Independent Chucks Dealers

• Type: Small Independent Chuck-4 Jaw with Back Plates
• Country of Origin: India
• Model Number: AMRTC-XX.4
• Brand Name: ASSORTS

A high quality 4 jaw independent chuck, the body of which is made from sg iron & jaws are of tool steel hardened & ground. Same jaws are reversible as well. Supplied with a mounting back plate & fixing tee nuts with screws. The back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is standard unimat thread m14 x 1 prod. Code chuck diameter designed for amrtc-70.4 70 mm 3" & 4" rotary table amrtc-80.4 80 mm 4" & hv4 rotary table

Technical features : * body : made from high strength cast iron and machined within tolerance for accurate fitting of jaws, screw and screw and screw lock hardness 180-210 bhn. * jaws : jaws are made of low carbon case hardening steel and harden in modern heat treatment plant. Jaw's slots are ground for accurate fitting and long life. Hardness 55-60 hrc. * screw : made from case hardening alloy steel and harden and ground bearing areas for longer life. * screw lock : case hardened steel and harden to provide longer life.

• Size: 15-30mm, 30-45mm, 45-60mm, 60-75mm, 75-90mm, 90-105mm
• Type: Independent Chucks
• Material: Stainless Steel
• Diameter: 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm, 60-70mm, 70-80mm
• Shape: Round
• Thickness: 10-15mm, 5-10mm
• Certification: ISO 9001:2008 Certified
• Grade: IS
• Color: Shiny Silver
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile
• Condition: New
• Finishing: Polished
• Technics: Black Oxide
• Country of Origin: India

• Shape: Round
• Diameter: 48 Inch
• Material: Cast Iron
• Brand: BMT Gold
• Corrosion Resistance: Yes

• Size: 630, 710, 800, 900. 1000, 1200, & 1600 mm

Oil country lathes are heavy duty lathes with a big bore main spindle. Four jaw independent jaw chuck one in front end and one in the rear end of the spindle is mounted with a suitable chuck flange. It is used for handling oil pipes for threading and casings.

We are offering independent lathe chuck, dog chuck etc. Kic brand independent lathe chucks are manufactured specially for heavy duty and rigid gripping. Bodies of graded casting are made from selected material, brinell hardness is kept to the standard ratio. The whole body is finished. test : every chuck after completion is put on test, the gripping of jaws is tested by dial indicator. grinding : round back and front surface of body are grinded for accurate running. Every step of jaws is grinded to precision, accurate and for exact holding. supervision : finally every jaw is checked with the micrometer under specialised supervision every time. The parts of chuck are interchangeable. every chuck is supplied with one operating key and a set of mounting bolts.

• Features: Long service life, Immaculate finish, Simple design, High efficiency, Enhanced durability, Crack resistance.

As the name suggests the Independent chuck is that lathe machine chuck whose jaws operate independently. This is used where the job is irregular or noncylindrical in shape. Since each jaw operates separately with the help of key, it can hold most of the industrial jobs. These chucks can be directly mounted on the back plate and have ID & OD gripping. We at Deluxe Chucks excel in making sizes varying from 110 mm to 1800 mm of High quality, Lightweight, seamless & rigid C.I. casted body. Category: Chucks   Our specialty chucks that made our brand popular with the name Deluxe is manufactured with the highest precision and best machinery setup throughout the region. These chucks are used for a short taper that can be directly mounted without a backplate. These chucks are mainly used for odd shaped products. Deluxe chucks symbolize chucking technique on machine tools. Our products distinguish themselves through quality, precision and durability being thoroughly checked by our vigilant quality control Department on modern test and experimenting devices. Every individual chuck is tested for concentricity on diameter and face trueness for both the forward and reverse jaws.

These chucks have slim bodies and are light in weight. This reduces overhang and spindle nose to a minimum. These arc suitable for use on small lathes and grinding machines etc. Bodies of these chucks upto 100mm are nude of Steel and Other Sizes from SG Iron. Screws are made of high strength Alloy Steel. The Screws have ACME threads. Screws are properly heat treated to obtain best combination of wear resistance and toughness. Jaws are made out of Case harden ing sneel and arc .suitably heat treated. The gripping portions have hardness of 57 to 62 HRC. These arc precisely ground for perfect fitting in the body. Thrust Beatings are made out of Alloy Steel and are heat treated for toughness. Operating key of suitable strength is provided wirli each chuck. Mounting bolts, Tap & Inspection report is provided with each chuck.

We are offering heavy duty independent lathe chucks. these chucks are available in both single and double slot types. single slot chucks are available in sizes rangng from 80mm-600mm. double slot chucks are available in sizes ranging from 305mm-600mm.

Independent Lathe Chucks are built specially for heavy duty and strong grips. Bodies of Semi-Steel are made from selected material. Brinel hardness is kept to the standard ratio. The body is grounded finished.   Features Reversible gripping jaws robustly proportioned care hardness and ground for precision work position. All gripping jaws individually tested for Rack well hardness between 55-60 to ensure reduced wear & tear. All gripping jaws accurately ground to give maximum bearing surfaces. Screws are made from tested materials and quality as double bearing type to ensure long life. Operating screws tested to Rockwell hardness of 30 to 35. Jaws and Screws are made in ACME thread. Body of chucks made from graded casting.

Specially designed for use on small precision machines which are light in weight and where chuck weight is critical for the machine. The bodies of 80mm and 100mm chucks are made out of steel and above 100mm from SG Iron. This property of being light weight helps to retain the precision of the bearings of the machine for long time.

Salient Features: KIC Brand Independent Lathe Chucks are manufactured specially for heavy duty and rigid gripping. Bodies of graded casting are made from selected material, Brinell hardness is kept to the standard ratio. The whole body is Finished. Test : Every chuck after completion is put on test, the gripping of jaws is tested by Dial Indicator. Grinding : Round back and front surface of body are grinded for accurate running. Every step of jaws is grinded to precision, accurate and for exact holding. Supervision : Finally every jaw is checked with the micrometer under specialised supervision every time. The Parts of chuck are interchangeable. Every chuck is supplied with one operating key and a set of mounting bolts.

• CHUCK SIZE INCH: 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 30
• CHUCK SIZE MM: 100, 150, 200, 250, 300, 350, 400, 450, 500, 600

Independent 4 Jaws Lathe Chuck Have Each Jaw Mounted On A Thread Spindle Allowing Independent Adjustment. Hardened Solid Jaws. Sizes Up to 96”. Bigger sizes also available. Flat Back.

CHUCKS WITH HIGHER GRIPPING , RIGIDITY , DURABILITY . SPECIALLY USED FOR SPECIAL PURPOSE JOB 2 NOS GRADED CASTING AVAILABLE IN 2 JAW , 3 JAW , 4 JAW 6 JAWS , 8 JAWS

• Shape: Round
• Material: Stainless Steel
• Material Grade: SS316
• Finishing Type: Powder Coated
• Weight: 30kg
• Automation Grade: Automatic

Heavy Duty chucks refereed as HD, are suitable for normal working conditions. However these chucks will stand well ahead in Quality, Load carrying capacity and Life if compared with other competitive brands available in the market. Where other brands of chucks fail to give service, our chucks will give trouble free service for long period. The jaw-ways in body are of robust proportion which can withstand heavy loads. The diameter of screws is large enough to tolerate heavy cutting pressure and moreover large diameter of screws provide more contact area with threads of jaws. ACME threads of screws are very strong as the same have 29 degree taper. These do not break easily due to strength provided by large base of taper thread. Chucks from 160mm onward have double type thrust bearings of robust proportions which provide great strength. Operating Key, Mounting Bolts & Inspection Report is provided with each chuck.

independent 4 jaw chucks, Self Centering Lathe Chucks, bearing chucks, jaws