Non Shrink Grout Admixture Dealers (18 products available)

• Tensile Strength (W/P - 0.18): 3.5N/mm² @ 28 days
• Pullout bond strength: 17 N/mm² @ 7 days
• (W/P - 0.18): 20 N/mm² @ 28 days
• Time for expansion Start (after mixing ): 20 minutes
• Time for expansion Finish(after mixing ): 120 minutes
• Fresh wet density: Approximately 2220kg/m³ depending on actual consistency used
• Young's modulus (ASTM D469 - 94): 28 kN/mm²
• Coefficient of thermal expansion: 11 x 10 -6/ 0 C
• Unrestrained expansion: 2 - 4 % in the plastic state enables to overcome shrinkage
• Pressure to restrain: 0.004 N/mm² approx.
• Flow Characteristics: The maximum distance of flow is governed by the gap width and the head of the grout

• Color: grey
• Form: powder

Provides waterproofing barrier - filling of cracks in concrete, bricks and similar building material - used in foundation drafts, const joints, etc. - grouting of machine foundation - grouting for bridge bearing.

• Packaging Size: 25kg
• Packaging Type: pp bag
• Color: Gray
• Brand Name: fosroc
• Grade: gp2
• Item Code: gp2

• Type: Grout Admixture
• Standard: M32
• Shelf Life: 24 Months
• Form: Powder
• Packaging Size: 25 Kg
• Brand: Sika
• Usage/Application: Construction
• Coverage Area: 800 sq ft
• Bond Strength to Concrete: 10 N/mm2
• Substrate Temperature: +10 Degree C min. / +40 Degree C
• Mixed Density: 1.9 kg/l
• Layer Thickness: 50 mm
• Chemical Base: Cement, Special Additives, and Aggregates
• Bulk Density: 1.15-1.60 kg/L +27 DegreeC
• Modulus of Elasticity in Compression: 30 GPa
• Tensile Strength in Flexure: 9 N/mm
• Splitting Tensile Strength: 3.5 N/mm
• Tensile Adhesion Strength: 2 N/mm
• Expansion: 4 %

• Packaging Size: 20 Kg
• Packaging Type: Bag
• Shelf Life: 2 years
• Country of Origin: Made in India
• Brand Name: Hawks
• Usage/Application: Construction
• Type Of Admixture: Pc Based Admixture
• Dosage: 250 gms Per Bag Of 50 Kg Cement
• Surface Of Application: Interior surface
• Form of Paint: Powder

Perma Plaster Mix is a grey free flowing powder which needs only addition of water to form a good consistency mortar. Perma Plaster Mix is a mortar mix with log of advantages over conventional mortars. Perma Plaster Mix is reinforced with PP fibers. the resulting plaster is waterproof. Primary Uses : For small repair works there have been lot of in conveniences. bringing sand sieving and mixing the mortar for plaster have worked our very expensive for small repair jobs. such small repairs of plasters have created shrinkage cracks. to avoid all these difficulties, Perma has introduced Perma Plaster Mix a ready to use plaster mortar for plastering. Perma Plaster Mix jut requires addition of water to produce plastering material with the least hassles a nd all the advantages. Perma Plaster Mix can be used advantageously on big site where a good quality water proof plaster work is desired. Advantages : Perma Plaster Mix produces absolutely non shrink mortars. it is economical when compared with the inconveniences of procuring and sieving right grades of sand. the material is workable and has ease in application. Packing : 20 kg & 40 kg Sack

• Material: Galvanised Iron
• Color: Silver
• Length: 1.5 m
• Size: 4- 12
• Uses: Earthing
• Condition: New

Ours is a well-established firm located in Bellary(India) and engaged in the business of providing a wide assortment of quality products. Seeking a trusted Non-Shrink Grout supplier? Our organization is the best one and able to fulfill wholesale orders.

• Raw Material Base: Hydraulic Binders, Select Grade Fillers
• Maximum Grain Size: 6 mm
• Water for plastic Consistency, %: 12 to 14 %

CMPL Grouts are non-shrink, free-flowing, high compressive strength, non-metallic grouts. They are oil& water resistant, chlorine free easy-to-use, pre-mixed cementitious grouts for foundation grouting operations. They develop very high compressive strength and unlike metallic grouts do not generate gases leading to a bond failure at surface contact. They are based on expansive hydraulic setting binder systems which impart controlled expansion that ensures permanent bond between machine & foundation. CMPL grouts are capable of withstanding dynamic loads without disintegrating. Dynamic load tests conducted on CCM™-Shrink-800 has shown that 40X40X80mm specimens stood without damage 2 million cycles of stress fluctuations between 5kg sq.cm. At 500 cycles per minute. They also have very high 7 days pull out bond strength of 200 kg. sq.cm. They are ideally suited for foundations grouting applications of steel structures, cranes, rails, anchors, bolts, base plates, bridge bearings, pumps, motors, compressors, generators, mills, turbines, and many more applications. Flow able & self-levelling properties ensure complete filling of all voids and leads to perfect bearing.

• Packaging Type: BOX
• Packaging Size: 500 GMS
• Brand Name: PERMA

Non Shrink Grout Admixture, Flooring Solutions, Waterproofing, Waterproofing

Non Shrink Grout Admixture, Chemical Anchor Adhesive, Acrylic Bonding Agent

Non Shrink Grout Admixture, admixtures

Non Shrink Grout Admixture, Crystalline Waterproofing Coatings

Non-Shrink Grout, Epoxy Bonding Agent, waterproofing mortar

Non-Shrink Grout Admixture, Kem Brush, structural repairing services

non-shrink grouts, ready mix concrete mix, pre mix plaster