PTFE Insulated Wires Dealers

• Type: Insulated
• Conductor Material: Copper
• Insulating Material: Silicone
• Available Color: White, Black, Red, Yellow etc
• Temperature: -65oC To + 260o C

• Conductor: 12 AWG to 24 AWG (2.44mm to 0.51mm) as per ASTM E 230 - ANSI MC 96.1
• Core Insulation: Braided Fiber Glass with high temperature impregnation
• Construction: Parallel Conductors
• No of Pair: 1
• Outer Sheath: Braided Fiber Glass with high temperature impregnation
• SS Jacket: Optional Outside SS Metal braid

• Conductor Material: Copper, Silver Plated Copper
• Insulation Material: FEP Fluorinated Ethylene Propylene
• Color: Multicolour
• Application: Electrical Industry
• Type: Ptfe Insulated Wires
• Country of Origin: India
• Brand: Chetan

• Brand Name: Tanya
• Product Name: Ptfe Insulated Spc Stranded Wire
• Temperature: (-) 60º C to (+)260 ºC.
• Condition: Good
• Place Of Origin: Meerut,U.P

We offer supreme quality Ptfe Insulated Spc Stranded Wire which is well-marked in the industry for its durability. The PTFE Coated Wire is efficient enough since it is non-flammable and weather-proof. The PTFE Wires that we offer, can withstand a huge range of temperature from (-) 60º C to (+)260 ºC. It is insulated properly so as to ensure 100% safety. We are among the reliable PTFE Wires Suppliers in India. Besides, we are renowned PTFE Insulated Wires Exporter based in India. Few notable properties are as under: Non-Flamability: The Insulation is fire (Flame) proof i.e. non-flamable. Flexibility: P.T.F.E. wires are manufactured with best available stranded copper wires, giving better flexibility for comfortable use in the wiring. Working Temp.: It's working Temperature range is (-) 60° C to (+) 260° C. Weather Resistance: The insulation have not shown any notable changes in it's electrical, mechanical or chemical properties even after out door exposure for over 20 years. It is also unaffected by exposure to ultraviolet rays. Chemical Resistance: Insulation is inert to virtually all known Acids, chemicals and solids. Electrical Stability: Insulation electrical properties do not change even after long-term heat aging. Insulation has low dielectric constant and dissipation factor, it's high dielectric strength and insulation resistance shows minimum changes over wide temperature, frequency and voltage fluctuations. Space Saving: P.T.F.E. wires is of less O.D. for the same current carrying capacity of PVC Insulated wires, thus saves space to facilitate more no. of insulated wires in the same conduit. It's smooth surface also facilitates easy conduit pull. We defined few properties as above, but PTFE Insulated wires have more unique properties such as antistic, non-contaminating, non-toxic, resistant to fungus, non-wet, resistant to impact, tearing, abrasion, cut-through and cold-flow etc.

• Country of Origin: India
• Application: Electrical Industry
• Voltage: 220V
• Insulation: PTFE
• Temperature: 0-100 Deg C
• Brand Name: Bhuwal Cable

• Insulation Material: PTFE
• Color: Available In Many Colors
• Application: Industrial
• Type: Insulated
• Country of Origin: India
• Size: 0.5 mm, 0.75 mm , 1mm , 1.5 mm , 2.5mm , 4mm , 6mm
• Length: 100 Mtrs.

• Country of Origin: India
• Application: Electrical Industry
• Color: Red
• Thickness: 1.5mm
• Diameter: 0.30mm
• Number Of Core: Single Core
• Material: Teflon

• Conductor Material: Copper
• Insulation Material: PTFE
• Color: Black, Red
• Type: Ptfe Insulated Wires
• Country of Origin: India

We can undertake bulk orders for supply of [premium grade of PTFE Insulated Wires at reasonable rates. 

We are counted amongst the leading PTFE Insulated Wire Manufacturers and Suppliers for bring forth an exclusively customized range. We serve PTFE Insulated Wire under the brand name POLY UNIFLOW. The PTFE Insulated Wire made by us undergoes stringent quality check throughout its production cycle, to ensure the finest quality which makes it efficient to render high performance in the long run. Attributes Physical/Chemical Inert to practically all chemicals even at elevated temperatures Exceptional resistance to Ultra-Violet radiation as well as stress-cracking Resistant to fungus and mould growth Non-toxic, non-contaminating, and bio-compatible High Temperature Good thermal stability; ideal for use from -200oC to +260oC Resistant to soldering iron Fire (flame) proof Suitable for high density wiring Electrical Perfect for a very wide frequency range (DC to above 10,000 MHz) over extensive temperature range Lowest dielectric constant (2.1) Lowest dissipation factor (below 0.0003) High surface and volume resistivity Mechanical Compact design Light weight Excellent flex-life High reliability Resistant to cold-flow Cut-through resistance Salient Features Tested on physical and electrical strength Minimum shrinkage or deformation Wrapped and sintered with minimum three layers of PTFE tape that offers balanced bi-axially orientation and concentrically placed insulation Perfect surface like extruded wire that too without the shortcomings of extruded PTFE insulation No run-away problem at soldering-iron temperatures High performance Certified minimum BREAK DOWN VOLTAGE (on samples) Controlled tolerance on weight PTFE density and conductor resistance Caution Stripping of Tape-Wrapped-Sintered (TWS) PTFE insulation is commonly difficult on automatic high-speed machines. Thin-wall insulation is not suggested for higher soldering iron temperatures and for gauges larger than AWG 20.

• Size: As per Standards or customer specific requirements.
• Insulation: PTFE
• Temperature: -65oC To + 260o C
• Conductor: SPC/NPC/Bare Copper or as per customer requirements.
• Properties: Resistance to fire, chemicals, acids, sunlight, moisture and corona.
• Voltage grade: 250V/ 600V/ 1000V or as per customer requirements.
• Colour: All Electronic Colours, Bi-Colours & Tri-Colours.

Technical Characteristics Silver-plated copper :75ºC to +200ºC Nickel-plated copper :75ºC to +260ºC Voltage rating 300V, 600V and 1000 V Range : (-200 to 600 deg. C) Applications Research equipment for Aerospace Electronic Test Equipment Steel Plant /Sponge iron plant Production of Control Equipment for Atomic Energy Transformer manufacturing Process manufacturing Furnace and oven wiring Lighting industries for high wattage luminaries Manufacturing of Refrigeration equipment Manufacturing of Medical equipment Manufacturing of Heat sensing leads Manufacturing of Control Panels Chemical processing PTFE is one of the leading dielectric materials used as insulation in high performance wire and cable. PTFE Insulated Cables (Brand Name Hotway PTFE Insulated Cables) has excellent dielectric constants, low dissipation factors, a wide temperature performance range and high frequency stabilities. Our assortment of PTFE Insulated Cables includes Multicore Cable, Hook up Cable, Multi pair Cable and RTD Cable. Poly Tetra Fluoro Ethylene (PTFE), more commonly known as Teflon, is a linear polymer of Tetrafluoroethylene. The PTFE Insulated Cables chemical structure is essentially equivalent to polyethylene, except that the hydrogen atoms are completely replaced by fluorine atoms. PTFE Insulated Cable, which we offer, has a very unique position in the Plastics industry due to its chemical inertness, UV resistance, heat resistance, excellent electrical properties, and low coefficient of friction over a wider temp. PTFE differs from other fluoropolymers; it is the only one which cannot be fabricated by conventional melt processing techniques. PTFE Insulated Cables are manufacture as per JSS 51034 (equivalent to us military specification MIL-W-16878) are most suitable for Electrical Panel, Electrical equipment and instruments wiring. We offer the PTFE Insulated Cables that are used in Steel and Power Plants (Thermocouple cable, HR cable, RTD Cable) and Electrical & Electronic Industry. Used majorly for interconnection of equipment and for inter-unit and inter-panel connection, these PTFE Insulated Cables are available in different grades and sizes. Manufacturing Technique PTFE insulated wire & cable manufacturing process is not a simple process like PVC cable. in PVC manufacturing. We use extrusion process; PVC granules melt in an extruder in certain heat and cover the conductor in extrusion process. In PTFE first we make the tape from PTFE fine powder by cold extrusion than cut the tape in required width than wrap over the conductor by spiral wrapping system. After wrapping the insulated wire, we cure (sinter) at 380 deg. C by continues running process. After sintering we test the wire in required voltage and pack in coil or spool. Approvals : PTFE insulated wires & Cable is approved By Ministry of defense, Govt. of India from the body JSS (Joint services specification) Properties Flex life excellent High disruptive strength Compact in use-saves space and weight Insulation does not crack at lower temperature Availability   Available voltage grade in 250, 600, 1100 Volt AC On request we design up to 75 KV AC