Tissue Culture Rack Dealers

Hot Air Oven, Tissue Processor, Senior Rotary Microtom

INTRODUCTION: “NOVA” TISSUE CULTURE RACK is specifically designed to cater the needs of Tissue culture laboratory, Botanical laboratory, Plant physiology etc.   TECHNICAL SPECIFICATION: Dimension : 7 x 3 x 1.75 Feet. No. of Shelves 6 with each contain 2 tube lights attached. U. V. light facility. Photoperiodic timer. Castor wheel for easy of transport. All chocks are outside the rack. Mild Steel Angle Structure duly powder coated. Supplied with Programmable Timer. Required tube lights will be supplied with the unit.

Made with heavy gauge MS tubular pipe with thick gauge MS frame duly powder coated OR Tubular Aluminium Pipe with Aluminum frame having rack size of 48'' X 21''. Height between each rack is 15''. Each rack is fitted with two nos of fluorescent tube and one U.V Germicidal tube. Each tube has separate ONOFF switch. 0-24 hours weekly Cyclic Timer also equipped with the unit for illumination purpose [for controlling all the fluorescent tubes inside the racks]. Electronic chokes are fitted on a separate side control panel box. Complete with 15 Amps cord wire plug to work on 230 VAC.

carrying Tissue Culture and allied work. Parameters of Temperature, Relative Humidity and Photoperiodic simulation are controlled with State of the Art Microprocessor based controllers for each parameters. Depending on the nature of work, exposure of outside heat emission,light load and human heat load insulation of walls ceilings and floor are insulated keeping in mind the temperature to be achieved by using specially designed Commercial Air-conditioning units using SST. Parameters are controlled through BBPL designed Biotech Controllers and Data Acquisition systems. Temperature range 20°C to 28°C ±2°C and Light through PAR ( Photosynthetically Active Radiation) Lamps. Tissue Culture Castor Racks are used for better mobility, working space and sensitive experimentation. Tissue Culture Labs Room conversions can be constructed as per specific user designs and requirements.

Excel Salient Features: • Material of Construction: CR Powder Coated.• Completely S.S also available.• Illumination: Depending to suit customers requirement & size, 4 No.’s to 5 No.’s or above than this also available to suit user’s requirement.• Separated control panel.   Available Sizes:  

We have designed and developed a unique range of tissue culture racks that increases the incubator capacity. The unique design of the racks prevent the of flasks tipping one over the other. These racks have grips on both the ends that make handling easy and allow for safe transport of flasks to the incubator.tissue culture rack are very useful for various types of tissue culture plants and other tissue culture work in tissue culture room.

Offered by us is tissue culture caster rack that is high on demand in the markets. Superior quality, durability, minimal maintenance and sturdy construction are synonyms to the range of tissue culture caster rack provided by us. Furthermore, this tissue culture caster rack is made available to the customers at highly competitive prices. specifications : 16 x 40 watt tube lights with electronics ballast choke for producing best simulated natural lights 16 x 15 watt incandescent lampfour working shelves illuminated by 4 x 40/ 36 watt tubes & 4 x 15 watt bulbsshelf base : 3 mm thick polymerrack height : 5.5 feet breadth : 4 feetinput 220 vac single phaseframe : mild steel 2.5 x 2.5 cmfitted with caster for easy movementself to self distance : 14 inches used for : biotechnology worktissue culture

Features:   Made out of CRC MS Pipe frame. Distance between shelves to shelves is 16”. Size of each shelf is 48” x 18”. Platform surface will be of 3mm thick Hylem. Four 40-watt fluorescent light (With Electronic Ballast). Minimum heating effect/heat dissipation. No Flickering effect. Increase lux intensity/radiation in the spectrum. Energy saver with individual switching arrangement in each shelf. Total 16 Electronic Ballast/Simulator. 4x25 Watt incandescent lamps in each shelf with switching arrangement. Frame with MS square pipe 1” X 1” With Anticorrosive, Humidity Resistant Powder Coating finish culture rack. Wheel/Castor-4No.s for each trolley. Provision for connecting the Trolley to photoperiodic Timer/Controller output. Input 200-240 V AC, 50Hz, Single phase, ambient 5°C to 50°sC, RH upto 95%.

We bring for our customers tissue culture rack of superior quality which is available in a wide range of options depending on the number of shelves. The tissue culture rack is provided in ranges of units with four shelves with lighting facility in 3 shelves, unit of five shelves with lighting facility in 4 shelves, unit of six shelves with lighting facility in 5 shelves. The tissue culture rack also saves energy due to individual switching arrangements in each shelf. features distance between shelves is 16 shelf size 48 x 18 zero flickering effectminimum heating effect or heat dissipationfour 40-watt fluorescent light equipped with electronic ballasttrolley has wheels construction constructed with thick square ms pipe frame 3mm thick platform surface 16 electronic ballasts or simulators four 25 watt incandescent lamps in each shelf frame of ms square pipe 1 x 1 humidity resistant, anticorrosive, powder coating finish culture rackprovision to connect trolley to photoperiodic timer or controller outputinput 200-240 v ac, 50hz, single phaseambient temperature 5oc to 5oc, rh upto 95%

This Tissue Culture rack is made of MS / Aluminium pipes beautifully powder coated racks size 120 cm x 53 cm covered with unbreakable flexi glass. Distance between each rack is 38 cm. Each racks is fitted with 4 fluorescent tubes, 4 bulbs and one U.V. germicidal lights. Electronic Chokes are fitted on a separate wooden plank fitted with caster wheels at its base. Exhaust fan is fitted to the box to throw out the heat generated by the chokes.

We are a trusted name when it comes to the high quality Tissue Culture Rack. The Tissue Culture Racks designed by us have perfect finish and long service life. We make sure they have sturdy construction, are easy to maintain and have resistance against corrosion. They are suitable for various uses in tissue culture rooms and plants. Clients can get in touch with us for affordable prices.   No of Racks : Unit of four racks Unit of five racks Unit of six racks

Made of heavy duty Mild Steel pipe and powder coated each shelf size 1200 x 400mm and distance between each shelf is 400mm top of shelf shall be made of nylon sheet. Each shelf is fitted with 4 nos. 40 watts fluorescent light. Nylon wheels provided for easy movement without any scratch on the floor with Photoporiodic time and 3, 4 and 5 U V light in each unit.                                                        No.of Shelves                                                                  4                                                                  5                                                                  6