Multihead Weigher Dealers in Faridabad (14 products available)

Weight : 50g to Maximum

Manual Weigher to Pack : Granual, Masala Powder

Dimension : 1mx1mx1.5m

Power Consumption : .5 KW

Pouch Style Choice : Ready Made Pouch

We are the manufacturer of Manual weigher packaging macjne which is simple to use and install and consumes very less space as comparison to the other machines. These Manual weigher can run with the minimum power consumption of 0.5KW.We use corrosion resistant material in all our machines which increases the efficiency ,durability and productivity of our packaging machines. We use our more then 20 years of experience in the field of making parts of printing machines a, packaging machines, auto components to bring best out of us.

Type : collar type

Place of Origin : faridabad

We have established a strong foothold in the market as an authentic Manufacturer, Exporter and Supplier of Collar Type FFS Sealing Machine. Load cell based Pneumatically Operated Collar Type Form Fill And Seal Machine is suitable to pack 10gms to 100gms �snacks� in laminated film. The Collar Type FFS Sealing Machine, offered by us, is equipped with load cell based weigh metric system (10 head) to control weighs variation. Collar Type FFS Sealing Machine is also provided with Photocell unit & camera for accurate sealing of pouches at eye-registration mark. All contact parts of Collar Type FFS Sealing Machine are made of Stainless Steel. Moreover, the production output of Collar Type FFS Sealing Machine is up to 60 PPM. Model no. : IP901pnemw-10 technical specification for model no. Ip901pnemw (10 head) Features : Machine model ip901pnemw (10 head), extra heavy duty bagging machine with 10 head combination Sealing central sealing having 10-15mm seal width on top bottom and cross seal Pouch size (wxl) for width according to pouch size using change parts like forming collar & pipe only Pouch size (wxl) for length for pouch length variation, no change part is required.Necessary selection need to be done in plc. Range up to 100gms. Depending upon bulk density and flow properties of the product. Out-put in ppm( pouch per minute) with 10 head weigher up to 60 ppm- single dumping Depending upon fill weight, product, flow properties & bulk density of product to be packed It also depends upon the kind, Quality and thickness of laminate used Suitability any heat sealing films ( laminated) or alu foil based material, ldpe or bopp Paint powder coating duco finish Accuracy 0. 1%. Actual fill depend upon product characteristics, it�s consistency in it is dimensions & flow properties. Pneumatics festo janatics make cylinders, required only for actuation the pouch cutting blades & for exerting the right pressure on the draw down belts Air requirement 400 ipm @ 6. 0 kgsq. cm.

Accuracy : ±0.1-1.5g

Model : SI-707(10-18 Head )

Weighing Range : 10-1000g

Max Weigh Speed : 55 Bags/Min

Hopper Volume : 1600ml

Driver Method : Stepper motor

Option : Timing Hopper/ Double door Hopper/  Dimple Hopper/ Printer/Overweight Identifier / Rotary Vibrator

Interface : 7（10）”HMI

Power Parameter : 220V/ 1000W/ 50/60HZ/ 10A

Package Volume (mm) : 1482(L)×1080(W)×1116(H)

Total Weight(Kg) : 400

Multi Head Combination Weigher is used for packing potato chips and sticks, farsan, chiwda, namkeen, grains, tea, sugar, seeds, dry-fruits, pulses, frozen vegetable, etc. Our company manufactures, supplies, and exports the best quality Multi Head Combination Weigher. We strictly adhere to quality standards and regulations, therefore all our products are of premium quality. Highlights Available at affordable pricesTimely delivery assuranceQuality testedAdvanced technology

Fast, precise and maximum weight accuracy is achieved by this system. Multihead weighers can be attached to the packaging machines to achieve the perfect package weight. Best for products like snack foods, dry fruits, candies etc.

UNITECH offer first rate Multi Head Weigher which is load cell based and find their utility in all the relevant industries. The raw materials that are used are resourced from certified vendors. Our range of multi weigher is popular among our esteemed clients for the features including operator friendly, increased shelf life, easy lubrication system among others. Our range of multi weighed includes collar multi weigher, pneumatic collar machine and pneumatic FFS machine. We are offering pneumatic collar machine. These pneumatic collar machines are a robust machine with particular consideration for minimum maintenance and ease of adjusting and giving high reliable output. All parts in contact with product, manufactured in stainless steel. Accurate sealing die temperature control and fully controllable die pressure. Cut off blades for separating sachet from film web housed in horizontal die for maximum efficiency. Photo cell print registration. Comprehensive push button control panel with cycle counter. Front safety guard and access door electrically interlocked (Optional). Tool kit and Operator Manual supplied with the machine Product Range Rice, pulses, tea, coffee beans, candies / toffees, tablets, cashews, potato / banana wafers, snack foods, fresh & frozen foods, dried fruits, pasta pieces, detergents, hardware items, spices, soup mixes and sugar. Filling Range For IPM-901/MW : 10 grams to 500 gramsFor IPM-901/MW: 10 grams to 3000 gramsOutput Up to - 50 Packs / minute, Dependent on product type and flow propertiesPack Size For IPM 901/MWFor IPM 901/MWWidth in mm 40 to 175 50 to 250Length in mm 70 to 250 70 to 500Filling System 2 to 12 Head computerized combination weigher with following features Completely micro-processor controlled for easy set-up and operationStepper motor drives for all actuators & no Pneumatics is neededSuperior accuracy with high speed operationUser friendly colour touch screen controlsSelf-diagnosticQuick access to all parts for cleaning and maintenance. No tools required Statistical data available on screen or via optional printer outputStainless steel contact parts throughout. IP 65 ratedMachine setting can be simply programmed and stored in the machine memory to allow for different product weights, as well as products with different feeding characteristics.Weighing accuracy 0.4 to 1.0 gramProduct codes up to 99 The IPM - 901 machines can be fitted with any one of the following fillers.Stepper motor drives control both the intermediate and weighing buckets, which can be custom-set for the desired speed and product volume. 12 Head Combination weigher can be given as an option. Special Features Servo driven draw down beltsServo Motor driven high speed sealing JawsPLC control with HMIPneumatic actuated draw down belts, driven by Servo MotorDetachable Perspex and stainless steel guards. Easy for fault finding.Can be adapted to seal unsupported films using impulse sealing systemIn-built self-diagnostic featuresHourly production dataOverload protectionP.C. Uplink facility (Optional)Password protection setting Packaging Materials The machine will accept most types of laminated films up to maximum of 500 gauges (125 micron). It is important that the sealing medium incorporates the best possible slip characteristics. Pure unsupported polythene film may be used with special impulse sealing equipment. Electrical: Power Input for bagging machine 3 phase 415 V AC, 50 Hz3.4 KW Compressed Air Pressure 6.0 kg/cm2 gFor IPM 901/MWFor IPM 901/MW Floor area with weigher stand in mm 2400X2400 & 2400X2400 Height with 10 / 12 Head Weigher in mm Power Input for Multi-head weigher 220 + 5 V AC, 50 Hz, & 1.5 KVA Dimensions & Weight 2800 & 3200 Net weight in kgs 1000 & 1200 Power Input for Multi-head weigher : 220 + 5 V AC, 50 Hz, 1.5 KVA Dimensions & Weight : 28003200 Net weight in kgs : 10001200 Take-off Conveyors, In-Feed Product Elevator system, Batching device, Tear-cut devise, Perforator between sachets, Coding, Over-printing attachment, Gas. NOTE : Description and Specification of the machine are subject to change without prior notice.

Power : 1200W

Weighing Range : 50

Hopper Volume : 3L

Max Products Mixed : 4

Max Speed : 55P/M

Packing Dimension : 1080(L)x1030(W)x820(H)

Power Requirement : 220V / 50/60Hz / 6A

Driven Type : Pneumatic

Type : Packaging Line

Voltage : 440V

Packaging Type : Cartons, Pouch, Case

Power : 5KW

Condition : New

Brand Name : GENIUS

Packaging Details : Equipment fastened & supplied in sea worthy wooden pallets.

Application : Food, Medical, Chemical

Place of Origin : Haryana, India

Packaging Material : Plastic, Paper, Wood

Port : Nhava Sheva port,Mumbai

We are engaged in supplying of Pouch Multi Head Weigher

Hopper capacity : 1300 ml/bi row hopper without memory

Max weight speed : 130 bags/min.

1. Model : HMPL MHW 18

2. Range of single/max weight : 10-2000g/6500g

3. Weight accuracy : 0.2-0.5g/0.1-1.5g

4. Max weight speed : 130 bags/min.

5. Hopper capacity : 1300 ml/bi row hopper without memory

6. Driving : step motor

7. Operational panel : 8.4 inch large color LCD

We have earned the trust of our clients for supplying best Multihead Weigher in the market. Using modern cutting-edge technology and machinery, we are known for Manufacturing, Exporting and Supplying optimum Multihead Weigher. From forming a pouch to filling it with a product and sealing it, all the functions are automated. We make available Multihead Weigher fitted with collar type former pipe unit that has passed all quality tests. You can buy this machine from us at economic prices and get it delivered within the set time frame.  Features :     PL control with stable reliable biaxial high accuracy output and color touch screen, bag-making, measuring, filling, printing, cutting, finished in one operation.     Separate circuit boxes for pneumatic control and power control. Noise is low, and the circuit is more stable.     Film-pulling with vacuum double belt: less pulling resistance, bag is formed in good shape with better appearance, belt is resistant to be worn-out.     Double servo control, high precision orientation, size more nicety.     External film releasing mechanism: simpler and easier installation of packing film.     Adjustment of bag deviation just needed to be control the touch screen. Operation is very simple.     Close down type mechanism, defending power into inside machine. Specifications : AP-400P Multihead weigher. This machine automatically forms a pouch, fills it with a product, seals and then separates the "filled and sealed Pouch". The Multihead Weigher Pouch Packaging Machine is suitable for all kinds of snack Foods, dry fruit etc. This machine can be synchronized with any multi food weighing system and can pack the products in centre sealed pouches. It uses a single roll of Packing film The Machine is fitted with Collar Type Former Pipe unit that; convert flat packing film into vertically sealed tube; which is ultimately converted in to filled & sealed pouches. Horizontal Sealers act like opening & closing jaws to carry out horizontal sealing AP-400P Multihead weigher can make Central Sealed Pouches only. The machines requires supply of compressed air.     Stable bucket structure     Best weight combinations chosen by scientific computer.     Correct calculation by high-precision load cell.     Running stability through step motor.     A regulated speed of open-close material bucket cover provides measured     material, prevents crushing, and damage.     All the contact parts made of Stainless Steel to maintain neatness and hygiene.     Pneumatic Gussetting Device     Filled Pouch Conveyer ( Take Off Conveyer)     Hole punching Unit     Emboss Coding Unit     Bucket Elevator     Pneumatic Flexographic Coding Unit.     Nitrogen flushing Unit     Pneumatic Batch cutting device     Special acrylic made enclosure to avoid product contamination and dusting     Hopper level sensor device ( Minimum Material Level Sensor Device)     Automatic Voltage Stabilizer     Single Head or Double head (3 Phase) Compressor