Hi tech Kalol, Gandhinagar, Gujarat

•As wind-generated waves enter shallower coastal waters they generally become unstable and break, dissipating a fair amount of their energy. However, the remaining energy in the broken waves still has the capacity to cause shoreline erosion and/or suspend bottom sediment, which degrades water quality. •Hi-tech’s Wave ABATER system (HWAS) helps extenuate the harsh effects of natural and artificial effects of waves. •The system is engineered to act as floating breakwater thereby reducing the effect of wave when it hits the system and renders safety to the marina basin. •HWAS helps protect the marine base from damages cause by wave effects and also reduces the client vessel oscillations & thus increasing efficiency & safety of loading/unloading activities. In navy applications & in offshore platforms, movement due to oscillations caused by waves need to be reduced for navy vessels & offshore platforms to operate to its maximum efficiency.

FEATURES: •HPF-SR does not have harnessing and have ribbed surface hence are known as SLING type fenders. •HPF-SR has thicker skin compared to the fenders with chain-net-tyre harnessing. ADVANTAGES: •Being sling type i.e. without chain-net-tyre harnessing; they render easier + faster handling & maintenance. •They have less susceptibility to puncture as their skin is thicker. APPLICATIONS: •HPF-SB is most widely used for naval applications. •Passenger vessels and where abrasion due to the harnessing is not acceptable.

FEATURES : •HPF-SB does not have harnessing and are known as SLING type fenders. •HPF-SB has thicker skin compared to the fenders with chain-net-tyre harnessing. ADVANTAGES: •Being sling type i.e. without chain-net-tyre harnessing; they render easier + faster handling & maintenance. •They have less susceptibility to puncture as their skin is thicker. APPLICATIONS: •HPF-SB is most widely used for naval applications. •Passenger vessels.

Hi-Tech Elastomers has developed shock pads for the off-shore industry based on the bridge bearing pads. These pads are a combination of steel plates with rubber vulcanized between them.Used mainly in lifting systems of self leveling platforms as shock absorbers and vibration dampers, shock pads may be used in other application requiring support of heavy loads without a rigid structure.

HI-TECH SHOCK CELLS : Hi-Tech shock cells (HSC) for offshore platforms was developed as a safe efficient boat landing system that can absorb energy in both deflection and shear. The shock cells can be manufactured with or without an eccentric bumper ring. The basic principle  of a shock cell is the adhesion of rubber to two concentric steel tubes.

Hi-Tech Elastomers shear fenders (HSHF) are designed to absorb energy through the stretching of the elastomeric component in the lateral direction while maintaining the ability to support heavy loads perpendicular to that movement. The shear fender also maintain a linear load vs. deflection characteristic throughout their usable range of deflection. 

I-TECH RUBBING STRIPS : Hi-Tech Rubbing Strip (HRS) can be used as a protection material for the boat and boat landing surface protection. HRS are available in many shapes and jacket leg fittings depending on requirement.

FEATURES: •Special rubber moulded chain used to prevent corrosion. •Extra moulded thickness provides high abrasion and durability. ADVANTAGES: •Safe and cost-effective. •Ideal for hazardous area. •Low maintenance cost. APPLICATIONS: •Specially useful for naval ships.

Eco-friendly (Made from used tires) Simple and fast to install,Maintain Large Clearance between jetty and Vessel,Provide long life against abrasion.Prevent ship’s hull from damage.Rugged body protects the fender against cuttingpuncturing.

Hi-Tech Quick Release Hook is a new type of ship’s mooring equipment for fast mooring and immediately releasing.    Features:  Each hook must perform tensile test and unhook test over 1.25 times of Design pressure, insure acceptance rate of the product is 100%. The hook could meet the various horizontal loads which its angle is lees than 55 degree.  Two connecting method between the foundation and jetty hook : bolt connection & welding .  Advantage:  Quick release under rated load  Stable design for hook head  Spark proof and insulating design for quick release hook used in hazardous zone.   Types:  Manual Quick Release Hook  Electric Quick Release Hook

Manufactured from Aircraft tyresSpecially moulded tyres.Long service life.Low maintenance cost.Used as solution for temporary andor emergency fendering system installations,Used for tankers, gas carriers, bulk cargo ships, fast ferries & other aluminum hull vessels.

HI-TECH MODULAR FLOATING SYSTEM : It helps to create all kind of floating structures of easy assembly and low cost, including the floating facilities for various customised applications. One can make floating structure such as mentioned below: • Floating docks • Floating platforms • Jet slide dry docks • Marinas • Pontoon bridges • Floating walkways • Water parks • Platforms for floating houses • Floating work platforms • Jet ski docks & swimming pools + floating platforms for games • Fishing farms & nautical clubs • Platforms for rigid and semi rigid longboats • Floating ports & piers • Floating dikes & landing docks • Floating supports & platforms of marine investigation

Available in 2 variants viz. Waveocean surface driven HMGP & Current driven HMGP,HMGPS can be deployed in single or multiple rings as per requirement.Can be used on vertical and diagonal members of the structures submerged in water.Can be used any structure members such as offshore structures which are submerged in water.

HI-TECH MARINE BUOYS : Hi- Tech has bought a technological breakthrough by developing steel- reinforced rubber buoys over the conventional MS, PE,GRP & FRP fabricated buoys. FEATURES :  •Low  weight  & Low maintenance •Flexible & Easy to handle •Sustaining stable  Load •Provide great buoyancy in deep water TYPES OF HI-TECH MARINE BUOYS : •HI-Tech Steel Buoys (HMB-S) •HI-Tech Rubber Buoys (HMB-R) •Hi-Tech PE Buoys (ATON SERIES) •Hi-Tech GRP/FRP Buoy (HMB-GRP/HMB-FRP) •HI-Tech Mooring Buoys  (HMB-M) •Hi-Tech Special Buoys   a. Catamarine Buoys for Fast Water River   b. Hose Support Buoy   c. Hi-Tech Aqua series Floats

FEATURES: •For any level of impact, Linear Motion Fender System (HLMF) provides equal absorption of energy. This system is completely customised and unique system which varies from project to project. •HLMF system has low reaction forces compared to conventional fender systems which renders lower hull pressures. ADVANTAGES: •HLMFs have non-tilt frontal panels and are positioned vertically. •HLMF system's design enables it to distribute the energy uniformly and has low reaction force and hull pressure. •Even at large berthing angles, there is no performance loss. APPLICATIONS: •Naval facilities. •High Tidal zones. •LNG & Tanker Terminals. •Monopiles/Soft Structures. • Ro-Ro & Fast Ferry Berths.

FEATURES: •Special subset of pneumatic fenders. •Performance can be adjusted by the air –water ratio. •Longer than deep draft channel/pontoon and are easier to reposition. ADVANTAGES: •Very low hull Pressure. •Prevent ship’s hull from damage. •Provide large contact area that distributes the load APPLICATIONS: •Used for submarines.    

HITECH PROTECTION BARRIERS : Hi-tech provides various types of marine protection barriers to protect marine assets. Security of marine assets has become necessary in recent times and hence a marine protection barrier is essential security equipment for NAVY ships and other vessels. Hi-tech marine protection barrier (HPB) is laid as a line of demarcation to protect the  maritime facilities. The fill system is extremely durable and environment friendly.  HPBs are the first line of defence for protecting the secured area from any harm arising from water bodies  including  protection from speed boats. it protects marine assets from terrorist activities not only on water surface area but also protect under water.  Hi-tech’s barrier range can be used as security barriers, fencing   barriers and even as demarcation barriers depending on the type of barrier selected.

Hi-Tech zip- out closure (HZC) is a subset of the HTE diaphragm closures that are designed with a metal dome sealed by rubber to the jacket leg, piling sleeves or piling with the purpose of being removed once the sealing of the tube is no longer required.

FEATURES: •Modular fendering system which provides most cost effective solution. •Can be engineered with options of conventional steel panel & UHMW-PE panels which are very light weight and maintenance free. ADVANTAGES: •Easy installation of the mounting bolts. APPLICATIONS: •Fendering system for minimum limited wharf area. •Ro-Ro jetties. •Multipurpose Berth. •Offshore structure applications.

FEATURES: •Modular fendering system which provides most cost effective solution. •Can be engineered with options of conventional steel panel & UHMW-PE panels which are very light weight and maintenance free. ADVANTAGES: •Easy installation of the mounting bolts. APPLICATIONS: •Fendering system for minimum limited wharf area. •Ro-Ro jetties. •Multipurpose Berth. •Offshore structure applications.

Hi-tech provides rubber moulded ladders which has dual function of a fender for small boats and also as ladder.  The rubber is durable, tough, weather resistance and also has high corrosion resistance. The steps are especially designing to be anti-skid. Our ladders are easy to install with low maintenance. Hi-tech ladders have low surface pressure and larger contact area which enable them to act as fenders for the smaller boats. Theseladders can be installed in areas where the traditional ladders face severe damage due to machinery, vehicle, forklift or boat impact. FEATURES :  •Durable •Tough •Weather resistance with high corrosion resistance. ADVANTAGES :  •Dual function as fender + ladder •Steps are anti-skid. •Available in various lengths as per requirement. APPLICATIONS : •Offshore platforms •Small boats

FEATURES: •Very robust and simple fender type. •Used to protect corners of piers where vessels are turning close to the structure. •Give little resistance by rolling contact rather than absorb the energy of berthing. ADVANTAGES: •Available in a single and multiple stacks •Reduce friction due to rolling •Virtually no maintenance required APPLICATIONS: •Narrow entrance •Dry dock entrance   

Oil Booms barriers are used to contain oil spills in the oceans. Floating property of oil on water helps the boom round up and contain oil and keep it from expanding and contaminating beaches, islands, and wetlands. The boom has  weight, floating tube, and tall wall-like structure to help keep the oil contained. Hi-tech offers different types of oil booms (HOB) which are actually solutions for oil spill response.  These oils booms are used for many oil spill response such as oil containment, oil diversion, oil deflection or oil exclusion. Containment Booming:   Placing a boom in a body of contaminated water for the purpose of holding or slowing the movement of contamination. Diversion Booming:          Placing a boom in a body of contaminated water for the purpose of diverting the contamination to a collection point. Deflection Booming:      Placing a boom in a body of water for the sole purpose of changing the course of the contamination. (Note: This method is used for contamination that is not intended to be recovered, and therefore not typically associated with oil spills) Exclusion Booming:          Placing a boom in a body of water for the purpose of blocking off a sensitive area from contamination.  

Hi-Tech Gangway is a equipment for people boarding & disembarking safely and favorably during oil tanker operating at modern size oil dock. Its is a necessary choice to adopt gangway to replace accommodation ladder so as to accelerate loading work of tanker and ensure safe boarding and disembarking . The Gangway almost become a necessary equipment as loading/unloading equipment.        Features:   Steady, safe, agile and continent operation. The electrical control system which have reliable quality and good performance. The wireless remote controller operation for convenient operation. Hosier / steel steel structure/ fire proof design standard.   Advantage:   Easy to maintain  Fireproof design  Rust & scale free