Vibration Rod Level Switches Dealers (31 products available)

• Material: Mazak III
• Enclosure: Sealed Ingress Protection to IP 67 to BS EN60947-1
• Finish: Chromate Passivation with Polyester Point (Grey)
• Set Level Range: 0.5 to 9g Peak acceleration
• In case of Gold Contacts: 0.5 A 30 VDC max for 1.S. Currents
• Contact Arrangements: SPCO or, DPCO
• Temperature Range: -55 to +85°c
• Electrical Reset: Manual

Contact Rating with Silver Contacts :  5 A 240 VAC (non-inductive) SPCO 3 A 30 VDC (non-inductive) up to 1 million operations 4 A 240 VAC per contact for D Pole Versions

• range: 50mm/S

Vibration Switch provides essential protection for critical fans, pumps, motors and other industrial machines. It measures the vibration to which it is exposed and generates relay output when vibration exceeds the preset threshold values. The Vibration Switch VSW-160 is well equipped for rotating machine protection applications. It offers bright 3½ digit display, precise 4-20mA analog output and one relay output with status indicator resulting in three-in-one product. Set point setting for relay output is user configurable. Remote sensor mounting gives better performance and higher temperature compliance.

• Specialities: Universal mounting plates and studs , Local and remote reset

The PT500 Mechanical Vibration Switch provides an economical solution for basic vibration monitoring of a wide variety of rotating and reciprocating equipment. Its reliable vibration sensing mechanism actuates a set of internal contacts when vibration levels exceed the adjustable set point.

Vibration switch does the function of a “watch dog”. Certain amount of vibration is allowed in all the systems / Products. Vibration beyond a limit is catastrophic. This device monitors the vibration level of a machine, system and switches off / alarm, if its vibration goes out of the set limit. This can prevent unscheduled break downs for various heavy machinery such as large motors, gear boxes, cooling tower fans, etc. IPA make Vibration Switch consist of • Accelerometer with a frequency range of 10 Hz to 10 KHz giving an output proportional to acceleration.• A level setting circuit, to set the allowable level of acceleration.• A relay output, when the vibration exceeds the set level. This relay output can give warning or can shut the equipment under consideration.

• Model No: 1800/ VS 
•  Input:  From PIE Accelerometer through 3 core shielded cable
•  Velocity Range: 0-25.0mm/sec 
• Velocity set point adjustment : By Graduated potmeter on the front panel 
•  No. of set points: Two 
•  No. of Relay contacts: One change over contact each 
•  Relay contact rating: 5A @ 230V DC 
•  Alarm/Trip Relay Indication: By red color LED 
• Start-up time delay : 30 seconds From the time of power up 
•  Reset: Manual : Push switch on the front plate  
•  Supply of Accelerometer: 5V DC from the Vibration Switch 
•  Input Power: 90-270V /- 10% @ 50Hz   /- 5% 
•  Humidity: 95%Rh (max) 
•  Enclosure: Rugged Metallic casing 
•  Ingress Protection: IP 20
•  Mounting: Panel Mounting type
•  Size: 192 mm x 96 mm 
•  Cut Out: 188 mm x 92 mm  
•  Terminals: Suitable to 2.5 Sq.mm cross section wire  from the back
• Features: Easy to operate, Hi tech technology used, Tested in various parameters

Direct replacement for mechanical switches with universal mounting plates and studs 4-20mA output Dual alarms with relays or triacs NEMA 4X, IP65 environmental rating Hazardous area approvals: CSA, CE, ATEX, GOST-R, PCEC

Overview:   Vibration switch does the function of a “watch dog”. Certain amount of vibration is allowed in all the systems / Products. Vibration beyond a limit is catastrophic. This device monitors the vibration level of a machine, system and switches off / alarm, if its vibration goes out of the set limit. This can prevent unscheduled break downs for various heavy machinery such as large motors, gear boxes, cooling tower fans, etc. PreethiTech Vibration Switch consist of • Accelerometer with a frequency range of 10 Hz to 10 KHz giving an output proportional to acceleration.• A level setting circuit, to set the allowable level of acceleration.• A relay output, when the vibration exceeds the set level. This relay output can give warning or can shut the equipment under consideration.

• Type: VS102 Electronic Vibration Switch
• Features: Direct replacement for mechanical switches with universal mounting plates and studs, Dual alarms with relays or triacs .
• output: 4-20mA

• Type: Flowline Switch-Tek Vibration Level Switch
• Accuracy Of Depth Range: ± 1 mm in water
• Relay Output: SPST relay rated for 60 VA
• Wetted Material: Glass filled Ryton®, Viton®,
• Max Process Temperature (° C): 80
• Min Process Temperature (° F): -40
• Max Pressure (PSI): 150
• Power (VDC): 12 to 36

Vibration switch provides essential protection for critical fans, pumps, motors and other industrial machines. It measures the vibration to which it is exposed and generates relay output when vibration exceeds the preset threshold values. The vibration switch vsw-160 is well equipped for rotating machine protection applications. It offers bright 3½ digit display, precise 4-20ma analog output and one relay output with status indicator resulting in three-in-one product. Set point setting for relay output is user configurable. Remote sensor mounting gives better performance and higher temperature compliance. Reliability is ensured by our iso 9001 approved quality control system from ul labs. Masibus is quality manufacturer of vibration switch having various features and ranges. Vibration switch vsw-160 is a strategic tool for protection of machines which measures online vibration and provides relay output for operator alarm or machine trip purpose. Vibration is displayed and alarm is generated when vibration is abnormal. Once alarm is generated, machine data can be analyzed for the root cause of increased vibration. This provides an opportunity for early fault detection. Vibration is monitored in terms of r.m.s. And peak. When overall vibration is to be measured, r.m.s. And peak measurement technique is considered best for general machine health. Vibration switch makes online vibration monitoring cost-effective with its optional retransmission analog output which can be connected to plant rtu plc dcs systems. Masibus has a proven track record of manufacturing online process monitoring instruments for over 3 decades.

• Mounting Options: Bottom Mount
• Brand Name: ABB
• Pole And Throw Specification: DPDT
• Features: Efficient Sensing, Easy installation. Maintenance free
•  :  

• Power/Voltage: 20 to 60 Vdc / AC
• Time Delay: 1 Seg
• Electrical Connections: Plug DIN 43650 / M12 connector
• Max Pressure: 725 PSI (50 Bar)
• Accuracy: 0.1%
• Enclosure Material: 316 S.S
• Repeatibility: 0.5mm
• Consumption: 3mA
• Viscosity: 0.5 to 5000 cSt
• Set point: 13mm from tip

• Brand Name: Smart Tech
• Country of Origin: Made in India
• Switch Type: Flameproof
•  :  
• Model Name/Number: Vibromon 1
• Power/Voltage: 230V AC
• Material/Body: Metal

• Voltage: 230VAC
• Size: 115 x 115 x 100mm, 200 x 200 x 130mm
• Humidity: 1 % To 90 % (Non Condensing)
• Operating Temperature: 10dig C To 55dig C
• Weight: 2 Kg. Nominal or 3 Kg. Nominal
• Output Power Optional: 4-20 mA

Series 3171-mr are vibration switches with options as manual reset type and remote reset type . Enclosure : sealed ingress protection to ip 67 to bs en60947-1 or, ingress protection ip 67 to bs 5420 set level range : 1 to 9g peak (horizontal vibrations) contacts : silver or, gold mounting : fix to vertical face with reset button at bottom. note : ac solenoids normally continuously rated dc solenoids intermittent 25% rated i.e. (1 min. On & 3 mins off) electrical reset : solenoid rating 48 watts maximum intermittent rating solenoid voltages 110, 240 ac or 24 dc

Vibration based condition monitoring is necessary for all rotary equipments to keep them in a healthy condition. This fact applies to all scales of industries – be it a small scale industry or a large scale industry, they all need to have some thing to monitor and protect the condition of their rotary equipments. IRD429 is a Vibration Switch designed to meet the requirements of both small scale as well as large scale industries. It is a compact, affordable and reliable solution for Vibration based condition monitoring. It eliminates the need of additional electronics and cables as its sensor body itself has the necessary electronics to provide output and relay contacts. The switch which is externally powered provides 4-20 mA output. It also provides a relay contact for trip for tripping the machine in cases of high vibration. It is equipped with False trigger delay to prevent tripping of machine due to spurious high vibration. The trip value and the time delay can be set by rotating the rotary dial on the sensor body itself. Colour indication via LED is also available on the body itself with Green indicating healthy condition and Yellow indicating Trip. This Vibration switch is well suited for Building Services, Pulp and Paper, Mining, Metals, Utilities, Automotive, Water, Pharmaceutical and many other industries. Contact your nearest Sales representative of IRD to know more about the switch and receive a quote for the switch.

Vibration sensitive switches are used to protect rotating plant and reciprocating machinery. They are adjustable to operate above the normal running levels of vibration, activating alarm or machine shut-down circuits.The vibration switches have a low frequency response, which makes them ideal for detection of mass unbalance on most machines. They are inherently insensitive to high frequency components and those caused by external knocks, etc.

• Material: Stainless steel
• Brand Name: UWT
• Model Number: Mononivo MN4030
• Housing: Aluminium IP67, NEMA Type 4X
• Approvals: ATEX, IECEx, FM, CSA, TR-CU
• Process Temperature Range: -40 C to + 150 C
• Pressure: -1 bar to + 16 bar

vibration switches, Fls-03 Level Switch, FLS-04 Level Switch