Steam Coil Dealers

• Material: Copper
• Country of Origin: Made in India
• Power Source: Steam
• Usage/Application: Water Heater
• Capacity: 100 TPR
• Tube Thickness: 9 mm

Standard Steam Coils are designed for medium temperature applications where the entering temperature is 55 degrees or higher. Our coils can be designed for various steam pressures with pitched-in casing options for quick condensate removal. Non-Freeze stream coils are designed for low temperature applications with entering air temps of 55 degrees or less. Design and production is completed with condensation removal as a high priority. These coils are designed with one header, a tube-within-a-tube configuration, and baffles which direct the steam through the inner tube allowing condensation to be evacuated through the outer tube. Opposite end configurations are available for both standard steam and steam distribution coils. We can provide the proper coil for any piping configuration. These coils do not require a tube-within-a-tube design.

we are manufactures and supplyers industrial steam boilers, thermic fluid boiler, hot water boilers, hot air generators, incinerators, industrial diessel / gas burners,  boiler coils , and all its spare parts available , more...   we are manufactures of industrial oil & gas burners, coal burners, and all its spare parts.  all type of burners make available like benton, reilo, ecoflame ,sookook, weishaupt, unigas, and more... capacity: 500 to 4million kcl/hr, its one / two/ three nozzles direct or modulation type. 

• Country of Origin: India
• Type: Steam Coil
• Material: Aluminium
• Shape: Spring Shape
• Condition: New
• Surface Finishing: Polished

We are an eminent Manufacturer and Supplier of Steam Heating Coils. The Steam Heating Coils offered by us are manufactured in compliance with set industrial norms. Strict quality-tests ensure that only defect-free Coils reach the buyers.

Capacities :1 hundred Kghr to 12 hundred Kghr.Color: Sky Blue. Material of Construction: Steel, The conventional forced circulation type water tube coil type boiler incorporating the unique principle of combustion known as ‘Reverse Flow’. It increases the combustion efficiency and allows a high rate of heat release. It can be offered in Non-IBR designs.

We are devoted towards manufacturing and supplying a wide variety of excellent quality SS Steam Coil. The provided coils are exclusively manufactured using high grade steel material and latest technology. Offered coils are highly appreciated by our clients owing to their rigid construction and optimum strength. Moreover, to avoid any flaws, our quality controllers strictly check these coils on different stages of quality parameters.

• Power Source: Electric
• Material: SS, MS
• Voltage: 220 V
• Warranty: 5 Year
• Usage/Application: Industrial
• Power: 7.5-50 kW
• Brand: Teccon
• Ambient temperature: 200-300 Degree C
• Surface finish: Paint Coated
• Fin Spacing: 2.5 FPI (fins per Inch) to 11 FPI Spacing
• Frequency: 50 Hz

Steam Distribution coils, also known as "non-freeze coils," have the tube-within-a-tube design. Our steam distributing coil is ideal to handle steam that is being modulated and/or if the air entering the coil is below freezing.  distributing construction is also available for high and low pressure applications. * "Applications include preheat, boosters, reheat, duct heaters, process air and gas heaters and more. * All sizes, shapes, capacities, circuit patterns, fin/tube configurations. * Duplication of obsolete designs; custom design for new applications. * We match existing dimensions and performance criteria for coils presently in use  

Modine steam coils are specifically designed with condensate management in mind. Tube and connection size are combined to limit condensate retention in the coil, preventing water hammer while delivering even distribution of steam on the entire face. ​With single-tube coils, the steam supply and condensate return headers and connections are normally at the opposite ends of the coil. Uniform steam distribution to each of the coil core tubes is accomplished through careful header-assembly design. The steam supply connection should be located in the centre of the header, with a perforated plate-type baffle located directly behind this connection. Carefully sized orifices are located in each of the core tube entrances into the header.   ​Dual-tube coils utilise a smaller inner tube, with precisely spaced, directional, orifice-type perforations. This helps to direct condensate flow to the return header. The steam supply, condensate-return headers, and connections may be fabricated in 'same-end' or 'opposite-end' orientation.   Application:   Commercial and industrial heating systems Commercial and industrial drying and processing applications   Specifications: Tube Material Copper Copper nickel Carbon steel Stainless steel   FIN MATERIAL Aluminum Copper Stainless steel Carbon steel  

We are an eminent Manufacturer and Supplier of Steam Heating Coils. The Steam Heating Coils offered by us are manufactured in compliance with set industrial norms. Strict quality-tests ensure that only defect-free Coils reach the buyers.  In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Heating Coils in our state-of-the-art warehouse. One can obtain the quality approved Coils at market-leading rates from us.

• Material: Cast Iron
• Type: IBR/Non IBR
• Country of Origin: Made in India
• Usage/Application: Industrial Purpose 
• Boiler Type: Water Tube

ZECO manufactures all types of coils with 12" and 38" tube for commercial and industrial applications. These include water, steam, evaporator, condenser & custom coils. Our capacities extend past normal – 60,000 Sq. ft. of coils per month. Very few can compete with ZECO in areas of quality, response time and value.