Vacuum Autoclave Dealers

• FEATURES: 4 pre-selected cycle programs, No steam discharge in open area, LCD controller for easy operation, Immediate steam & efficient air removal.
• Working pressure: 0.22 Mpa
• Working temperature: 0 to 134°C
• Timer: 0 to 99 minutes
• Construction: Stainless steel 304
• Door lock: Hand wheel type
• Gasket: Joint less silicone rubber gasket
• Basket: 2 Nos. wire mesh baskets
• Controller: LCD controller
• Operation: Fully automatic operation
• Programs: 4 preselected programs
• Vacuum cycle: Pulse vacuum cycles
• Air filter: 0.2µ bacterial air filter
• Vacuum pump: Included
• Power supply: 220 Volts 50Hz

simply placing transformer in autoclave vessel under vacuum will not remove moisture form that. For evaporating water into steam latent heat of water is to be supplied.when transformer put in to the autoclave for drying heat energy is transferred to transformer via convection and radiation. Compared to convection energy transfer by radiation is very low. During vacuum drying as air is sucked out there will not be any transfer of heat by convection. This necessitates heating by hot air of sufficient duration,before vacuum drying in the autoclave vessel by externally either by thermic fluid heating systemelectric heating systemsteam heating by means of radiator coils inside autoclave or limpets welded outside the autoclave..

• Type: Vacuum Sterilizer Autoclave
• Brand Name: Biobase
• Warranty: 1 year
• After-Sales Service Provided: Yes
• Place of Origin: China

Application: It can be widely used in department of stomatology and ophthalmology, operating room and other medical institutions. It is suitable for all wrapped or unwrapped solid instrument, A-class cavity instrument (dental hand-pieces and endoscopes), implantable instrument, dressing fabric and rubber tubes, etc. Features: 1. Built-in efficient steam generator, microcomputer temperature control. 2. Equipped with printer to print date, time and process parameters. 3. Prefect four-level authority management system to avoid mis-operation. 4. LCD displays temperature, pressure, time, running status, failure and warning code. 5. Sterilization programs for fabric, instrument, rubber, liquid, cavity, B&D test, PCD test and leakage test. 6. Intelligent drying system to guarantee the residual humidity of instrument and dressing no more than 0.2% and 1% respectively. 7. Overheat auto protection device, dual door safety lock device, over pressure relief valve, short circuit protection, and over pressure protection.

Dimensions: Vacuum Drying autoclaves up to 15 Mtr length, 6 Mtr width and 6 Mtr height are manufactured. These are structured to withstand the tempreture and vacuum cycles, while maintaining the process requirements. The autoclaves can have horizontal or Vertical Orientation. Door Operation Manual (for smaller sizes), winch driven or Hydraulically Operated door systems are available. Manual as well as hydraulic clamping can be provided. Various safety interlocks can also be provided as required Heating System: For medium and large autoclaves, it is customary to employ radiators with thermic fluid heating. Certain customers may have factory premises with standardised thermic fluid heating facility. In such cases, the autoclave heating system can be adopted to the same. We normally provide tube and shell constructed, indirect type (Electrical heaters placed in protection tubes), gentle heating exchangers. Division of power in groups with selective thermostatic controls for larger capacities is a standard feature. Of Course, more sophisticated controlling systems such as TIC, Band width PID controllers etc. can be offered. For smaller sizes of Autoclaves, direct heating can also be provided although anu of the above options are available.

We are offering vacuum drying autoclave. we are engaged in providing vacuum drying autoclave to our esteemed clients. The vacuum drying autoclave has been manufactured using high grade material. Our vacuum drying autoclave matches up with the international standards. In order to match up with the requirements of the customers, we provide the vacuum drying autoclave as per the customized specifications. used for drying and removing moisture from transformers available with 15 tons capacity

• Type: Vacuum
• Material: Stainless Steel
• Shape: Rectangular
• Color: Metallic
• Voltage: 220V
• Usage: Laboratory Use

Research, development, production and in-house testing of Vacuum Vapour Phase Drying Plants and Technology is one of Micavac's core businesses. CEEDEE VACUUM offers ‘Micavac patented JET Evaporator System’, used in new plants or as an upgrade of existing plants. The system makes use of aerospace technology to shorten heating-up times by optimising heat transfer of solventkerosene-vapour. Additionally, putting minimal stress on cellulose insulation by distributing heat evenly, results in minimised depolymerisation.

Our Vacuum Drying Autoclaves are designed and manufactured as per the specifications provided by our clients. We have the capability to manufacture high performance autoclaves which increase the efficiency and performance of any plant. This equipment comprises a vacuum autoclave in which a cylinder containing a piston is situated at one end and can be closed at the end by a hollow piston containing a condenser casing. The cylinder is evacuated through a port and the piston is lowered to close the port immediately an injection valve is opened to fill the cylinder with an impregnating substance. When the injection valve is shut the piston slowly presses the impregnant out through the neck of the condenser casing. The pressure is increased till the ejection valve opens. A blast of gas cleans the cylinder to remove any remaining impregnant.  

Our Vacuum Drying Autoclaves are designed and manufactured as per the specifications provided by our clients. We have the capability to manufacture high performance autoclaves which increase the efficiency and performance of any plant. This equipment comprises a vacuum autoclave in which a cylinder containing a piston is situated at one end and can be closed at the end by a hollow piston containing a condenser casing. The cylinder is evacuated through a port and the piston is lowered to close the port immediately an injection valve is opened to fill the cylinder with an impregnating substance. When the injection valve is shut the piston slowly presses the impregnant out through the neck of the condenser casing. The pressure is increased till the ejection valve opens. A blast of gas cleans the cylinder to remove any remaining impregnant.

Our Vacuum Drying Autoclaves are designed and manufactured as per the specifications provided by our clients. We have the capability to manufacture high performance autoclaves which increase the efficiency and performance of any plant. This equipment comprises a vacuum autoclave in which a cylinder containing a piston is situated at one end and can be closed at the end by a hollow piston containing a condenser casing. The cylinder is evacuated through a port and the piston is lowered to close the port immediately an injection valve is opened to fill the cylinder with an impregnating substance. When the injection valve is shut the piston slowly presses the impregnant out through the neck of the condenser casing. The pressure is increased till the ejection valve opens. A blast of gas cleans the cylinder to remove any remaining impregnant.  

Top end model for sterilization of all critical application with exact reproducibilityUnique double wall design Heavy duty jacket Fully automatic operationµp based PID controller with dual display for Temp. & Time Pre & Post Vacuum available Reduced loading height

Applications: The SLL-Vacuum series Autoclaves are ideal for critical applications and hard to sterilise items where assured    sterilization is required Ideal for Pharma QC, QA, Micro, R&D, Production, Discard; Chemical Plants; Bio-Labs; Waste Treatment; Hospitals and    Nursing Homes. Advantages: Unique single lever lock for lid with single hand opening. User friendly programmable Controller with options of pre-vacuum, free-steaming and post vacuum, besides time & temperature, makes it fully automatic. Programmable logic Controller ensures repeatability,high performance & accuracy. Conformance to National & International Standards. Easy lift and closing of the lid by assisted support. Built in validation port enables user for self calibration checks. User settable: No of -ve pulsing, No of +ve pulsing, Sterilisation temp. & time, Post vacuum & drying time Low water detection. Pressure interlock on door.

Applications: The SLL-Vacuum series Autoclaves are ideal for critical applications and hard to sterilise items where assured    sterilization is required Ideal for Pharma QC, QA, Micro, R&D, Production, Discard; Chemical Plants; Bio-Labs; Waste Treatment; Hospitals and    Nursing Homes. Advantages: Unique single lever lock for lid with single hand opening. User friendly programmable Controller with options of pre-vacuum, free-steaming and post vacuum, besides time & temperature, makes it fully automatic. Programmable logic Controller ensures repeatability,high performance & accuracy. Conformance to National & International Standards. Easy lift and closing of the lid by assisted support. Built in validation port enables user for self calibration checks. User settable: No of -ve pulsing, No of +ve pulsing, Sterilisation temp. & time, Post vacuum & drying time Low water detection. Pressure interlock on door.

Our Vacuum Drying Autoclaves are designed and manufactured as per the specifications provided by our clients. We have the capability to manufacture high performance autoclaves which increase the efficiency and performance of any plant. This equipment comprises a vacuum autoclave in which a cylinder containing a piston is situated at one end and can be closed at the end by a hollow piston containing a condenser casing. The cylinder is evacuated through a port and the piston is lowered to close the port immediately an injection valve is opened to fill the cylinder with an impregnating substance. When the injection valve is shut the piston slowly presses the impregnant out through the neck of the condenser casing. The pressure is increased till the ejection valve opens. A blast of gas cleans the cylinder to remove any remaining impregnant.

Reliable and robust class b autoclaves intended to deliver highest quality of sterilization. These autoclaves are easy to clean and its compact dimensions make it an ideal option for today’s contemporary clinic. Basic specification : capacity: 8 l sterilization temperature: 121°c, 134°c sterilization time: 24 min working pressure: 0.21mpa chamber material: stainless steel sus 304.

• Design Temperature: 139°C
• Doors: Single / Double (two sides) w/ pressurized locking system

Each Pulse Vacuum Sterilizer by Bionics Scientific is designed and developed to meet the GMP sterilizing requirements in pharmaceutical and biotechnology projects. These pharma grade sterilizers are new generation sterilization and vacuum drying equipment, equipped with printer, PLC and Touch Screen HMI to provide a friendly man-machine interface for automatic controlling, automatic temperature recording, vacuum drying etc. These pulsating vacuum sterilizers use full steam as sterilizing medium and configured for either single entry or pass-through (single door or double doors) As first stage, these sterilizers adopt pulsation vacuum exhausting process to remove cold air influence to temperature. When sterilizing process finishes, these sterilizers adopt vacuum drying to dry the materials. These units have been proven in a wide range of material sterilizing including clothes, dressings, metal instruments and glass containers. With more than 25 years of experience and a team of talented professionals, we are bringing to you a series of Pulse Vacuum Fully Automatic Steam Sterilizers, which is in full accordance with GMP regulations and meets all designing and manufacturing standards. To maintain reliability and performance, we use only branded and imported components. Not limited to India, we also cover market of Asia, Africa and Middle East countries to give worldwide exposure. Each unit is sold at factory price with assistance of installation.

Rubber Vulcanizer manufacturer in Coimbatore India We are a leading manufacturer of Rubber Vulcanizer in in Coimbatore India We are manufacturing huge autoclaves for Rubber Vulcanizing sizes from 0.5m to 8m Diameter and Length Upto 100m It is fully automatic, Programmable and Computer controlled

vacuum autoclaves, ear thermometer, examination lamps

vacuum autoclave, Aluminium Autoclave

pre vacuum autoclaves, Medical Equipment, Laparoscopic Instruments

vacuum autoclave, Horizontal Autoclave, Platelet Incubator

vacuum autoclaves, Industrial Centrifuge, leaf filters, Pressure Vessels

High Pressure High Vacuum Autoclaves, Autoclaves Cum Shredder

vacuum autoclaves

Vaccum Autoclave, Vaccum Drying Plant, Oil Filtration Elements

vacuum autoclave, Microscopic Slide Tray, Gas Wash Bottles, filtering flask

Pre & Post Vacuum Autoclaves

vacuum autoclaves, Flame Proof Hoist, Crane Hoist

vacuum autoclaves