Riffle Sample Divider Dealers

For the rapid collection of true representative samples from aggregates, sand and fillers, sample divider is required. Riffle Sample Divider consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flow of the material. Supplied complete with three containers.

Efficient sampling out of bulk materials/deposits is the most important for getting the true idea about the bulk material. The volume of material to be tested is usually quite huge and it requires reduction in volume in a methodical manner. The Riffle Sample Divider helps to reduce the bulk while maintaining the character of the material and thus it is a helpful, light and handy device for sampling work. The standard units are made of GI sheet and mounted on rigid steel frame and supplied with three pans and one scoop. Available in following sizes. Sizes : 13mm - 14 slots Sizes : 20mm - 16 slots Sizes : 25mm - 16 slots Sizes : 40mm - 16 slots

Riffle Sample Dividers (AIM 445, AIM 446)   For the rapid collection of true representative samples from aggregates, sand and fillers, sample divider is required. Riffle Sample Divider consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flow of the material.   Application Sample Testing Industry Civil Infrastructure Construction Chemicals Dams & Tunnels Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Tiles Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Traffic & Transportation Railways Roads, Highways & Bridges

Riffle sample dividers are used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm up to a maximum of 10 mm. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers. It is fitted with a series of channels or slots of equal width that discharge the material alternatively in opposite directions into separate pans.

It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in Opposite Directions into Separate Pans. The chutes of the Riffle are steep enough to allow rapid flowing of the Materials.The instruments  has 16 nos. Chutes of 25mm width and is complete with Receivers. 

Used for sampling aggregates, ores, refractory materials, pigments, powdered coal, soap, cement, etc. It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. It has 14 chutes of 13mm width and is complete with receivers.Also available with 16 chutes of 25mm width, complete with two receivers.

We keep a stern check while the product is being developed to make sure that we deliver only flawless range. Located in Delhi(India), we ensure safe and secure deliveries, throughout the country, within the agreed time frame. We manufacture Riffle Sample Divider with high grade steel metal to classify materials liek aggregates, sand, rock etc.

We are offering riffle sample divider. n quality of each machine in manufacturing process .as we are located in mumbai we are very close to jnpt port beneficial for us from export point of view. It is mostly use in material testing process. Applications: • rock and aggregate industry • cement industry • mining • construction • ceramics industry sizes available : riffle sample splitter divider - slot width 12.5mm, no. Of slots 16 riffle sample splitter divider - slot width 25mm, no. Of slots 16 riffle sample splitter divider - slot width 50mm, no. Of slots 8

Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.

Introduction U.sed for rapid collection of the true representative sample from aggregate, sand and filters.   Consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop Available in following sizes: Size (mm)13202540No. of Slot14161616  

It consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material.

As per IS:1607-1960Used for sampling aggregates, ores, refractory materials, pigments, powdered coal, soap, cement, etc. It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. It has 14 chutes of 13mm width and is complete with receivers.Also available with 16 chutes of 25mm width, complete with two receivers.

Code: Aggregate0015 Riffle Sample Divider. Riffle Sample Divider Riffle Sample Divider from Civil Mechanical Laboratory India  Consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. Riffle Sample Divider for Civil Engineering from Laboratory Equipment Manufacturers India - The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop. Available Sizes Size: 13, 20, 25, 40 No. of Slot : 14, 16, 16, 16

BIS – 1607. Consists of a metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material.  

Used for rapid collection of the true representative sample from aggregate, sand and filters.Consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop.

These Riffle Sample Dividers are designed for rapid collection of true representative samples from aggregates, sand and fillers. Consist of a metal box fitted with a series of chutes of equal width, which discharges the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid following of the material.