Under Crank Shearing Machine Dealers (93 products available)

  This is a power operated under crank type guillotine shearing machine featuring all steel body solid construction for accuracy and dependability. The crankshaft runs in gun metal bushes and fly wheel shaft runs in ball bearings for smooth trouble free operation. It is supplied complete with four edge HCHC shearing blades, electric motor, hand operated back gauge, front gauge, side gauge, belts, guards and shot lubricator. It is available in various sizes from 1250 x 4 mm to 3125 x 5 mm cutting capacity in mild steel with T.S. 42 kg/sq. cms.

We have in store for our clients a wide range of Mechanical Under Crank Shearing Machines. The high-grade raw material is sourced from the authentic vendors of the market to manufacture these machines in compliance with the set industry standards. The Mechanical Under Crank Shearing Machines are offered in various technical specifications to meet the variegated demands of our customers.

KNTM Brand Pneumatic Shears fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.    FRAME CONSTRUCTION Pneumatic Under Crank Shearing machine Frame fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.   BED Super strong bed of closed box type construction, Street relieved in a furnace, forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed area also provided for machined pas across the bed for convenient setting of front gauge brackets any desired spacing. Depressions in the top at the bed provide ample clearance for fingers in handling sheets narrower than the bed.   UPPER BEAM Ram is also of solid steel plates, carrying the upper knife. Its minimum weight ensure lesser load on the bearings, The upper beam moves in flat heat treated steel guide plates to avoid plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.   HOLD-DOWN MECHANISM Solid clamping by powerful spring loads hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of versions in thickness. Hold down pressure in easily adjustable for clamping soft material. Different thickness of material can be cut without future adjustment with consistently accurate and burr free results.   ROLLING KEY CLUTCH Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.   SHEAR KNIVES Knives are manufactured strictly as per standard material of D2 HCHCr. Every step from designing metallurgical specifications, heat treatment, grinding and inspection is carefully controlled. The blades are standards are standardized and are easily replaced.   ACCURATE GAUGING The Rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.   LUBRICATION Single shot lubricator provides oil to all the lubrication points, when necessary. Thus, all bearing parts and guide surface etc.   DRIVE Drive through V-belts on flywheel and reduction gears are made of steel, hob cut for the smooth running and longer life.

Rigid Steel Frame of Kishan shears are optimally designed to avoid weak sections and is of interlocked design. The Ram is guided throughout its length by accurate machined guide ways ensuing proper clearance and clean out.Revolvig Key Cluth Iinked with the Main Gear engages every time when Fool Pedal Is pressed. Drive provided through V-Belt & all journals are fitted in Gun Metal Beanngs. Brake is adjustable and incorporated on end of Crack Shaft.

Country of Origin : India

Type : Under Crank Shearing Machine

Weight : 1000-2000kg

Condition : New

Automatic Grade : Semi Automatic

Driven Type : Elecric

Color : Grey

Brand Name : JCP

Warranty : 1 YEAR

  The Frame is fabricated from steel plates of is 226 Grade. The frame is designed to take heavy loads. The interlocked design put the direct support to frame. Thus frame is strain free and eliminates welds at load supports. Thus the Accuracy of The Machine is never disturbed. Table Steel fabricated, box type table is heavily ribbed for strength and is stress relieved its machined seat provides true and firm support to the bottom blade. It is adjustably for setting the blade clearance. The top surface of the table is provided with T slots for adjusting the front gurge. Upper Beam Upper beam is fabricated with thick M.S. Plate. It is Heavily ribbed from behind and is stress relived. The top blade is fitted at its accurately machined seat. Its sliding surface are machined and hand scrapped for smooth travel and sustained accurately. Guide Ways Accurately machined guide ways keep the beam in its bearing throughout the stroke. A taper wedge is provide to compensate for the wear and to facilitate quick setting of the blade clearance.   he spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request. Drive, Clutch And Brake Drive DRIVE : Motor, mounted on an adjustable platform, drives the large, cast iron fly wheel through v-belts. The power is Further transmitted to the fly wheel shaft through steel pinion and main gear box and than transmitted to main gear. Gun-Metal bushes are provided all the rotating parts . CLUTCH : Rollin key clutch is linked with the main gear and engages every time when the foot switch is pressed. BRAKE : Spring tensioned braked fitted at the end of the crank shift to damp inertia. Front And Rear Gauges FRON GAUGE : T-Slotted fron gauge fabricated from mild steel is detachable. REAR GAUGE : Rack and Pinion type rear gauge provides accuracy and is easily adjustable to parallel and taper strips efficiently. Blade Everest shears are provided with high quality single or segment HCHCR blade, with four edged. Lubrication All bearing parts and guide surfaces are lubricated through connected oil cups and operated lubrication pump. Standard Equipment's Rear gauge, Side squaring and Front gauge, Foot pedal, Switch Motor pulley, Gear & Fly wheel guards and standard. Interaction manual, and Spanner. Standard Accessories Electric Motor, Starter, V-belts, Manual Lubrication pump, Front gauge, Rare gauge with Scale and Stroke counter, Electric and lubricating pipe Fittings and waiting. Power Supply 400/440 Volts, 3 Phase, 50 Cycles. Note:- Electric items & blades are not under warranty. Machines will be supplied without electrical & V-belts.

Brand Name : TIRUPATI

Place of Origin : India

Model Number : TUS.

Supply Ability : 3 Pair/Pairs per Month

LUBRICATION : AUTOMATIC.

Port : JNPT

COLOUR : TATA BLUE.

We are offering mechanical under crank shearing machine etc. We are leading manufacturer of mechanical under crank shearing machine,please send us your requirement detail.

Certification : An ISO 9001 2008 Certified Company

Packaging Details : Depend on Clients Requirements and Order Quantity.

Model Number : TUS-1

Port : India

Place of Origin : Gujarat, India

Dimension(L*W*H) : 2150x1450x1275

Type : Under Crank Shearing Machine

Weight : 100-1000kg

Voltage : 380V, 220V

Automatic Grade : Fully Automatic, Automatic

Driven Type : Elecric

Warranty : 1year

Our zeal to achieve excellence enables us to design and develop efficient Under Crank Shearing Machine. Our Under Crank Shearing Machine is quality tested and promises remarkable workability at low operational cost. Configured with advanced technology, Under Crank Shearing Machine boosts productivity of shearing in any heavy metal industry. Highlights Robust construction Smooth working Efficient design Longer service life Details Frame : Rigid steel frame of Shubham Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by accurate machined guide ways ensuring proper clearance and clean cut. Hold � Down System : Spring loaded mechanical hold down pads hold the sheet security, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request. Knives : Shubham Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged. Lubrication : All bearing parts and guide surfaces are lubricated through hand-operated lubrication system. Mechanical Back Guage : This is a standard equipment provided on all Shubham Shears. Scale on the back guage gives instantaneous reading of distance between shear and back guage. Thus avoiding errors and maintenance encountered in electronic equipment. Finger Guard : Fitted in front of hold-down for operator protection without obstructing viewing. Features Foot Pedal. Fly Wheel & Gear Guard. Self Lubrication System Motor Pully A Pair of Four Edge Sher Blade Standard Front Guage Back Guage (Manual Operated) Options Motorised Back Guage. Automatic Lubrication System. Vee-Belts. Electric Motor & Starter / Control Panal Board. Squaring Guage System. Stroke Counter. Extension Squaring Arm. Hydraulic Holddown Pads (Cam-Pump). All Dimensions are in mm. Power Supply 400/440 volts, 3 Phase, 50 Cycle. As day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice. All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation

Our team professionals and experts ensure that the transactions done are exactly as per the guidelines. We maintain stern records of all the transactions done to gain complete satisfaction of our clients. We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements.   Details : Frame : The frame is of all steel construction, fabricated from Steel plates suitable Proper alignment of the frame is ensured machining of the cut steel plates before welding. one side of the shearing machine comes with One piece of steel plate structure which delivers more rigidity to your machine. Clutch : The clutch is of pin/rolling key type. the clutch is rigid and well supported. the clutch gives continuous stroke also for mass production and it comes in Magnetic valve with electrical foot pedal for smooth control over the stroke releasing systems. Crank Shaft : Crank shaft is made of special alloy steel machines to close accuracy and fitted in bronze bushes for perfect alignment. Flywheel : Properly sized flywheel, is made of high grade cast iron & balanced for storing and releasing adequate energy for the cutting operations. Gears : Gears are of cast steel of fabricated Gear teeth are genereted by hobbing to reduce the noise level of running machine. Table & Ram : Table and ram are made of heavy duty Steel material. Those are perfectly aligned each obtain quality cuttings. Lubrication : An efficient lubrication systems has been provided for lubricating the sliding surfaces and parts The Lubrication is achieved through hand pump and Electrical Pump also.

Country of Origin : India

Type : Under Crank Shearing Machine

Brand Name : Vishwakala

Vishwakala Mechanical Under Crank Shearing Machine Ranging from 300 mm to 3125 mm Sheet Width Cutting Capacity 0.5 mm to 2 mm Steel Body, Steel Geared, HCHCR Blade, Manual Back Gauge, Spring Loaded Pressure Plate

Certification : CE Certified

Weight : 100-1000kg

Voltage : 400/440 volts

Warranty : 1year

Power : 3 phase

We are one of the leading Under Crank Shearing Machine which is a statement in itself, these are designed through structural analysis technique which ensures scratch free production, high accuracy and repeatability. Interlock Shearing Machine which we manufacture are the most trusted and reliable machines in the market. Being one of the prime Shearing Machine Supplier in India we know that quality assurance and customer satisfaction is a key to success for any business to grow and succeed. Features Foot pedal Fly wheel and gear guard Self lubrication system Motor pulley Details All dimensions are in mm Power supply 400/440 volts, 3 phase, 50 cycles We reserve the rights to alter specifications without notice Undergo stringent quality checks for easy and smooth operation Options Motorized black gauge Automatic lubrication system V belts

Country of Origin : India

Type : Shearing Machines

Certification : ISO 9001:2008

Weight : 2000-4000kg

Color : BLUE & WHITE

Condition : New

Automatic Grade : Automatic

Driven Type : Pneumatic

For making sure about the safety of the products during handling,transporting and warehousing, we make use of quality packaging material. And, this task is accomplished by our deft professionals. As a promising name, we bring forth high quality product range that is designed and developed using the best in class raw material and modern work methodologies. Besides, we make sure that the basic material is sourced from the trusted places.Specifications Balaji power operated guillotine shearing machine are sturdily constructed and are designed for accuracy and dependability. Side Frames;- are of solid steel plates designed for maximum rigidity to eliminate deflection and to withstand continuous high speed performance at full capacity Bed Or Table;- is of closed box type construction, which forms a rigid backbone for the shear and a solid backing for the lower knife. additional ribs under the table adds to its strength Cutter Beam;- the ram is of solid steel plates, accurately machined. the ram brace is bolted to the ram to adjust the camber which may result after long use. the ram moves in a taper guides. this facility easy adjustment of clearance between ram & table, for cutting various thickness.  Blades ;- four edged HCHC blades are provided  Rolling Key Clutch ;- made of alloy steel for positive engagement and continuous operation, having three key way in the EN-8 insert  Brake:- constant spring loaded adjustment brake is provided.  Gauges:- rigid and accurate construction of back guage provides consistent widths of sheets to be cut.

HP Singh Machinery Pvt. LTD is one of the leading expertises in manufacturing and exporting Mechanical Under Crank Shearing Machine. We provide these machines in the market at very economical price. Shearing are available in Capacities (size) of 4 feet 5 6 8 10 12 feet & 13 feet length thickness of machine is 0.100 mm up to 4 mm capacities, rolling key clutch, spring loaded mechanical hold down pads, increased productivity & reliability.

Application : Structural Analysis

Weight : 100-1000kg

Voltage : 220V

Automatic Grade : Automatic

Power : 3-6kw

Warranty : 1year

Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries. We have a team of quality inspectors who check the entire lot of raw material on several counts, prior to procurement. Thus, quality of the finished products is never fortified.

Power supply : 400/440 volts, 3 phase, 50 cycles

we are one of the leading under crank shearing machine which is a statement in itself, these are designed through structural analysis technique which ensures scratch free production, high accuracy and repeatability. Interlock shearing machine which we manufacture are the most trusted and reliable machines in the market. Being one of the prime shearing machine supplier in india we know that quality assurance and customer satisfaction is a key to success for any business to grow and succeed.

Type : Under Crank Shearing Machine

Certification : ISO 9001:2008

Weight : 4000-6000kg

Color : Brown

Voltage : 440V

Condition : New

Rated Power : 3-6kw

Automatic Grade : Automatic

Driven Type : Elecric

Warranty : 1year

Country of Origin : India

Brand Name : Tirupati

After-Sales Service Provided : Yes

Thickness 25 mm : White colour

Type : Shearing Machine

Certification : CE Certified

Weight : 100-1000kg

Color : Multi Colour

Voltage : 220V

Rated Power : 1-3kw, 3-6kw

Automatic Grade : Semi Automatic

Driven Type : Hydraulic

Warranty : 2years

The company is known as a reliable Manufacturer and Supplier of Under Crank Shearing Machines in Surat. The Under Crank Shearing Machines, offered by the company, are made using the best grade components and the quality is simply unmatched. The company offers a highly durable range of the Under Crank Shearing Machines to the clients all over the country. Salient Features Rigid and streamline construction ensures vibration-free and fatigue less function of the machine. Upper Beam/Ram is moving in C. I. Guide ways with precision bearing surface and having adjustment for compensating wear and tear. Adjustable front & back gauge with through slots which facilitates adjustment of different widths of cuts and avoids any sorts of waves and twisting of sheets while cutting. Adjustment bolts allow setting of blades to cut various thicknesses. Machines are fitted with OHNS quality Four Edge Shearing Blade to avail maximum use of blades. The extra heavy Treadle with proper weight is spring loaded and very well designed for operator�s convenience which takes minimum pressure while cutting. The springs fitted are of proper compression and strength. All lubrication points are provided with lubrication cups at required places to ensure smooth, trouble free and long life of machine. The Setting bolts are provided for lower-fixed blade to adjust vertically when height of blade is reduced after re-sharpening. Accessories Standard Accessories : One Pair Blade, Front, Back & Slide Gauge Extra Accessories : ONHS Blade in place of HCHCR Blade, Sheet Holding Device

Brand Name : NIMOGA

we are offering under crank shearing machine. pneumatic shearing machine under crank shearing machine over crank shearing machine hydraulic shearing machine pneumatic press brake machine hydraulic press brake machine mechanical press brake machine cnc hydraulic press brake cnc shearing machine heavy duty shearing machine sheet cutting machine shearing machine 2500 x 4 mm sheet shearing machine cut to lenght coil straightner mid crank shearing machine mechanical shearing machine power press

Features : High performance Easy to operate Durable

In order to provide our clients optimum satisfaction, we manufacture these Under Crank Shearing Machines in compliance with industrial standards, using high grade raw materials. These offered machines are used for the purpose of cutting several products in varied thickness. Its efficiency, sturdy construction, reasonable pricing, and long functional life makes this a product highly asked for.

Application : GENERATOR ENCLOSURES , STEEL TANKS, STAINLESS STEEL EQUIPMENT , COIL CUTTING INDUSTRIES , AIR CONDITION DUCTS , CONTAINER MANUFACTURING , FLOUR MAKING MACHINES , INDUSTRIAL STRUCTURES , RAIL COACHES

Under crank shearing machine are drafted and plan through structural inspection technique for prominent performance, continuous and large-scale production, accurateness and high longevity.Interconnected in design with strong weld structure of MS plates

Size : 1525 to 4000 mm

Thickness : upto 4 mm (ms)

WELDOR Shearing Machines have been designed & developed through structural analysis technique of continuous production accuracy and repeatability.1. Frame: Rigid steel frame of Weldor Shears are optimally designed to avoid weak sections at load supports an is of interlocked design. The ram is guided throughout its length by accurate machined guideways ensuring proper clearance and clean cut.2. Hold-down system: Spring loaded mechanical Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.3. Knives: Weldor Shears are provided with high quality single segment (HcHcr) knives for longer tool life. ease in assembling of knife reduces down - time. the knife blades are four edged.4. Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.