Toc Analyzer Dealers (33 products available)

the toc-l series of toc analyzers adopts the 680°c combustion catalytic oxidation method, which was developed by shimadzu and is now used worldwide. while providing an ultra wide range of 4 μg/l to 30,000 mg/l, these analyzers boast a detection limit of 4 μg/l through coordination with ndir. this is the highest level of detection sensitivity available with the combustion catalytic oxidation method. in addition, the combustion catalytic oxidation method makes it possible to efficiently oxidize not only easily-decomposed, low-molecular-weight organic compounds, but also hard-to-decompose insoluble and macromolecular organic compounds. capable of tc, ic, toc (= tc-ic), and npoc measurement; options enable poc (volatile organic carbon), toc via poc + npoc, and even tn (total nitrogen) measurements the blank check function evaluates system blanks by measuring ultrapure water processed automatically within the instrument the automatic dilution function enables measurements up to 30,000 mg/l

Total Organic Carbon Analyzers OI Analytical has been a leader in designing and manufacturing TOC Analyzers since 1970.

Toc (total organic carbon), which directly shows the total organic content is regarded as a key factor to evaluate the pollution potential of organic compound in water. After 3 years research and development, atl successfully launch our new product: atl patent laws, our toc can meet requirements for application in water analysis, environment monitoring, pharmaceutical production, quality control, processing control, etc. So far atl launch 2 models toc-2000 (catalytic combustion oxidation) and toc-3000 (wet chemical oxidation by uv ) which are widely used for quality control of drinking water, industrial water, sewage and waste water, meanwhile, it has wide application in monitoring of river, lake, sea and surface water.

• Accuracy: ± 3%
• Precision: RSD ≤ 1.5%

OverviewGE Analytical Instruments designed the Sievers InnovOx Total Organic Carbon (TOC) Analyzers to provide industry-leading sample handling robustness and instrument uptime for process, environmental, and wastewater organic carbon analysis. Available in bothLaboratory and On-Line models, the InnovOx uses aninnovative Supercritical Water Oxidation technique that offers enhanced eliability, greater ease of use, and lower maintenance than typical combustion or UV persulfate TOC analyzers.

• Range: 0-10 ppm through 0-1,000 ppm

On-Line TCTOC, Pumpless, Reagent Saver Package, 2 Alarm Levels 1 Master Fault Alarm, Stainless Steel Enclosure, Low Maintenance

Get more from your analysis with the Aurora 1030C TOC Analyzer, an instrument designed to process aqueous samples for the analysis of total organic carbon (TOC) using the high temperature combustion technique. Capable of processing up to 300 samples daily, the Aurora 1030C offers a broad sample scope of 100 ppb to 30,000 ppm. In its mission to process aqueous samples for the analysis of TOC, total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC), the Aurora 1030C has been known to reduce maintenance costs. Built with a patented dual chamber combustion reactor for employing the high temperature combustion technique, the 1030C's first reactor chamber contains a bed of quartz to protect the platinum catalyst in the second chamber from deposition of noncombustible constituents, and ensures consistent oxidation conditions for stable blanks. As a result, this reactor design extends catalyst life and reduces instrument maintenance costs.

• Oxidation process: Photo catalytic Oxidation by TiO2
• CO2 Detection: NDIR
• Analysis Option: TC, TOC, IC
• TOC Measuring range: 10-5000 mg/L
• Analysis Time: 30 minute
• Injection Volume: 10 ml to 3 ml
• Precision: +/- 1% of full scale
• Communication: RS232
• Operating Voltage: 230 V
• Dimensions: 520 x 310 x 345 mm.
• Weight: 17Kg

spectro::lyser™ UV-Vis monitors depending on the application an individual selection of TSS, turbidity, NO3-N, COD, BOD, TOC, TSS, color, O3, H2S, AOx. NOx fingerprints and spectral-alarms, temperature and pressure s::can plug & measure measuring principle: UV-Vis spectrometry over the total range (200-720 nm or 200-390 nm) multiparameter probe with adjustable open path length. ideal for surface water, ground water, drinking water and waste water. long term stable and maintenance free in operation. factory precalibrated, local multi-point calibration possible. automatic cleaning with compressed air. mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station). operation via s::can terminals & s::can software. recomended by and complient with public authorities and international agencies such as Chinese EPA, US EPA and CPCB

• Application: Laboratory Use
• Brand Name: METTLER TOLEDO
• Color: Multi
• Usage/Application: Lab Analysis
• Reduce sampling time: 75%
• Power: Electric

• Features: This analyser also has a number of sensors to ensure that the utilities are present like an alarm is raised on a failure.

As standard it has automated zero, calibration, sample and wash sequences which enable the system to run on the dirtiest of samples.

The TOC instrument uses the classical flow through concept for TOC online control. The efficient UV oxidation of organic compounds by "direct surface principle" in combination with conductivity detection guarantees the high precision of the measured values.The automized functions of qualification allow a high standard of safety and minimized operation costs in controlling pharmaceutical water.Operation control is achieved on the basis of windows XP embedded software.It is an eays to use system which brings quality control at an affordable level to your lab. The TOC is a valuable accessory for all EDI and ultra pure water systems.   Calibration Calibration can be done by the user himself. For calibration of the TOC instrument the online control mode has to be stopped and the calibration is performed.The operator has to connect the two intels with the calibration standard solution and diluting water sample. The programmable procedure of the calibration steps will be performed automatically.The statistical evaluation of the measurements and the corresponding calibration parameters will be shown on th escreen (plausibility test)

membraPure is one of the top players in the core markets of TOC measurement, amino acid analysis and ion chromatography, offering an outstanding level of technology and quality such as post column derivatization with Ninhydrin and NDIR TOC detection. The systems enable TOC analysis of different water qualities – from ultrapure water in the pharmaceutical industry and in power plants up to waste water from the production sites – we provide the right instrument for the determination of your TOC.   Products   Amino Acid Analyser TOC Analyser

Dissolved carbon and nitrogen isotope analysis on the highest level Unique applications for IRMS analysis of TOC and TNb 100% C and N recovery independent from sample type and matrix From trace to high concentration, from fresh to briny samples Matrices ranging from dilute glacial meltwaters to aggressive soil extracts Superior ease of use through sophisticated self-diagnosis more

Now Measure 3 Streams of water Online with one single instrument. TOC Analysers are used in diverse fields, including the management of tap water, effluent, and ultra pure water, management of pharmaceutical water used in drug manufacturing processes, evaluation of cleaning efficiency (cleaning validation), and environmental investigations of river water and soils water

• MODEL NO: Aurora 1030W

The Aurora 1030W TOC Analyzer processes aqueous samples for analysis of the total organic carbon (TOC), total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC) content of the samples. Using heated persulfate oxidation technology, samples containing 2 ppb to 30,000 ppm of organic carbon can be analyzed. The Aurora 1030W supports USEPA-approved methods, Standard Methods, ASTM, DINISOCEN, USP, and EU Methods. Depending upon the protocol employed, up to 300 samples per 24-hour period can be analyzed, and in excess of 100,000 samples per year.

• high temperature: 950 °C

This space-saving TOCTNb analyzer with particular strengths in environmental analysis is also highly popular in the academic field and pharmaceutical vaccine analysis. The high temperature combustion device multi NC® 21002100S is equipped with a perfect injection technology for samples containing particles or oil. With its integrated autosampler and septum-free injection technology it is a compact and robust routine analyzer.

Toc Analyzer, TURBIDITY METER, Portable Water Analysis Laboratory

toc analyzers, Ahuja Microphone, weighing balances, Weighbridges

• Features: In addition it has a sleep mode, this can be controlled either by a programmed time basis or by using a float switch or similar device, when activated the analyser system goes to standby mode saving on chemical usage. Etc

The FM TOC 101 is a single stream analyser which is fully automated and it has many unique features making this instrument exceptionally versatile but amazingly is still very competitively priced. As standard it has automated zero, calibration, sample and wash sequences which enable the system to run on the dirtiest of samples.

We deals in manufacturing, supplying and exporting of wide range of TOC Analyzer.

Laboratory TOC Analyzer

toc analyser, lab glassware, Refractometer

Toc Analyzer, Laser Dust Monitor, Continuous Black Carbon Analyzer

toc analyser, Metal Screw Closure, Air Sampling Pump

Toc Analyzer, chlorine analyzer, Turbidity Analyzer, Silica Analyzer

TOC COD Analyzer, Air Capture Hood, VOC Gas Analyzer

toc analyser

Online TOC Analyzer, total organic carbon analyzer, dust monitor