Modular Valve Dealers

• Number Of Stacks: 1 to 5 stacks
• Valve Size: 1/8 Inch
• Max. Operating Pressure: 250 Kgf/cm2
• Max. Flow: 35 L/min

01 Series Modular Valves Installation and mounting space can be minimized. No special skill is required for assembly. Any alteration/addition to the hydraulic circuit can be made quickly and easily. Problems such as oil-leaks, vibration and noise which may be caused by piping are minimized, increasing the reliability of the hydraulic system. Maintenance and system check-ups can be easily carried out as they are normally installed in stackable units.

• Type: Modular Valve, Fire Extinguisher Modular Valve
• Feature: Durability
• Condition: New
• Pressure: 15
• Port Size: 30 Mm
• Country of Origin: India
• Material: Brass

We are leading manufacturer of fire extinguisher modular valve. It's used in fire extinguisher cylinder.

We are supplying a wide array of modular O Check Valves. Our valves are designed by experienced professionals along with advanced machinery, to create impeccable products. These products are primarily designed for long-lasting and high efficiency. Furthermore, the products quality checked to ensure the satisfaction of our esteemed clients. Features: High durability Optimum performance Easy to install Strongly built Specifications: Superb quality Reliable Elegant designing

We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements. We have a skilled team of quality experts that stringently checks each and every product at different stages.

Unmatched Combinations and Possibilities Ideal for independent control of multiple cylinders or functions Relief valve and pilot-operated check accessory valves are stackable between manifold and valve body Remote and pump mounting

The selection of modular valves, to suit a particular function or hydraulic circuit are made in exactly the same way as conventional valves, taking into account the flow and pressure of each valve to be used. In some cases, the stacking system may be restricted, so please refer to the following instructions for stacking sequence.

• Max. Operating Pressure kgf/cm: 250

Modular valve 38 Pilot Operated Check Modular Valves, Typical Performance Characteristics: Hydraulic Fluid: Viscosity 35cSt (160SSU), Specific Gravity 0.850.

• Valve Type: Relief
• Material: Aluminium
• Operating Pressure: More Than 100 Bar
• Media: Oil
• Temperature Pressure: Medium Temperature Pressure
• Automation Grade: Manual
• Connection Type: Threaded
• Color: White
• Actuation Type: Hydraulic
• Packaging Type: Carton

• Country of Origin: India
• Feature: Longer Life, Rugged Structure
• Power Source: Hydraulic
• Port Size: 0-5mm
• Color: Green
• Material: Metal
• Series No.: MSW-01, MSW-03, MSW-04, MSW-06, MPW-01, MPW-03, MPW-04, MPW-06, MBA-01, MBA-03, MBP-03, MBB-01, MRP-01, MRP-03, MRP-04, MRP-06

We are known as one of the famous Modular Pressure Reducing Valve Exporters, Importers, and Suppliers, situated in New Delhi, India. The Modular Pressure Reducing Valve, offered by us, is available in a comprehensive range, which is suitable for every type of machine and equipment. The Modular Pressure Reducing Valve can be acquired from us at the most competitive prices. Attributes Resistance against corrosion Excellent durabilitySmooth finishingOutstanding performance

• Feature: Solids proof design, seat design protecting against jamming Body cavity equipped with purge connections to flush the cavity and ball during emptying cycle Full 180° stroke Can be operated at full process pressure, no through flow

Metso's Neles M series pocket feeder valve for separator service in pulp and paper industry is designed for automatic removal of sand and other fine debris from the process. Typical applications are the chip chute circulation process of a continuous pulp digester and other junk traps. Complete unit consists of a full-bore ball valve, pneumatic actuator, limit switches and solenoids for purging the interior cavity of the valve.

Double Throttle cum check,non pressure compensated,modular construction. Can be used as Metering-in or Metering-out devices.

• Pressure: .315 BAR
• Material: CAST IRON
• Usage/Application: Industrial
• Brand: PRISM
• Valve Size: 10, 16, 20, 30
• Media: OIL
• Model Name/Number: PRUV S 10 100 P Y A A 01
• Temperature: -20 c to + 70 c

We are offering reducing modular valves. Features this valve is employed to keep the pressure of some circuit lower than the main circuit pressure. drain port should be connected to tank. pressure difference between primary pressure and secondary pressure should be maintained over then 10 bar for good pressure reduction. pressure cannot be adjusted if a certain flow rate cannot be obtained. the pressure will be increased when the pressure adjustment handle is turned clockwise, and will be reduced when the pressure adjustment handle is turned counter-clockwise. be sure to re-tighten the llock nut firmly after making adjustment to the pressure. [!–vmcatalog{div}–] [!–vmcatalog{div class=”clear-fix”}–] [!–vmcatalog{div id=”product-tabs”}

The modular valves are functional elements with which a hydraulic system can be built easily by stacking them with the mounting bolts. Therefore, no piping is required for the manufacture of the hydraulic systems. Yuken’s 06 Series Modular Valves are widely used in hydraulic systems for the various industrial and marine equipment including machine tools, special purpose machines, presses, steel mill equipment and ships.

• Brand Name: Protocontrol Instruments

We are offering Modular Solenoid Valve. Protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. Gems Sensor & Control, designs and manufactures a broad portfolio of liquid level, flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. Gems Sensors & Controls has manufacturing facilities in USA, UK, and China. The B Series is a direct acting solenoid valve, available in 2- or 3-way functionality. Like all of our valves, the B Series has bubble tight plunger construction and is designed to last for millions of cycles in general purpose liquid, gas, and vacuum applications. The B Series is available in various orifice sizes, a variety of body materials, wattages, and coil construction for the utmost adaptability to your application requirements. The B Series is an excellent choice for most general-purpose applications requiring a CV of 0.018 to 0.430.

• Pressure: Up to 350 bar
• Sizes: NG 4

Plate manifold is sleek in construction and the design eliminates possibility of inter-block leakage. Bar manifold uses standard Side Ported Valves and also offer compact manifolding. Sub Base gang beyond 6 valves is offered in combination of plate manifold or as block manifold.