Medical Air Dryers Dealers

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, expensive instruments, etc which results in the downtime of whole system. Summits Refrigerated Air Dryers remove the moisture to a level of 600 ppm(w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, evaporator and moisture separator) are integrated into one single unit.

We are instrumental in bringing to you a superlative range of Laboratory Spray Dryers, which is a completely self contained unit and is ready for immediate operation. Our range of Laboratory Spray Dryers is compact and can be kept on a table top or bench. This range of Laboratory Spray Dryer is popular for their corrosion resistant feature and robustness and is offered at leading market prices. Salient FeaturesEasy functioningRequires only single operationAccurately controlPanel is characterized with Inlet Temperature controller, Outlet Temperature indicator, On/Off switch and indicator for blower, heater, air compressor, feed pumpLCD display for pump speed controlEquipped with compressed air pressure control Technical InformationWater evaporation at Inlet temperature of 250oC(Approx1500ml/hr)Air inlet temperature ranges up to 250oCHeater capacity : 3 KwhDimensions : 700x600x450 mm (H) (W) (D)Spray System : 2 Fluid nozzleSpray/hot airflow : Downward Co-current/ Upward counter Co-currentAir Compressor : InbuiltPower Supply : 230V-50Hz. 15 Amps ApplicationsPharmaceuticalsCeramicsFlavorsFoodstuffsTanning agentsBio-chemicalsHerbal extractsDyestuffs and pigmentsInorganic and organic chemicals Plastics

We are a highly renowned Supplier of the best quality Lab Spray Dryer. Lab Spray Dryer is manufactured by the professionals using supreme-class raw materials in compliance with international quality standards. Our offered Lab Spray Dryer is highly appreciated for its rigid construction, corrosion resistance, high performance, reliability and energy efficiency. Lab Spray Dryer is widely used in various industries such as Pharmaceutical, Food Processing and many more. Technical Specifications : Mains voltage : 230 V/ 50 Hz (220V-240V) Power Rating : 2900W Current Consumption : 12A Evaporation Capacity : Max. 1.00 L/hr H2O Aspirator Blower Capacity : max. 118 Nm3/hr Temperature of Drying air : 250o C + 1o C Accuracy Heater Capacity : 2.0 KW Compressed air for spray flow : 2-5 bar Nozzel : Two-fluid, co-current, SS-316L,0.7mm with Auto De-blocking Device Material of construction : Main Stand : SS-316L Heating Apparatus : Borosilicate Glass Dimension L x W x H : 50 x 60 x 100 cm Weight : 60 kg Optional Accessories : Counter-Current Nozzel Twin Cyclone Attachment Spray Congealing Attachment Variable Nozzel apertures-0.5,1.0,1.5mm Nitrogen Inert Loop hot Melt System. Applications : Pharmaceuticals Ayurvedic Herbals Food Products Biochemical Perfumes Flavors Aromatics Cereal products Polymers & resins Ceramics products Chemicals For R&D and Standardization Broad Range Of Applications : Spray drying and micronization. Microencapsulation and coating. Structure conversion. Recovery of synthetic and extracted products.

Dryspell medical dryers or Breathing Air Systems delivers a dewpoint of +2oC as mandated by NFPA 99. The dryspell medical dryers operates in the principle of pressure swing adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation. Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Optional purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Optional dewpoint and Co monitor enables to monitor dewpoint and Co levels as mandated by NFPA 99.

Dryspell medical Dryers delivers a dewpoint of +2°C as mandated by NFPA 99. The dryspell medical dryers operates with the principle of Pressure Swing Adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Dewpoint and CO monitor enables ti monitor dewpoint and CO levels as mandated by NFPA 99    

(30 Kg. with Specially Designed Filter Bag ) The basic concept of the Fluid Bed System begins with a simple Drying unit to which several different optional packages may be added for conversion to a granulation or coater. SPECIAL FEATURES Uniformity in drying and reduction in drying time. Atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns to prevent any fine dust to pass through the product. Steam Coil made out of 1" dia. SS 304/316 finned tube & is designed to get pressure of around 3-4kg./cm^2 (working pressure 3 kg/cm^2). ADVANTAGES The conventional drying method for drying products in tray dryers is rather inadequate & troublesome. They also occupy large space & have very high & uneven drying times and also involved high labor input. To overcome this problem RIDDHI made Fluid Bed Dryer which is the simple sol

We are offering laboratory spray dryer. Laboratory spray dryer has been indigenously developed by jisl laboratory equipment division. It is designed with a ss-316 material & reinforced with flameproof motors, to withstand the effect of acid & solvent spray drying. It lets you spray dry with acqueous as well as solvent based solutions. technical specification mains voltagepan> : 230 v 50 hz (220v-240v) power rating. : 2900w current consumption : 12a evaporation capacity : max. 1.00 lhr h2o aspirator blower capacity : max. 118 nm3hr temperature of drying air : 250° c ± 1° c accuracy heater capacity : 2.0 kw compressed air for spray flow : 2-5 bar nozzel : two-fluid, co-current, ss-316l,0.7mm with auto de-blocking device material of construction : main stand : ss-316l heating apparatus : borosilicate glass dimension l*w*h : 50 * 60 * 100 cm weight : 60 kg rs-232 port for pc printer interface : available with spraymate lsd 348 spraywin software : available free with spraymate lsd 348 optional accessories : counter- current nozzel twin cyclone attachment spray congealing attachment variable nozzel apertures-0.5,1.0,1.5mm nitrogen inert loop hot melt system.

Filtration Technik India Pvt. Limited Medical compressed air filters stand for premium quality and are among the world's best industry standards today,Housings with threaded connection from G 12 to G3,High grade aluminum casting,Alu-chromed in and outside to prevent corrosion,Powder coated to ensure top quality finish,Micro filter Modular Concept can simply and economically install filter combinations, The tie rod fixing of the element to the housing ensures that the lower end cap of the element is firmly secured to the tie rod.

The compressed air is passed through a pressure vessel with two “towers” filled with a media such as activated alumina, silica gel, molecular sieve or other desiccant material. This desiccant material attracts the water from the compressed air via ‘adsorption’ process. As the water clings to the desiccant, the desiccant “bed” becomes saturated. The dryer is timed to switch towers based on a standard time cycle, once this cycle completes some compressed air from the system is used to “purge” the saturated desiccant bed by simply blowing the water that has adhered to the desiccant off. Technical Specifications:

Medical Air Dryer, Spray Dryer, Air Dryer Cartridge, Solar Drye

Laboratory Spray Drye

Fluid Bed Equipment, Bag Dumping Station, Drag Tube Conveyo

Medical Air Dryers, Spray Dryers, Refrigerant Type Air Dryer

Medical Air Dryer, Washing Hois

Medical Air Dryer, Voltas Drinking Water Cooler

Medical Air Dryer, Stainless Steel Shock Absorbers, Gas Sprin

Medical Air Dryer

The dryspell medical dryers operates in the principle of pressure swing adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.

Medical Air Drye

Medical Air Dryers, Saw Blade Sharpener, Laminar Air Flow Cabinet

Medical Air Dryers, Cartridge Filter System, Bag Vessel Assembl

Medical Air Dryer, Diesel Engine Driven Compresso