Signal Conditioner Dealers

We offer Signal Conditioners. All related Signal conditioners for Accelerometers, Force sensors, Microphones and Pressure sensors are supplied. Miniature In-line chare amplifiers and ICP power supply source for airborne applications are also available.

All related Signal conditioners for Accelerometers, Force sensors, Microphones and Pressure sensors are supplied. Miniature In-line chare amplifiers and ICP power supply source for airborne applications are also available.

Canopus Instruments provides highly qualified analog signal conditioning and isolation system in India. Get the best products in the industry at Canopus Instruments.

We provide material handling automation solutions and services for the transport and distribution sector and the pharmaceutical, consumer, automotive and food industries, alongside numerous other sectors. Measurement engineering and modern automation technology devices must function properly and be able to be used anywhere. In order to continuously improve the economic efficiency of your plant you need durable , low-were productsand devices that deliver precise measurement results throughout the entire service life, even in rough industrial environments and undercritial loads. To optimise provisioning and storage costs you require simple techniques for fast installation, maintanance and extention of your plants- at all your locations. These are primarily solutions and systems for internal transport and storage such as warehouse & distribution automation, automated guided vehicle systems and in-floor chain conveyors.

115 or 220 VAC line powered Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable frequency response Auto fall-back synchronization Splash-proof front panel with status LEDs 1/8 DIN standard panel mounting Description The ATA-2001 is a general purpose, AC line-powered, LVDT/RVDT analog conditioner with digital setup and calibration. The embedded microprocessor generates a PWM-shaped sine wave and handles all calibration functions. It also controls the demodulation, filtration and synchronization of the LVDT or RVDT transducer signal. All settings are stored in non-volatile memory for restoration on power up. Zero, Gain and Phase adjustments are accomplished via the use of splash-proof front panel pushbuttons and digital voltage dividers. Intended for the most demanding industrial applications, the ATA 2001 is CE certified, and has been rigorously tested to the highest industrial standards for EMI, RFI and ESD. Features Microprocessor controlled & non-volatile memory Phase shift compensation Auto fall-back synchronization Rugged extruded aluminum housing Applications Power-gen turbine control Head box slice lip position control Roller gap position feedback Precision metrology labs

Our range of products is manufactured under the administration of qualified quality control executives by using optimum supplies and ultramodern technologies. Founded in Bangalore(India), the company has garnered wide appreciation for its seamless quality products and client centric approach.

Signal Conditioners is a wall-mounting instrument compatible with strain gauge based transducers. It can support a maximum of 4 transducers when they are connected in parallel. Signal conditioners are used to accept for further processing of output signals. After which they are converted into voltages and currents. Voltage signals are used for processing with in the system and current signals are used for transmitting over long distances and then for further processing. The features of the signal conditioner are: • Output proportional to load• Simple to operate• Reliable• Easy to install• Rugged designed for industrial environment

Signal conditioner performs the process, where the signals are manipulated to a better functioning in loadcells. This is generally applied in analog to digital conversion in converters. The model named SC – 01 – A works efficiently. It accounts for ± 0.1% accuracy. This needs the power supply of 230V, 50Hz at AC Mains. The range of input varies from 0-20mV. Signal outputted at maximum of 10V. Sensors arranged in parallel, has different output executing at 85 Ohms, which is actual minimum bridge resistance. The transduced information can be used resourcefully. The operational amplifier brilliantly utilised in this complex integrated circuits. There is effective resistance to specially built electric circuit. Temperature pressure flow should be adequately maintained. The operating temperature, where this model functions upto 50º Celcius. It can withstand varying temperatures. Hot temperatures can be effectively handled. Basically, the loadcells should will be not affected by the temperature.Signal conditioner has the circuits, which are perfectly designed to execute precise level of output. Current voltage resistance managed at proper. There will be flexible conversion of current to voltage. There are functions of clear interface and isolation. During the conversion, proper resistance to voltage can be ensured. There is clear equilibrium at positive and negative voltages. There is impressive gain in voltage. Signal influences can be checked. Distortion of signals are extremely minimised with the input impedence. During the signal conditioning, bandwidth is also an important consideration and this system works efficiently. This Stain Gauge Loadcell has the resolution of 0-1000 Counts. The drift is avoided at best. Product dimensions comes in measurements 140 x 100 x 60 mm. Enclosures are made with ABS (Acrylonitrile Butandiene Styrene) plastic case, which is less risk material and considered for safe execution and delivery.

Keeping in mind the vast requirements and demands of the customers, we are engaged in offering Signal Conditioners. These Signal Conditioners that we offer have long and reliable service life. Likewise, these Signal Conditioners are easily available in various specifications and ranges. Features: Best grade material Effectiveness Market leading price

IO configuration with 3 front keys (UP, DOWN, and MODE key). Besides IO configuration, other items such as ramp time, reverse output are configurable with these keys.4 digits Dual display for input (real value) and output (percentage) is incorporated. The indication time is adjustable within 0:00 - 60:00 (Min:Sec) for saving energy.

Universal input/output- user selectable mA, Voltage, Thermocouple & RTD inputs Dual Output unit available see Dualcon Selectable mA or Voltage output Isolated Transmitter Supply Only 12.5mm Wide on DIN rail

With an experience of over two and a half decades Canopus Instruments is considered as one of the biggest company committed to providing top quality analog device, signal conditioning unit around India. The Signal conditioning unit and analog device find applications where it is of prime importance to ensure liable performance. These modules eliminate occurrences of faulty measurements in process control equipment caused by ground loops. They are also necessary to protect the measuring equipment from noise and transients generated due to inductive load switching and other unpredictable electrical disturbances occurring in the field.

Signal Conditioners is a wall-mounting instrument compatible with strain gauge based transducers. It can support a maximum of 4 transducers when they are connected in parallel. Signal conditioners are used to accept for further processing of output signals. After which they are converted into voltages and currents. Voltage signals are used for processing with in the system and current signals are used for transmitting over long distances and then for further processing. The features of the signal conditioner are: • Output proportional to load • Simple to operate • Reliable • Easy to install • Rugged designed for industrial environment

We offer the appropriate interface device for separating, forming, processing, converting and conditioning analog signals. The product portfolio comprises analog signal isolators, isolating transducers, temperature measuring amplifiers, potentiometer amplifiers, trip amplifiers and level monitors - for simple and complex requirements, for Ex- and non-Ex applications, available in the IP20 housing for DIN rail as well as in the compact IP67 housing for decentralized on-site remote control.

2-channel signal conditioner, Universal usage at different power supplies, Dry contact or NAMUR inputs, Input frequency 1 mHz ... 1 kHz, Current output 04 mA ... 20 mA, Relay and transistor output, Start-up override, Configurable by PACTware or keypad, Line fault detection (LFD), Rated voltage: 20 ... 90 V DC 48 ... 253 V AC 50 ... 60 Hz

This is a compact rail mountable module used for converting load signal to a standard 4-20 mA or 0-10 V DC signal. It operates using a 24 V DC power supply. It supports upto 4 load cells connected in parallel. A highly stable reference voltage is used for providing 10 V DC excitation and the load cell signal is amplified using a high precision amplifier. It is ideal for use as a PLC front-end for interfacing load cell signal to analog input module.

Signal Conditioner, Data Loggers, Differential Pressure Transmitter

Signal Conditioners, Sensors, Electronic Components, Counter

Din Rain Mount Dip Programmable Isolated Signal Conditioner, GSM Modul

EMI & Signal Conditioner, Electrical Components, ETD Cores, RM Core

Signal Conditioners, Photoelectric Sensors, Sensors, Isolator