights which indicate heater cycle as well as mains, with 1000 watts immersion element. The bath is complete with one shaking tray, one large gabble cover made of Stainless Steel for overall bath, connecting cord plug for operation on 220/230 volts but without racks and glassware.    

• incubator shaker: 50000

Manufacturer of rotary incubator shaker, rotary shaker, fermenter, bioreactor, incubator shaker, biofertilizer plant, autoclace, pilot scale fermenter, laboratory fermenter, industrial autoclave.

Details : Ideal for reliable steaming/ evaporation. Fitted with a water level indicating device and a removable flat drop on lid for concentric rings that enables the bath to be used for other work also. Control accuracy of ± 1°C in Digital Mode. Full Stainless Steel Construction with energy efficient long  life heaters. 6 holes of 75 mm Φ with steps of 25 mm 12 holes of 75 mm Φ with steps of 25 mm 24 holes of 75 mm Φ with steps of 25 mm

• MAHENDRA: Orbital Incubator shaker
• Digital control: Temperature range from 5degC to 70degC
• Iinner chamber stainless steel: SS lotus clamp

Most suitable for Bio-technology test, stability test etc.Stainless steel inner chamber with S.S. Shaking platform.Stainless steel clamps to hold flasks capacity of 50ml, 100ml, 250ml, 500ml, 1lit. etc.Choice to hold Nos. of Flasks as per customer's requirement.Temperature range from ambient to 60ºC.Model with Cooling system are also available with temperatrue range of 5ºC to 60ºC.Digital temperature controller. Digital speed indicator with variable speed controller is also available.

• Material: Stainless Steel
• Application: Laboratory
• Color: Grey
• Voltage: 110V
• Frequency: 50-60 Hz
• Power Source: Electric
• Automation Type: Semi Automatic

Optional : Digital temp. Indicator-cum-controller Microprocessor PID digital temp. Indicator-cum-controller with timer Digital temp. Indicator shaking tray for 25ml, 50ml, 250ml, 500ml, 500ml & 25mm dia.test tubes or conical flasks.

This is a desktop model designed for studies on tissue metabolism, enzymes and protein coagulation or other experiments requiring shaking of subject matter at constant speed under controlled temperature environment.The basic construction is double walled with 100% leak proof inner chamber of thick polished Stainless Steel sheet & has smooth inside working surface. The Outer body is made of mild steel duly powder coated. The lid made of thick polished Stainless Steel sheet prevent failing of condensed water droplets on the specimens. The space between the two walls is packed tightly with high grade glass wool to prevent loss of heat and ensure constant temperature. Heating is achieved by a high quality immersion type heater and temperature is controlled by capillary hydraulic type thermostat from ambient to 100°C ± 0.5° C. The shaking mechanism comprises of variable speed motor fixed on the left side and coupled to the shaking tray which shakes linearly to and fro on ball rollers moving in guides which are greased for smooth motion. The shaking speed can be controlled between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or flasks of 25 ml or 50 ml or 100 ml capacity as ordered by the users. Front panel includes switches to ON/OFF mains, rpm regulator and Indicators. It also includes thermostat control knob, Speed control knob, and L-shaped thermometer to indicate the inside temperature.The incubator is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available). W    X   H    X   D 275 × 275 × 75 mm        275 × 275 × 150 mm  400 × 300 × 150 mm   

Double Walled Outer Construction Of Mild Steel Epoxy Coated Paint, Inner Chamber Of Highly Polished Stainless Steel Sheet, Inner Chamber Has Door Operated Illumination, Forced Air Circulation Is Equipped With Best Quality Motor Blower With Air Ducting System For Positive Air Flow For Constant Room Temperature In The Chamber. Puff Insulation Is Given Between The Inner And Outer Walls To Prevent Thermal Loss. Equipment Is Fitted With Hermetically Sealed Compressor With Relay Guard, Heat Exchanger, Filled With Eco-Friendly CFC Free Refrigerant. Transparent Window At Door. Main Door Is Double Walled Puff Insulated Inner Stainless Steel And Fitted With Heavy Sturdy Hinge And Magnetic Gasket, Lock & Key. Automatic Temperature Control By Digital Temperature Controller Cum Indicator With Pt.100 Sensor. Temperature Range Is 10°C To 50°C +- 1°C, Shaker Capacity 12x1000ml Conical Flask.

• Size: 450mm*450mm
• Brand Name: sandy scientific
• Model Number: sandy 5005

Double walled chamber, inner made of polished stainless steel sheets and outer made of cold rolled mild steel sheets with powder coat finish. The wall is insulated with special grade glass wool. The inner chamber accommodates ones no. easily removable stainless steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity. An outer double door with inner full view acrylic door permits inspection of specimens. Heating Element is Imported Nichrome wires and Temp. Is controlled by Automatic Digital Indicator Cum Controller working in conjunction with PT 100 sensor. Powerful air circulator creates positive airflow through the incubator. The shaker is driven by a variable DC motor with variable speed control panel accommodating, digital controller, pilot indicating lamps, ON/OFF switches etc., will be provided at the top of the unit.Platform Holding Capacity : 16 Conical flasks x 500ml 24 Conical flasks x 250ml Optional Extra Cost : Digital RPM indicator Digital Time (0-9999) Chamber Illumination-two fluorescent lamp Chamber illumination by two U.V lamps instead Of fluorescent Lamp Voltage stabilizer