Metal Primer Dealers

Consider our name, if seeking for high quality products that are prepared using the best grade material and modern technology. Our associates procure it from the reliable names after complete quality satisfaction. To ensure the finest quality, our team makes every endeavor to present a qualitative and certified array of products.

Softouch metalprimer for the wood surfaces. This primer directly applies on the newly metal surface. After that softouch synthetic enamel should be used. Softouch metal primer is available in packing off 20ltr, 10ltr, 4ltr, 1ltr, 500ml, 200ml.

rishi hardware is an eminent Supplier of Metal Primer. Metal Primer is a paint product that allows finishing paint to adhere much better than if it was used alone. For this purpose, Metal Primer is designed to adhere to surfaces and to form a binding layer that is better prepared to receive the paint. Metal Primers, offered by us, are engineered to have more aggressive filling and binding properties with the material underneath. Sometimes, this is achieved with specific chemistry, as in the case of aluminum primer, but more often, it is achieved through controlling the Metal Primer's physical properties such as porosity, tackiness, and hygroscopy.

Primers are liquids that may be applied to a substrate prior to application of an adhesive or a sealant. The reasons for their use are varied and may include, either singularly or in combination, the following: Protection of surfaces after treatment.Promoting chemical reaction between adhesive and adherend. Inhibiting corrosion of the substrate during service. Serving as an intermediate layer to enhance the physical properties of the joint and improve bond strength.Being lower in viscosity than the adhesive or sealant, primers can be used to penetrate porous or rough surfaces to provide better mechanical interlocking and for sealing such surfaces from the environment. Primers are often applied and appear as protective surface coatings. Application processes and equipment for applying primers are similar to those used in applying a paint coating to a substrate. The application of a primer is an additional step in the bonding process, and it comes with associated costs and quality control requirements. Therefore, primers should only be used when justified. The most likely occasions when a primer is needed are: when the adhesive or sealant cannot be applied immediately after surface preparation, when the substrate surface is weak or porous, or when the adhesiveadherend interface requires additional protection from environments such as moisture.

Customers appreciate us as one of the highly credible Indian Manufacturers and Suppliers of premium quality Primers. These Primers are processed with premium grade, pure chemicals. Primers are rigorously tested by quality controllers to ensure 100% protection of the surface of its application. We make these Primers available to our clients at competitive market prices. The Range Of Primers Offered By Us Includes Putty Paint WhiteRed Oxide Metal PrimerWood Primer PinkWood Primer WhiteCement Primer White Oil BaseCement Primer White Water Base Packaging : 200ml, 500ml, 1, 4, 10, 20 Ltr.

Our Quick Drying Primer is a versatile and efficient primer designed to expedite the painting process without compromising on quality. This primer is formulated to dry rapidly, allowing for faster turnaround times and increased productivity in various painting applications. It provides a durable base coat that enhances adhesion, promotes uniformity, and prepares surfaces for subsequent coats of paint or finish. Key Features:- Rapid Drying:-Dries quickly to touch within minutes, allowing for faster application of subsequent coats or finishes. Enhanced Adhesion:-Promotes strong adhesion to a wide range of substrates, including metal, wood, and masonry. Versatile Use:-Suitable for interior and exterior applications, providing a reliable base for paints, enamels, and topcoats. Seals Porous Surfaces:-Seals and primes porous surfaces effectively, reducing the number of coats required for a smooth finish. Improves Paint Performance:-Enhances the durability and longevity of the topcoat by providing a stable and uniform surface. Ease of Application:-Applies easily with brush, roller, or spray equipment, ensuring even coverage and minimal downtime.

We are offering primer. Scope: epoxy coating is a two part system which are mixed before the application. the two parts consist of 1) an epoxy resin which is cross linked with 2) a co- reactant or hardner. It produces a hard, chemical & solvent resistance finish. a two pack epoxy coating with superb performance in severe marine & industrial environment. The product has excellent resistance to chemicals, solvents, fumes, splash & spillage. Use: recommended for use on offshore platform structural, helideck & accommodation areas as well as underdecks & above water area jackets. the product is also suitable for application on ms & concrete areas of fertilizer plants, chemical units, refineries, petrochemicals etc. Product data: type two pack, cured with polyamide composition catalyzed epoxy resin suitably pigmented. Viscosity (ford cup b4) 70±10 seconds specific gravity 1.05±0.05 mixing ratio base: catalyst(4:1) by volume pot life 4-6 hours application brush conventional airless spray recommended dft 30±5µ per coat theoretical spreading rate 6-7 sq.mtr. Liter drying time 1. surface dry-40 - 50 min 2. tack free- 4 hours 3. hard dry-over night curing time 6-7 days over coating interval min: overnight max: 5 days flash point above 40˚c colour as per is & ral k5 shade cards packing 20 liters thinner pragati make epoxy thinner finish smooth & matt semi glossyglossy after complete curing of paint following tests should be carried. No. examine test specification result 1. adhesion test after 24 hrs. ( no lifting of film form) pass 2. scratch hardness test 1500-2000 gm. pass 3. flexibility to pass ¼ inch mandrel pass 4. salt spray 150-200 hrs. pass 5. humidity test 140 hrs. No blistering rusting & no loss of adhesion

We have different payment options to choose from as per the convenience of the clients. In the type of operation processed online, the procedure depends on the gateway or processor model; both of them ensure complete security. Enlisted with the prominent names, we have a well-maintained set in Ahmedabad(India) and cater to different markets.

We manufacture and supply smooth Red Oxide Primer which is guaranteed to be of uniform consistency. The primer that we supply is of good quality and is made using the best and most reliable raw materials to ensure that the primer stays on for a long time. The colour of the primer we manufacture is rich and lasting and is quality assured to be resilient to damage and weathering over time.

Nippon Red Oxide Metal Primer is a specially formulated undercoat for metal surfaces. It has anti-corrosive properties and provides good adhesion to the top coat.

Our customer-centric approach while making online or offline procedures makes us a reliable name. We keep a close eye on the transactions made to keep all the information shared by the clients safe and confidential. Carrying out systematic quality process at every stage, we keep our quality standards high to gain customers' satisfaction.

Our Red Oxide Primer has high resistance to high humidity and saline atmosphere. To offer complete satisfaction to the clients, we ensure that we deliver only faultless range of products and thus we store the entire lot in our secured and capacious warehousing unit. Well-known Suppliers of red oxide primer; we are reckoned for the exceptional range of products that we offer.

Indigo Paints ST Metal Primer is a value for money alkyd based metal primer used as an undercoat for ferrous metal surfaces. Surface Preparation & Application: Stir contents thoroughly. Clean the surface to be painted by removing all loose particles,grease, dirt, rust etc. Apply one coat of ST Metal primer. Allow to dry for 4-6 hours. Any undulation can be filled using Indigo Knifing Paste Filler Grey. Allow to dry. Sand the surface and apply one coat of Indigo ST Metal Primer. Allow the film to dry overnight before applying the topcoat. Advantages Good opacity Good adhesion

We are main supplier of this product.

Metal Primer, Cement Colour, Metal Primers, Industrial Chemicals, Extender