System Controller Dealers (95 products available)

• Type: Fully automatic
• Frequency: 50 - 60 Hz
• Voltage: 230 V
• Sensor: UV , IR or Flame
• Volt Ampere: 3.5 VA
• Application: Furnace and Heat Treatment

Get in touch with us for acquiring qualitative and cost efficient Burner Control System! Our company has a well-maintained data system that is absolutely secured and you can rely on that if you are willing to make payments online. With leading technologies, we make secured database to keep a stern check on the previous transactions.

Variable speed Pump Control unit for HVAC System. Wilo-Mather and Platt Pumps Limited, VR HVAC Controller is specially designed for automatic control of pumps in heating, ventilation and air conditioning applications. The VR HVAC controller is used along with variable frequency drives and differential  transmitter to control the differential pressure in a system as a function of the load. VR HAVC controller offers a simplified control and ease of operation. The VR HVAC Controller operates the pumps to meet the changing system demand received by the sensors by varying the speed of the pumps to meet the system requirements and resulting in energy saving operation. Application HVAC Controller Special features / product benefits Encl with or without provision for VFD Communication ports to receive data from Variable frequency drive Technical data Wall Mounted/Floor Mounted Enclosure. Internal Circuit breaker with door interlock. System can control 1-4 pumps max. Automatic pump alteration. Duty and standby selection of the pump. Microprocessor based pump logic controller with built in PID Control Modes Delta PC and Delta PV Embedded logic to prevent pump hunting, pump flow surges and motor overheating LCD with Back-lit Display On screen menu driven functions with rotary switch Emergency operation mode Password protection for security Alarm and fault data login Common failure and operation relays Remote start/stop mode Analogue inputs for Remote set point Each Pump operational data Size (in mm) : 500 h x 500 w x 250 d Approximate Weight : 30Kgs

We are offering engine controller. - engine pump controller - rpm measurment - 3 analog input, 3 binary input , 5 binary output - engine protections - measurment of oil pressure, temperature, level

• Input Value: 999 mv to 4 ma & 1000 mv to 20 ma
• Digit Display Size: Single Display
• PH mode: 0. 00 ph - 4 ma & 14. 00 ph - 20 ma
• Resolution: 0. 01 ph
• Range: pH:0.00-14.00 temp 0.0
• Transmitter: 4 - 20 mA Isolated

We are Gujarat; India based Manufacturer & Exporter of pH Control Systems that are the perfect outcome of premium raw material and innovative manufacturing techniques. Available with us in different grades and specifications, our systems have no match in the market. Apart from this, we can easily furnish tailored requirements of the buyers within the given frame of time. Buyers are free to place orders, safe and timely deliveries will be at the right place. Details Normally ph value is from 1 -14 Soil pH mainly direct effect on plant growth and life, It affects availability of all plant nutrients. pH below 7 is Acidic and Ph above 7 is Alkline pH lower 7 is best liquid solution for ph control

We are offering level control system for steam boiler. 'auto serve' floatless level control system for steam boiler we are pleased to introduce 'auto serve' floatless level control system for steam boiler. it is a solid state floatless system that is an outcome of our ceaseless and painstaking efforts. The control system is finding extensive application in process industries. Reliable system for maintenance of level in boiler or any other pressure vessel is very essential. If proper level is not maintained, it can be prove dangerous. Equipment̢۪s can be damaged and even before you realize it, your plant production can come to standstill, leaving behind an expensive plant shutdown. Main reason for most of the accidents is lack of maintenance of proper level. Prevention is better than belated cure. This is what we offer you. 'auto serve' provides highly reliable fully automatic control system for feed water management. It incorporates no float or any other moving parts. The result-high reliability, compact dimensions and totally maintenance free operation. It makes the feed water control completely automatic and safe, and thereby uncertainty is reduced to zero. the control system is so designed that it can be installed with extreme ease and no alteration or changes in the existing design are necessary. the special feature of the auto serve control system is this that it is equipped with low level safety alarm facility. Hence you can be sure that whenever there will be dangerous low level due to failure of pump, non return valve etc.it will immediately cut off the firing and give the alarm.

We are supplier of Door Access Controller. Since the day of our inception, we are engaged in supplying Door Access Controller and offering the same at competitive rates. We work with an aim of fulfilling variegated requirements of the clients. And, for this, we have developed a large facility wherein we keep our products.

COSEC door controllers are the front-end terminals that people use during entry and exit. Door controllers read biometric credentials - fingerprint and palm vein or RFID cards to log each entryexit and control door locking. Door controllers are connected with the COSEC or site controller. These automatic door controllers can monitor and control additional readers, doors, and auxiliary input and output ports. They store all user access information and send entry-exit details to the COSEC in real-time.

Allen Bradley PLC Along with 20 Digital Inputs & 12 Digital Outputs Product Description The Allen-Bradley® MicroLogix™ 1400 from Rockwell Automation complements the existing MicroLogix family of small programmable logic controllers. MicroLogix 1400 combines the features you demand from MicroLogix 1100, such as EtherNetIP, online editing, and a built-in LCD, plus provides you with enhanced features, such as: higher IO count, faster High Speed CounterPTO and enhanced network capabilities Take advantage of the built-in LCD with back lighting to set the Ethernet network confi guration, display fl oating point values on a user confi gurable display, display OEM logos at startup and read or write any binary, integer and long fi le elements in the data table. Three embedded communication ports provide you with excellent communications capabilities. MicroLogix 1400 off ers an isolated RS232C RS485 combination port; a non-isolated RS232C port; and an RJ-45 port for 10100 Mbps EtherNetIP peer-to-peer messaging, DNP3 over IP and Modbus TCPIP protocol. Similar to the rest of the MicroLogix family, MicroLogix 1400 is programmed with RSLogix 500 programming software (Version 8.1 and above) as well as RSLogix Micro programming software.

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Application: Process Automation
• Feature: Rust Proof
• Voltage: 110V
• Power: 1-3kw
• Power Source: Electric
• Warranty: 1year
• Size: 4 inch
• Product: 7 type
• Brand Name: SGEI
• Manufacturer Series: Types of Feeders 10 Output Relay Type Batch Controllers
• Output Type: Digital
• Display Type: LED
• Usage/Application: Automation

With the modular test system HMT 1000, oil separators (e.g. for the separation of blow-by aerosols in internal combustion engines or for the separation of oil mist downstream of compressors) can be quickly and accurately characterized and, in particular, tested under practically relevant, isothermal conditions up to 120 °C. Quality assurance and the development of filtersseparatorstraps should preferably be performed under test conditions that are relevant to the actual conditions encountered in practice. For this reason, oil separators must be tested at high temperatures of up to 120 °C and, depending on the type of application, at high pressures.

The digital control systems are going populartoday because of readily available inexpensivemicrocomputers and peripheral devices. Adigital controller has versatility to change ormodify its control function by changing ormodifying its program instructions (in analogcontrollers it is modified by changing itshardware). In other words digital controller hasdistinct advantage over analog that it can bemodified by software only where in analogworld it is hardware only.  

• Brand Name: Rosslare
• Production Capacity: 100
• Communication: TCP/IP, OSDP, G-bus*
• Transaction Storage: Up to 500,000 entries

• Shape: Rectangular
• Application: Machining Equipments
• Voltage: 220V
• Power: 1000W
• Power Source: Electric
• Feature: Durable, Flameproof, Moisture Proof
• Warranty: 1year

To cater to the ever changing demands of advanced production technologies, Our company presents optimally functioning CNC Control Systems. Incorporated with the latest software and components, our entire range of CNC Control Systems is highly reliable, organized and high performance. We provide CNC Control Systems in varied configurations to perform complex fabrication operations without break. Buyers can purchase CNC Control Systems from us at competitive prices. We can make them available in bulk and guarantee scheduled delivery.   Details : Servo Drives & Servo Motors Power Supplies, Plc Modules & Reactors Encoder –sensors, Power Cables & Sensor Cables I/O Modules , Interfacing Modules  & Connectors Conrol Transformers & Water Proof Panel Lights Rettrofittings  & Reconditining CNC System Softwares , Comm. Cables & Amcs

The Curtis Vehicle Controller, Model 1310, is a single-point "Master" control of multiple vehicle functions which can be applied to electric vehicles, non-electric vehicles and stationary control systems. Model 1310 works in conjunction with Curtis CAN-based motor controllers and other CAN-open devices.

We offer Digital COntrol Syste usefull for control laboratory experiment. In the present unit a second order transfer function, simulated with operational amplifiers and passive components, has been chosen as the process to be controlled. This results in a well behaved and near perfect linear process which gives a highly predictable performance. The digital controller consists of a 8085 based microprocessor kit with analog-to-digital and digital-to-analog interface. Software supplied with the system resides in a 8K EPROM. This consists of P, PI and PID algorithms in which the three gains may be selected out of 16 levels each. Further, the user may write his own programs to implement additional algorithms and study their responses. Highlights of the equipment: Digital Controller implementation on mP-kit Simple Op-amp based analog plant CRO display of response Design and test new algorithms Experiment: Identification of the controlled process Study of sampling period variation Designing P, PI, PD and PID controllers Advanced algorithms implementation Features and Specifications: Second order simulated process (analog process) Built-in D/A and A/D circuits (8-bit) 8085 based mP kit as digital controller with user software in 8K EPROM 16-bit arithmetic for algorithmic calculations. Square wave test input (internal) 16 built-in levels of P, I and D gains each. Complete flexibility for the user to develop own software IC regulated internal built-in power supplies Detailed literature and patch cords included Essential accessory - a CRO The experiment is complete in all respect.

• Application: Industrial
• Color: Gray
• Power: 2 kW
• Frequency: 50 Hz
• Voltage: 240 V
• Operation Mode: Automatic

• Brand Name: TAGLab

We are offering proportional control system,. Proportional action on different actuated error signals generated externally control of proportional rate & study of its effect on the controlled signal electronic simulation.

Swiss-made viscosity measurement and temperature control systems for water and solvent based inks. The values of various parameters are measured direcly in the ink supply line of the printing unit. This viscosity controller works on the dropping body measurement principle. The Fasnacht viscosity controler also has an efficient cleaning system, which ensures that the measuring unit and supply line can be cleaned automatically. The purchase decisions of the modern-day FMCG consumer is dependant largely on the print quality of the packaging material. Uneven colour shades on the printed substrate is a commonly occurring phenomenon, resulting in low quality printed material - which might influence a buyer negatively. Ink viscosity plays a vital role in ensuring uniform colour shades across the printing substrate. Consistent printing and optimum use of ink and solvents can be realised only with stable viscosity.

• Product Name: 7.5 Inch Touch Screen Controller BM-PA7IN with Build-in Software for BM-09T, BM-09TCY, BM-12T, BM-12TCY...etc.
• Application: Metal marking machine touch screen controller, make the machine no need computer.
• Function: Used for metal printing machine.
• Item number: BM-PA7IN
• Working type: Full automatic
• Working machine type: Desktop, Bench top
• CNC or Not: Yes
• Graphic Format Supported: DWG, PLT, SLG, WMF, EMF, AI
• Computer: No need.
• Product description: 7.5 Inch touch controller BM-PA7IN for metal marking machine, build-in software. No need computer.

• Processor: 32-bit
• Brand Name: HIKVISION
• Usage: Network Controller

Dhumal'sPlatinum Plus and Junior Poultry House Controllersare a modular system which manages all aspects of a poultry house: climate, temperature, feed, weighing and ventilation. Designed for operations requiring a large number of relays, the Platinum provides a plug-and-play solution for growers wanting to invest minimal time in programming thecontroller. Alternatively, growers wanting to configure the controller to fit exactly their particular installation can set every detail. Platinum Plus and Junior Controllers feature Rotem’sPrecision Ventilation technology, an innovative technology that has revolutionized poultry house ventilation worldwide. Precision Ventilation features Dynamic Cruise Control, which automatically adjusts the ventilation system according to the changes in temperature, humidity and static pressure. The system takes into considerationthe wind chill factor, fan air capacity, minimum required ventilation according to bird weight, and the temperature differential between the two ends of the house. In doing so the Platinum provides: Optimal target temperature, humidity and CO2, Optimal air conditioning; reduced humidity & ammonia levels, Reduced heating & ventilation costs   User Friendly : Using a Platinum Plus/Junior is simple. The units feature a large LCD graphic display, and on-screen help and graphs. A Windows-based software package can be installed on any PC, enabling remote monitoring and control over the unit.     Platinum Plus/Junior Features : 16 independent heat zones Precise fogging and cooling systems Feed management with integrated overflow alarm and shutoff Current sensor for monitoring power consumption Low water pressure alarm Up to 80 heavy-duty relays Fail safe emergency relay Static pressure control Detailed alarm and event log Modular system to meet specific requirements Complete remote communication with real-time visual outlook Large LCD graphic display On-screen help and graphs Data plug for easy data transfer Large & friendly numeric keypad Smart On/Off/Auto override switches Battery backup option (12 V) SD card port to save history & update software   Functionality : A Platinum Plus/Junior provides the grower with a large variety of functionality: Digital inputs provide data on the feed count , water meter, feeder overtime, auxiliary alarm. 0 to 10 volt analog outputs enable control over light dimmers and variable speed fans. Growers wanting to control their feeding operations as well as collect the data needed to properly analyze their operations can connect the controller to bird, feed and silo scales. Full control via a PC (both locally and remotely) is possible by installing a communication card and by connecting the Controller to aRotem Communicator. An optional digital input/analog output combo card frees a card slot, thereby enabling even more functionality.

AUTOMATIC DOOR CONTROLLER – OVERVIEW COSEC door controllers are the front-end terminals that people use during entry and exit. Door controllers read biometric credentials - fingerprint and palm vein or RFID cards to log each entry/exit and control door locking. Door controllers are connected with the COSEC or site controller. These automatic door controllers can monitor and control additional readers, doors, and auxiliary input and output ports. They store all user access information and send entry-exit details to the COSEC in real-time. Featuring Ethernet, Wi-Fi, and 3G/4G connectivity, COSEC door controllers offer extra flexibility in designing a security solution while reducing installation and maintenance costs. These advanced door controllers have multi-functional supervised auxiliary input and output ports to control various applications. Input devices such as motion detectors, fire alarm panels, video surveillance, etc. and external devices like video recorders, siren, etc. can be connected to these ports. Modules such as Time-Attendance, Access Control, Cafeteria Management, Visitor Management, Visitor Management, Contract Workers Management and Field Visit Management are supported by these door controllers. Hence, COSEC door controllers are futuristic and versatile devices designed for reliability, modularity, and high performance.

• Main Board Size: 218x130x23mm
• Time Zone: 16 & each group can choose different verification methods.
• Card Reader: 8
• Alarm Output: 1
• Alarm Input: 1
• Fire Alarm Output: 1
• Fire Alarm Input: 1
• Release Button: 4
• Door Sensor: 4
• Lock Output: 4
• Brand Name: Secureye

AC HOME LIGHTINING SYSTEM CONTROLLER Precimec range of Ac HLS is the most advanced Off grid series of Pv inverter in the market today combining latest technology with very high reliabilty. Our range of solar PCU are user frendly and have all the lastest features with user frendly programable settings various functional parameters to optimise for the for best performace. and utilisation of solar Pv. By using our product you are assured about getting the best efficiency in Pv conversion to load and trouble free performance due to its rugged industrial design and construction.  KEY FEATURES:»   True Sine wave inverter. »   No load trip and auto restart after load is connected. »   Very low no load current, ensures extended backup in stand alone applications. »   MULTI FUNCTION LCD: Displays key parameters about Voltage, Current (PV), Battery Voltage, Charge status in %, Charging & discharging current,        Output Voltage, Frequency, Current (Load).  MPPT CHARGER FOR SOLAR: Maximum power point tracking solar charger with Perturb and observe algorithm with current display and 3 stage charging for         optimal battery charging and extended battery life.»   AUTO TIMER: Inverter can be programmed to Turn N and OFF at a preset time with an in built RTC, this feature is used to optimize solar energy backup. »   OVER LOAD RESTART: Unit will restart 5times under overload condition in -backup mode, there by avoiding the need for overload restart. Will continue to work        normally when the over load is removed. »   LED VISUAL INDICATORS: PV Charging ON, Battery FULL, Battery LOW. TECHNICAL SPECIFICATIONS:  • Input Voltage – 12V  • Output power rating 100VA, 0.8 PF • Output power – 1 phase, 240 V AC • Output voltage regulation < 3% @ 50% load • Output frequency – 50 Hz +/- 0.5 Hz • Efficiency >= 85% @ 60% load • Voltage THD