Wet Drum Magnetic Separator Dealers (31 products available)

• Application: Removing Iron Chips And Ferrous Particles
• Voltage: 440V
• Automatic Grade: Automatic
• Driven Type: Electric
• Brand Name: MAK
• Type: Wet Drum Magnetic Separator
• Condition: New
• Power: 1-3kw, 3-6kw

Wet Drum Separators are mainly used for the recovery of magnetic/ferrosilicon in dense media plants and iron ores. Wet drum separators work on a similar principle to our other existing drum separators. A stationary magnet system with several radial poles attracts the magnetic material to the drum face. The  rotating cover then carries the magnetics from one pole to another, at the same time rotating the magnetic particle to allow trapped non magnetics to free fall. This should then produce a clean magnetic product completing the magnetic separation process. Wet drum separators have three basic designs that work with 3 different types of application, they are  concurrent, counter flow and counter current. The purpose of this is to ensure that we can meet recovery figures of 99.9% when dealing with different solid to liquid ratios.    

The wet drum magnetic separator is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The wet separator is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the high gradient magnetic filter. the liquid flows through a semicircular separating chamber beneath a stainless steel drum to which the magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all magnetic separators. Wet drum magnets have high magnetic recovery and discharge the feed slurries recover the magnetic. It is available in single or multiple drum applications. The drum is made from thick stainless steel for long service life. Wet drum separators are available in different configuration like single drum, double drum and multiple drum.for more details please

• Application: Separating Iron, Chemicals, Food, Flour Particles
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg, 500-600kg, 600-700kg, 700-800kg, 800-900kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year
• Certification: CE Certified, ISO 9001:2008
• Condition: New
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw

• Application: Removing Iron Chips And Ferrous Particles
• Country of Origin: India
• Condition: New
• Type: Wet Drum Magnetic Separator

Our wet drum separator is used to remove very fine magnetizable components from low-concentration, low-viscosity liquids. The wet drum separator is intended for use in the metal processing industry and the treatment of pre-concentrates extracted from the high gradient magnetic filter. In a wet drum separator, around 90% of the grain sizes ranging from 1 µm to 1000 µm can be separated as sludge. Salient Features: ·       Wet drum magnets have high magnetic recovery and discharge·       The feed slurry recovers the magnetic impurities·       Available in single or multi-drum models·       Permanent magnet assembly eliminates coil burn-outs·       The magnet/pole elements are bolted to a mild steel shaft·       The drum is made from thick stainless steel for long life·       Wet drum separators are available in different configurations like single, double, and multiple drums. In a double drum, two separators are arranged back-to-back with a common feed             Applications: ·       Glass Industry·       Chemical Industry·       Plastic Industry·       Mining Industry·       Food Industry·       Pharmaceuticals industry·       Foundry Industry  

• Country of Origin: India
• Certification: CE Certified
• Application: Industrial
• Weight: 100-200kg
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1 Year
• Type: Automatic

Wet Type Drum Separator These products are widely used for removing ferrous impurities from different materials. These products are manufactured from optimum grade stainless steel, which is procured from reliable vendors. As per the specification provided by our customers, these separators can have single or double configurations. Driven by an intense desire to achieve maximum customer's satisfaction, our logistic team ensures effective and timely delivery of our products. Application Areas : Minerals Chemicals Food Flour Plastics Grains Sand Cement Fertilizers

We are offering magnetic wet drum separator being a customer focused organization, we are engaged in offering a wide assembly of industrial magnetic drum separator. The offered range of industrial magnetic drum separator is manufactured using supreme grade raw material to adhere with the industry laid standards and guidelines. In addition to this, the offered range is applicable in different industries: iron ore beneficial processing plant iron ore jiggling process iron ore wet jiggling process upgrading the iron ore iron ore washing plant sand washing plant.

The liquid flows through a semicircular separating chamber beneath a stainless steel drum to which the magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all magnetic separators. For recovering magnetic ferrosilicon in dense media plants and iron ores wet drum separators are primarily used. They remove contaminants from the product stream, increasing product purity and plant productivity. In the applications where the product purity is most essential, the wet drum separators can use powerful rare earth magnets which can remove very fine and weak contaminants even from dense materials.

We offer high quality Wet Magnetic Drum Separator, which is ideal for removing very fine magnet stable components from liquids with low concentration and low-viscosity. Our Wet Magnetic Separator has high magnetic recovery and discharge. The Wet Magnetic Drum Separator, which we manufacture from thick stainless steel, has a long service life. Available In Following Configurations Single drumDouble drum Multiple drum Applications Metal Processing Treatment of pre-concentrates

The wet drum magnetic separator (known as NTS) is used to remove very fine magnetisable components from low concentration, low-viscosity liquids.   NTS is mainly used by metal processing industry and for the treatment of pre-concentrates extracted from high gradient magnetic filter.  About 90% of the very fine magnetisable components can be separated as sludge.  Features such as stainless steel housing and powerful neodymium iron boron magnets are standard.   General Principles: The liquid flows through a semi-circular separating chamber beneath a stainless steel drum to which the magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum.  These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all Magnetic-Separators. For recovering Magnetic/Ferro-silicon in dense media plants and iron ores, wet drum separators are mainly used. They remove contamination from the product stream, increasing product purity and plant productivity.  In the applications where the product purity is most essential, the wet drum separators can use powerful Rare Earth Magnets, which can remove very fine and weak contaminants even from dense materials.     Features of Wet Drum Magnetic Separator: Wet drum magnets have high magnetic recovery and discharge. The feed slurries recover the magnetic. It is available in single or multiple drum applications. Recover magnetic solids in as clean as a magnetic concentrate. Permanent magnet assembly eliminates coil burn-outs The magnet/pole elements are bolted to a mild steel shaft. The drum is made from thick stainless steel for long service life. Wet drum separators are available in different configuration like single drum, double drum and multiple drum. In double drum two separators are arranged back to back with a common feed back.

Wet Drum Separator are mainly used for the recovery of magnetic / ferrosilicon in dense media plants and iron ores. Wet drum separators work on a similar principle to our other existing drum separators. A stationery magnet system with several radial poles attracts the magnetic material to the drum face. The rotating cover them carries the magnetic from one pole to another, at the same time rotating the magnetic particle to allow trapped non magnetic to free fall.

We are engaged in manufacturing wet magnetic drum separator (known as nts) is used to remove very fine magnetisable elements from low concentration and low-viscosity liquids. These wet magnetic drum separators are mainly used to degreasing liquids, filter concentrates, minerals, degreasing baths, coolants. Features wet drum magnets have high magnetic recovery and discharge high performance, reliable and durability easy to maintain.

• Capacity: 10 tons per hour
• Material: Stainless Steel
• Number Of Drum: Single and double drum arrangement
• Usage/Application: mining & mineral processing
• Power Source: Electrical
• Power: 7.5Hp-30Hp
• Phase: Three phase

we are one of the leading manufacturers, exporters, and suppliers of wet drum magnetic separators. The wet drum magnetic separators are process equipment that is known for advanced engineering design and excellent performance. We manufacture a wide range of wet drum magnetic separators to mining and mineral industries. Avail the wet drum magnetic separators from us at market leading price. product models and sizes stl's wet permanent magnetic separators are offered in sizes of dia.1200 mm and 916mm in lengths of up to 3000mmthree basic separator designs are available for cobbing, roughing and finishingcleaning applicationseach type can be supplied in single drum or multiple drum stages of taconite or magnetite and also for recovery for magnetic medium in dense media plantsthe stationary magnet yoke is an assembly of strontium-ferrite permanent ceramic magnetsthe rotating drum is available with optional rubber or stainless steel coversthe magnetic flux pattern will match the tank configuration for optimum performancestl's magnetic wet separator dia 916 x 300 mm is the smallest full scale separator in the 916 series and is primarily used for pilot plant teststhe separator can be delivered in concurrent, countercurrent and counter rotation versionsstl's magnetic wet separator for laboratory use has drum dimensions dia. 600 x 285 mm and dia.200 x 100 mm and are suitable for batch or continuous testingthe separators correspond closely to those obtained in full scale operationpilot unit dia. 916 x 300mm. Leftstl's magnetic wet separators have been developed in close cooperation with the swedish mining industry for treatment of magnetitea prime consideration in its advanced engineering design has been high capacity, improved metallurgical performance and highest availabilitythe separator is constructed as a separate unit consisting of drum with magnet yoke, tank and drive package, all mounted on a heavy-duty framethe design of the frame allows any number of units to be connected in series as multi-stage installationthis design offers a flexible flow sheet layoutthe drum shell is made of non-magnetic stainless steel with abrasion-resistant wear cover and sealed heads of cast rigid aluminum alloythe drum shaft runs in spherical, self-aligning antifriction bearings adjustment of magnet yoke and drum the magnet yoke is mounted on the stationary drum shaft and its position can be adjusted (+-35) by a lever at the end of the drum shaft to optimize running conditions in accordance with tank design and type of orethe gap between tank and drum, which determines the pulp flow speed, can be adjusted vertically by shims inserted under the bearing housing and shaft supporthorizontal adjustment is by slotted holes drive unit the standard drive train consists of a shaft end mounted torque arm speed reducer outside the tank with v-belt pulley driven from a standard electric motorthis arrangement provides a smooth protected transmission and has several advantages compared to chain drivesalso other drive arrangements can be suppliedthe v-belt drive is protected by a steel guardas an alternative the separator drive unit can be supplied with an easily removable fiberglass coverthese covers protect the entire drive unit and motor, with opening for lubrication maintenance and inspectionsthe steel v-belt guard is preferred for users in extreme climatic conditions, e.g. Tropical and subtropical.

The wet drum magnetic separators is ideally used to separate ferrous particles from non ferrous particles . They are so made by us to provide ultimate protection to crushers, grinders, pulverizers and allied equipment and is useful for mining and ore dressing industry. It is so made that one side is magnetized and the other side is not. operating principle : only one side of the magnetic drum is magnetized and the other side is not magnetized. The stainless steel 304 shell which surrounds the magnet rotates freely and the magnet is stagnant. The ferrous particles that get attracted to the magnet are collected separately. Applications : it is ideally used in ceramic, chemical, glass, fertilizer and food industry separates iron particles from granules and powder. The magnetic drums are suitable for capacities up to 2tons per hour can be given on short deliveries. They have a varying dimension of 300mm. To 600mm. The diameter and length varies up to 1500mm and has a capacity to handle 10 tonnes.

Product Description : The Wet drum separator NTS is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The NTS is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the high gradient magnetic filter HGF.   General Principle : The liquid flows through a semicircular separating chamber beneath a stainless steel drum to which the magnet sable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all magnetic separators. For recovering magnetic / ferrosilicon in dense media plants and iron ores wet drum separators are primarily used. They remove contaminants from the product stream, increasing product purity and plant productivity. In the applications where the product purity is most essential the wet drum separators can use powerful rare earth magnets which can remove very fine and weak contaminants even from dense materials.   How it Works : The liquid flows through a semicircular separating chamber beneath a stainless steel drum gather is a semicircular separating chamber through which the liquid flows. The cylinder consisting of permanent magnetic discs are positioned within the drum to which the magnetizable particles are attracted. By rotating the drum, the filter cake is lifted out of the slurry and the magnetic field.   Features : Wet drum magnets have high magnetic recovery and discharge. The feed slurries recover the magnetics. Available in single or multiple drum applications. Recover magnetic solids in as clean a magnetic concentrate as possible. Permanent magnet assembly eliminates coil burn-outs. The magnet / pole elements are bolted to a mild steel shaft. The drum is made from thick stainless steel for long service life. Wet drum separators are available in different configuration like single drum, double drum and multiple drum. In double drum two separators are arranged back to back with a common feedback.   Applications : Glass industry Chemical industry Plastic industry Mining industry Food industry Pharmaceuticals industry Foundry industry Buyers Advantage   Wet drum separator has following advantages for the buyers : The separator provides minimum wear on the cylinder. The materials are return to the feed point automatically. It has the high magnetic solid discharge. It can also handle heavy magnetic load. Wet drum separator has wide industrial usage.

We are offering wet drum magnetic separator. The wet drum separator nts is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The nts is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the high gradient magnetic filter hgf.

The wet drum separator NTS is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The NTS is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the STEINERT high gradient magnetic filter HGF. Around 90 % of the grain sizes ranging from 1 µm to 1000 µm can be separated as sludge. Features such as stainless steel housing and powerful neodymium iron boron magnets are standard.General Princip :The liquid flows through a semicircular separating chamber beneath a stainless steel drum to which the magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all magnetic separators. For recovering magnetic / ferrosilicon in dense media plants and iron ores wet drum separators are primarily used. They remove contaminants from the product stream, increasing product purity and plant productivity. In the applications where the product purity is most essential the wet drum separators can use powerful rare earth magnets which can remove very fine and weak contaminants even from dense materials. How it Works : The liquid flows through a semicircular separating chamber beneath a stainless steel drum gather is a semicircular separating chamber through which the liquid flows. The cylinder consisting of permanent magnetic discs are positioned within the drum to which the magnetizable particles are attracted. By rotating the drum, the filter cake is lifted out of the slurry and the magnetic field.    Features :   Wet drum magnets have high magnetic recovery and discharge.   The feed slurries recover the magnetics.   Available in single or multiple drum applications.   Recover magnetic solids in as clean a magnetic concentrate as possible .   Permanent magnet assembly eliminates coil burn-outs .   The magnet / pole elements are bolted to a mild steel shaft.   The drum is made from thick stainless steel for long service life.   Wet drum separators are available in different configuration like single drum, double drum and multiple drum. In double drum two separators are arranged back to back with a common feed back.   Applications :   Glass industry   Chemical industry   Plastic industry   Mining industry   Food industry   Pharmaceuticals industry   Foundry industry   Buyers Advantage :     Wet drum separator has following advantages for the buyers :   The separator provides minimum wear on the cylinder.   The materials are return to the feed point automatically.   It has the high magnetic solid discharge.   It can also handle heavy magnetic load.   Wet drum separator has wide industrial usage.

The Wet Drum Magnetic Separator is used to remove very fine magnetisable components from low concentration, low-viscosity liquids. The wet separator is intended for use in the metal processing industry and for the treatment of preconcentrates extracted from the high gradient magnetic filter.

Wet drum magnetic separator For recovering magnetic ferrosilicon in dense media plants and iron ores wet drum separators are primarily used. They remove contaminants from the product stream, increasing product purity and plant productivity. In the applications where the product purity is most essential the wet drum separators can use powerful rare earth magnets which can remove very fine and weak contaminants even from dense materials.

 Electro Magnetic Industries Wet Drum Separator is a combination of Drum with unique permanent magnet arrangement and a specially design counter rotation tank, which results in a unit with performance exceeding that of conventional separators. Electro Magnetic Industries drums are provided withered 915mm diameter and available in magnet width from 610mm to 3050mm. The capacity and the performance figures given are for the drum in our counter- rotation tank. Capacity per meter of Drum width up to: Pulp 160m3/h- Magnetite30t/h- ferrosilicon 40t/h. The Drum is direct driven by a shaft mounted geared motor unit which eliminates the main-tenance and spare parts associated with chain or belt drives. The drum shell, end flanges and a tank are all made from 304 grade stainless steel. The tank has a full – length weir with adjustable apex. The amount of overflow water and pulp level is controlled by the apex position and orifices plates in the underflow outlets. The drum shell can be fitted with stainless steel wear wrap, alternatively covered with rubber or polyurethane. The internal surface of the tank can be lined with rubber or polyurethane. A trash screen is fitted in the feed box section of the tank. The position of the Drum in the tank is easily adjustable, horizontally and vertically. Recovery up to: 99.9% for primary duty.Concentrate density up to: 3.6 with ferrosiliconThe Drums can be installed into existing tanks (counter- rotation or concurrent) for increased recovery and /or concentrate density. They are particularly suitable for secondary duty, recoveries of over 60% being obtained with pulps containing less than 0.1g/l magnetic. The wet drum separator was developed to meet the needs of DTMS plant designers and operators, for a unit with increased capacity, improved performance, minimum maintenance and space parts requirements. The separator consist of a drum with stationery permanent magnet assembly, tank and drive unit ,all mounted on robust frame.

ENESTEE manufactures and market the high efficiency, operationally economical CLIMAXX type wet drum magnetic separators. The separator recovers Magnetic Media (magnetite or ferrosilicon) in dense media applications. The ENESTEE separator features a wide angle magnet, assembled in a specially designed tank, that improves the recovery of fine magnetite or ferrosilicon. The magnetic media is then discharged at a higher than normal density. High concentrations of magnetic and non-magnetic material in the feed are easily handled. The design of the tailing removal system prevents plugging of the tailing spigot. Level control is flexible and does not require operator attention. Technical Data Drum Diameters 36" , Drum Width 4' - 10' 750 Gauss Inter-pole Magnetic Element Extended Arc, 6 Main Poles and 5 Inter-poles All Stainless Steel Construction Grease able Bearings 16 Gauge Wear Wrap

Wet Drum Magnetic Separator, Wet High Intensity Magnetic Separator

Wet Drum Magnetic Separator, holding magnets, Electro Lifting Magnet

belt furnace, assembling machine, Cutting Machine, Drawing Machine

Magnetic Wet Drum Separator, Magnetic Filter

Wet Drum Magnetic Separator, Micronizing Plant, Vertical Shaft Kiln