Textile Testing Equipment Dealers in Dlf Industrial Area, Faridabad (7 products available)

  • Crease Recovery Tester

    Crease Recovery Tester

    Get Price Quote

    Color : Blue and Gray

    Material : Metal

  • Martindale Abrasion Tester

    Martindale Abrasion Tester

    Get Price Quote

    Martindale Abrasion cum Pilling Tester is used to check the abrasion as well as pilling resistance of the fabric. The equipment is designed to subject specimens under test to a controlled amount of rubbing at comparatively low pressures and in continuously changing directions to ensure that all surface fibers on the specimens are flexed in order to compare the resistance of fabrics to abrasion. Martindale Abrasion cum Pilling Tester is a calibrated, high quality, high accuracy tester. It consists of four testing plates on which the abrading fabric is attached, these four testing table are mounted on the base plate of the instrument. There is a revolving plate, which revolves with the help of three cranks, pegs & a motor. There are four sleeves attached on the revolving plate. The specimen holders for abrasion & pilling testing are provided with the instrument. There is a set of weights for applying proper pressure on the test specimens. Templates for cutting the specimen & abrading cloth and their mallet are also supplied as standard accessories.

    ...more
  • Best Deals from Textile Testing Equipment

  • Bursting Strength Tester

    Bursting Strength Tester

    Get Price Quote

    The bursting strength tester Analogue model is a highly preferred tool for testing the bursting strength of various packaging materials such as filter cloth, uneven boxes and boards, industrial fabric, solid boards of fibers, paper boards, leather, Rexene, plastic films, and sheets. The bursting strength test helps in estimation of the quality of the materials and compares it with other similar materials. The bursting strength of the materials is tested against a specific amount of hydraulic pressure applied on the materials. Other models of this instruments are also available that are as follows - Digital Model, Pneumatic Model, Computerized Cum Digital Model with Manual Clamping,  Computerized Cum Digital Model with Pneumatic Clamping   It is a reliable index for measuring the strength of various materials and packaging products. The equipment is an ideal lab testing instrument to test the materials for their strength, performance and quality. The machine offers high ease of operation. The instrument is properly calibrated for reliable and accurate results. It is used widely in many industries, education institutions, laboratories etc. There are two clamps present in the machine that are lower clamp and upper clamp. The test specimen is basically placed between both the clamps for strong hold. Adequate amount of pressure is applied on the specimen to avoid any slippage. The upper clamp has spiral grooves and the lower clamp has concentric grooves. The strength of the material is measured using the testing instrument in two ways that are manual exertion of pressure and automatic exertion of pressure through rubber structure. The area of application of pressure is circular in shape. When there is application of force, the specimen collapses along with diaphragm. In this way the bursting strength of the material is duly calculated according to the maximum pressure required to be applied on the material for failure. The pressure applied is measured using a Pressure gauge. Output   The strength calculated through this procedure is used to calculate the maximum weight that the material can bear before failure. This helps the engineers in deciding the factor of safety for the material. The results can be easily viewed and assessed in analogue meters, digital screens and in form of graphs of computer screen.   Features:   Easy installation High accuracy for calculation of bursting strength of a material. Highly useful for enhancement of the performance of the products. Easy calibration is possible. Specification:   The instrument is available with an analogue gauge. There are two clamps provided with the equipment that are upper and lower clamps with a diameter of 30.5 mm and 38.1 mm respectively. The fluid in the instrument dis-articulates at a rate of 95cc/minute. With this instrument a pressure of 35 kg per square centimeter can be applied on the specimen for measurement of bursting power. The test fluid that is used in the instrument for creating pressure is glycerin oil. There is a reduction type worm wheel gear box provided with the instrument. The power needed to operate the instrument is ½ KW and has a motor of ½ HP single phase. Related standards- IS1060 Part-I 1987. There is stiff base plate of metal used for assembly of the instrument and is given a nice appearance with autumn grey and blue color. The Equipment is provided with chrome plating for protection from rust. The equipment comes with an instruction manual, NABL certificates and spare diaphragms. 

    ...more
  • Wrap Reel

    Wrap Reel

    Get Price Quote

    length : 20mm.

    The wrap reel instrument is built up over a wooden base plate. One of the arms of the wheel kept locked in order to remove the leas from the wheel. The machine is specially designed with a digital control panel along with the revolution setting option. The yarn device moves once after every sixteen turns from a distance of 20mm to provide leas of 20mm width. The machine is designed with a bobbin stand in which five reels of 250mm length and 100mm diameter can be placed. The stand is incorporated with a yarn tensioning device to wrap the thread on the wheel. The standard reel is suitable for making metric leas or yardage. The apparatus is equipped with a spring loaded swift which crinkles for removal of thread from reel.

    ...more
  • Gsm Round Cutter

    Gsm Round Cutter

    100 Per Piece

    1 Piece (MOQ)

    Sample Cut : 100 sq/cm

    Brand Name : Testronix

    Shape : Round

    Application : Measure the quality and resilience of materials

    Country of Origin : Made in India

    Color : Grey

    Material : Aluminium

    Radius : 100cm sq.

    Blades : 4

    ...more
  • Gsm Round Cutter

    Gsm Round Cutter

    100 Per Piece

    1 Piece (MOQ)

    Sample Cut : 100 sq/cm

    Brand Name : Testronix

    Shape : Round

    Application : Measure the quality and resilience of materials

    Country of Origin : Made in India

    Color : Grey

    Material : Aluminium

    Radius : 100cm sq.

    Blades : 4

    ...more
  • textile testing equipment

    textile testing equipment

    Get Price Quote

    textile testing equipment, Testing Instruments, Paper Packaging Instruments

    ...more
Filter by Locality
top