Back Back
Apfc Panels
Get Price Quote
Generally AC system have three basic loads, i.e. resistive, inductive and capacitive. In case of purely resistive load, the current and voltage are in phase. Whereas, in case of inductive load, current lags behind the voltage. In industries, most of the equipment and appliances are inductive in nature. In case of capacitive load current leads the voltage. Mostly capacitors are installed for power factor correction of system . Inductive or capacitive loads are termed as the reactive loads. In this loads active power can only be consumed in resistive portion of load, where the current and voltage are in phase. Reactive component of the load consumes reactive power which is necessary for energizing the magnetic circuit of the equipment and is not useful for work. Inductive loads are with two current components, one is active current & another is reactive current. Vector sum of these two power components (active and reactive) is termed as Apparent Power (measured in kVA). The ratio of active power (kW) to apparent power (kVA) is known as power factor. In case of resistive load kVAr (reactive component) is absent, so angle φ will be zero degree, hence power factor will be unity. For a inductive load the power factor will be lagging and for capacitive load the power factor will be leading. Thus it is clear that, if the power factor is different than unity (low power factor), more will be the kVA demand for same kW load. Most of the HT tariffs include kVA Demand charges along with Energy Charges, more the kVA demand for the same kW load more will be the electricity bill to consumer. Disadvantages of Poor Power Factor: Load draws high current for same value of useful power 1. Which results in increase in size of the switchgear, cable, transformer etc. All this adds to the cost. 2. High current causes increased power loss (I2R loss) in the circuits. The conductor temperature increases and hence the life of insulation gets reduced. 3. It increases voltage drop which affects different loads as below: Reduces the illumination of lighting lamps. Heating devices operates at reduced temperature, results in increased consumption & process time. It leads to nuisance tripping of Induction motor on overload. Advantages of Improved Power Factor: Reduces losses in the system, cables, lines, and feeder circuits and hence lower sizes could be selected. Improves system voltage & helps to all types of load to operate at rated capacity with designed output. System capacity Increases (kVA) for the same kW, permits additional loading. Range: APFC panels with & without series reactor for any capacity LT & HT system.
Mcc Panel
Get Price Quote
Due to our long experience and understanding for the requirement of industries, we have been able to offer our Industrial customers with an excellent solutions of MCC Panel Board. All these panel boards are manufactured under the supervision experts using optimum quality material and advanced technology. The raw material used in manufacturing our products is procured from trusted and authentic vendors of the market. Motor control centres (MCC) are simply a group of combination starters in one assembly. A combination starter is a single enclosure containing the Motor Starter, Fuses or Circuit Breaker, and a Device for Disconnecting Power. Other devices associated with the motor, such as pushbuttons and indicator lights, may also be included. Motor control centers are usually used for low voltage three-phase alternating current motors from 208 V to 600 V. Medium-voltage motor control centres are made for large motors running at 2300 V to around 15000 V, using vacuum contactors for switching and with separate compartments for power switching and control. MNR Electrical is the top manufacturer, dealer and supplier of MCC Panels in Hyderabad, Mumbai, Delhi and Bangalore and has many branches in the top cities in India. Salient Features:- Custom Design System: 3ph, 4 wire, 415V, 50 Hz IP Protection: IP 42 to IP 65 Fixed type, free standing, floor mounting Extendable to both sides Cubical type compartmentalized construction
Best Deals from Industrial Control System
Power Factor Correction Panel
Get Price Quote
This means loss and wastage of energy and heavy penalties by electricity boards. In case of fixed loads this can be taken care by manual switching of capacitors.However in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor by manually switching onoff the capacitors in proportion to variation of load within an installation. This drawback is overcome by using an APFC panel (Automatic Power Factor Correction Panel) which not only maintains a high power factor but also eliminates the need for constant manual intervention.
Plc Control Panel
Get Price Quote
Installation of modern packaging facility assists us in meeting standard as well as tailored packaging requirements of the patrons. In addition, our professionals ensure safe packaging of the products. We have automated systems to manage the sorting and packaging of all the products that are kept in the spacious warehouse. To look after this, we have hired veteran professionals. Features : Precision made Industrial application User-friendly
Control Panel Boards
Get Price Quote
1 Box (MOQ)
Quadrant Fire Control Components
Get Price Quote
Quadrant Fire Control Components are widely used in artillery weapons. Quadrant Fire Control Components that we offer are fabricated from the highest grade raw materials and latest technology. These are manufactured by skilled engineers as per the specifications provided by the clients. Also, our Quadrant Fire Control Components comply with set industry norms. Our name is mentioned among the leading Manufacturers and Suppliers of Quadrant Fire Control Components from Hyderabad, Telangana. Our prices are highly competitive.
Relay Panel
Get Price Quote
We manufacture and supply HT panels up to 33KV VCBSF6 Circuit Breaker Panels. We manufacture the panels with technically high qualified engineers and the technology we follow gives assurance to our customers to protect the complete electrical power system with high reliability and safety with excellence in performances. The Equipment has fully compartmentalized construction with IP4X5X degree of protection.
Conventional Fire Alarm System
Get Price Quote
In a Conventional Fire Alarm System, a number of call points and detectors are wired to the Fire Alarm Control Panel in Zones. A Zone is a circuit and typically one would wire a circuit per floor or fire compartment. The Fire Alarm Control Panel has a number of Zone Lamps. The reason for having Zones is to give a rough idea as to where a fire has occurred. This is important for the fire brigade and of course for the building management.
Electric Control Panel
Get Price Quote
Plc & ac drive panel we manufacture and supply a wide range of drive panels that can be availed at industry leading prices and also in customized specifications. These drive panels are used to monitor machines and provides on – site operating control of machines. A drive panel is used to save the power in the industries where there is huge power requirement. The drives are available in ac as well as dc options. Motor control centre (mcc) we manufacture and supply precision engineered industrial mcc panels. These customized mcc panels have created a higher demand among customers for having unmatched quality, excellent efficiency and long term durability. Designed to perfection, these are widely renowned for simple operation and low maintenance. These have the capacity to feed larger loads and are designed as per the client's specifications. The mcc panels are conventional to the relevant standards and are available with multiple power stabs that help in supporting high capacity industrial motors. We can provide number of vertical sections of motor control centers in different amps with mains and lug compartments. We provide controllers with manual or automatic means of starting or stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque and protecting against overloads or faults power control centre (pcc panel) we manufacture and supply of pcc panels (power control centre), which are used for diverse industrial applications and provide reliable and effective service. These panels are manufactured as per customer's specifications and requirements which very well meet with the industry demands. Power control centre is considered to be the heart of an electrical system in any industry. Therefore it shall offer users long term reliability, safety, low maintenance & testing time
Motor Control Center Panel
Get Price Quote
Access Control System
Get Price Quote
It can be a corporate world or a small business, the need of the hour is to allow or restrict access to restricted areas. This is where our Integrated Access Control Systems come in, with a wide range of access control readers and smart cards with turn style gates offering outstanding appearance yet reliable mechanical performance & universal system interface. The unit has been widely used to form fast lanes and can be integrated into a common security package to suit your specific security needs. It is our objective to offer prompt and personalized advice and to provide the best solutions to our client.
WPC Board
Get Price Quote
1 Piece (MOQ)
Electronic Tension Control System
1,200,000 Per Piece
Gas Purification Panel
Get Price Quote
GAS PURIFICATION PANNELS WITHOUT COLOUR we offer wide array of Gas Purification Panels. Our products are used for providing pure gas that is free from other impurities.
SOLAR PANELS
Get Price Quote
We are considered as noteworthy manufacturer, exporter and supplier of the best solar panels in hyderabad, andhra pradesh. Solar panels that we provide make use of solar power modules technology. Our solar panels are manufactured using state-of-the-art semi-auto manufacturing line with the latest solar cell technologies of monomulti crystalline and other materials. specialties high power modules using 156mm square multimono crystal silicon solar cells with 14% module conversion efficiencybypass diode to minimize the power drop caused by shadeanti-reflection coating to improve cell conversion efficiencyusing tempered textured glass, eva resin and weather-proof film along with an aluminum frame for extended outdoor usehigh-voltage output for grid-connected systemoutput terminal lead wire with water-proof connector applications solar power rackssolar power plantsremote village electrificationstreet and camp lightsmedical facilities in remote areasmicrowaveradio repeater stationsbattery charging water pumpingwater purification systemsremote village lightingsolar home systemstraffic signals.
SOLAR PANELS
Get Price Quote
Provided the products with cutting edge technology and of the highest quality. We have manufacturing the product range from 3wp to 300wp with annual capacity of 18mw and having expansion plan up-to 100mw.
Retrofit Emission Control Device
400,000 Per pice
1 Piece (MOQ)
Access Control System
Get Price Quote
The Access Control System, provided by us, is manufactured using advanced technology. We conduct diverse quality tests in order to ensure that our entire range is free from defects. High-quality and certified inputs are used for the production of our finished goods. We, as a trusted name, only select the certified vendors for procuring quality raw materials.
Electrical Panels
Get Price Quote
we offer electrical panels.
Access Control System
Get Price Quote
Filter by Localities
