Leather Cords
40,000 - 40,000 Per Rupees
We are offering leather cords. Ps daima and sons are indian manufacturer, supplier and exporter of a wider range of leather cords. Different kinds of leather are used to make a wide range of leather cords.
23/38 5 Meter OFC Speaker Cable
199 Per Pack
100 Meter (MOQ)
Best Deals from Electronic Cables
Speaker Cable
Get Price Quote
100 Piece (MOQ)
BELDEN 7814A CAT 6 UTP CABLE
13,500 - 15,000 Per Roll
1 Box (MOQ)
CAT6 Patch Cable
160 - 240 Per Meter
10 Roll (MOQ)
RG 217 RF cables
210 - 260 Per METER
10 Roll (MOQ)
Multicore Shielded Cables
Get Price Quote
Bola Leather Cords
Get Price Quote
Customers can avail from us high quality Bola Leather Cords at most affordable rates. Our Bola Cords can withstand adverse weather conditions and are highly durable. We fabricate the Cords conforming to the set industrial standards. We are a reliable Manufacturer & Supplier from Kanpur, Uttar Pradesh, and we ensure that customers receive their order of Bola Leather Cords within the stipulated time.
microwave Antenna RF Co-axial Cable assembly
350 Per piece
1 Piece (MOQ)
D LINK CAT 6 CABLE
3,450 Per Meter
50 Meter (MOQ)
ptfe rf coaxial cables
Get Price Quote
The company has cemented its position in the markets as a Manufacturer and Supplier of PTFE RF Coaxial Cables. The PTFE RF Coaxial Cables are manufactured using the best grade raw materials as well as advanced technology and latest manufacturing techniques. The PTFE RF Coaxial Cables can be availed at the market leading prices.
Dlink Cat 6 UTP 23AWG Outdoor Cable
9,200 Per Box
5 Box (MOQ)
CAT 6 CABLE
35 - 2,500 Per Meter
100 Meter (MOQ)
8471 BELDEN 2 core 16 AWG Twisted Pair Speaker Cable
84 - 85 Per Meter
500 M (MOQ)
Cat 5E & Cat 6 UTP Cable
Get Price Quote
UNEXA UTP Cables meet or exceed the requirements of TIA / EIA 568 A/B / IEC 11801. The cable standard provides performance of up to 250 MHz/500MHz and is suitable for 10-Gigabit Ethernet Category.Features Single Jacket Internal Cable Screened UTP Cable
CAT 6 CABLE
Get Price Quote
Braided Shield Cable
Get Price Quote
50 Meter (MOQ)
Classifications Cables with twisted pairs or quads with means for reducing effects of electromagnetic or electrostatic disturbances, e.g. screens Cable with a flexible connection The utility model discloses a cable, it includes a pair of heart yearn, the cladding is a pair of simultaneously the extrusion fashioned insulating layer outside the heart yearn, the cladding the shielding layer and the cladding of insulating layer the outer quilt of shielding layer, it is a pair. Double-deck aluminium foil high-speed signal line in band Similar The utility model discloses a belting double-layer aluminum foil high-speed signal wire which comprises core wires, anti-interference layers, ground wires, shielding layers and Mylar layers which are sequentially distributed from inside to outside, wherein each core wire comprises a conductor . Multi-pair data cable with configurable core filling and pair separation An improved twisted pair telecommunications cable according to the invention includes a plurality of twisted pairs of insulated conductors, and a substantially flat configurable pair separator disposed between the plurality of twisted pairs of insulated conductors along a longitudinal length of Data cable with cross-twist cabled core profile Cables including a plurality of twisted pairs of insulated conductors and a jacket surrounding the plurality of twisted pairs of insulated conductors, the jacket including a plurality of protrusions extending away from an inner circumferential surface of the jacket toward a center of the cable. Cable barrier layer with shielding segments A cable that has a cable core that includes at least one conductor that is surrounded by insulation. A barrier layer substantially surrounds the conductor's insulation. The barrier layer may include a plurality of shielding segments. Each of the shielding segments extends substantially around. Eight-type wire and production process thereof The invention discloses an eight-type wire, which comprises four groups of twisted-pair wire pairs, a linear bracket, a tinned copper wire shielding layer and a sheath; a linear bracket is arranged between the four groups of twisted-pair wire pairs; two groups of twisted-pair line pairs are . Discontinuous cable shield system and method Implementations of a discontinuous cable shield system and method include a shield having a multitude of separated shield segments dispersed along a length of a cable. The separated shield segments can serve as an incomplete, patch-worked, discontinuous, ‘granulated’ or otherwise perforated shield . 2-core shielded cable and wire harness A 2-core shielded cable and a wire harness is provided. The 2-core shielded cable is equipped with two insulated electric wires, a metal film which is provided along a length of the electric wire so as to cover the two electric wires, and a sheath which is formed around the metal film in a filled . Shielding elements for use in communication cables Cables incorporating discontinuous shielding elements are described. A cable may include at least one twisted pair of individually insulated conductors, and a shield element may be positioned adjacent to the at least one twisted pair. The shield element may include a plurality of segments. Shielded pair cable and a method for producing such a cable The present invention concerns a cable for signal transmission and a method for producing such a cable. The cable comprises one or more wire pairs extending in a longitudinal direction, each of said wire pairs including two conductors each separately surrounded by a dielectric layer. At least one. LIGHTWEIGHT BRAIDED SHIELDING FOR WIRING HARNESSES TECHNICAL FIELD This invention relates to braided shielding for a wire harness, which braided shielding is flexible and lightweight. More particularly this invention relates to a braided wire harness shield which has an open weave configuration and provides protection against electrical transients resulting from lightning strikes, and provides protection against electromagnetic interference (EMI). The braid exhibits lower (better) surface transfer impedance than conventional braided shielding for frequencies below 50 MHz. Surface transfer is an intrinsic parameter of a shield that corresponds directly to shielding effectiveness and lightning protection capability. BACKGROUND ART Wire harnesses which are used in aircraft, ships and in-ground installations are typically encased in a protective shield which is formed from multi-strand carriers which are braided onto the wire harness. The purpose of the shield is to protect the wire harness against lightning strikes and EMI. The conventional approach to providing the aforesaid protection has been to provide maximum area coverage for the wire harness with the braid, typically 85 to 95%. This approach has been taken in part because of the perceived need to provide high frequency (above 50 MHz) EMI shielding for the wire harness. The resultant braid has been conventionally formed with a relatively large angle of strand carrier application onto the wire harness, i.e., typically about 60 degrees. The weight of the shielding is a significant factor in the overall weight of the wiring components in a facility which requires such shielding. The use of the wire harness braided shielding has increased in recent years due primarily to two considerations, which are: 1) the use of electronic systems to replace mechanical devices, especially in aircraft flight controls; and 2) the use of composite materials which utilize graphite to replace metal structures in aircraft and other craft We have determined that electronic equipment can be protected against high- frequency EMI by filtering the input and output wiring using light weight components, such as pin-filter connectors, and that such filtering is sufficient to protect against frequencies greater than 50 MHz in most applications. Thus, a braided shield providing high frequency protection is unnecessary, and may only add weight and stiffness to the wiring assembly. These weight and stiffness characteristics are not desirable, especially in aircraft applications. Wire shielding is required to provide low frequency shielding for lightning protection and to preclude interference due to low frequency external electromagnetic fields. The lightning requirement stems from large transient voltages that result when lightning current flows in a resistive structure. The external field requirement arises from the fact that filter components for low frequencies are physically large and therefore impractical for applications where weight is critical, and furthermore, that such filters may interfere with proper functioning of the equipment. Therefore, wire harness shielding is needed to prevent interference from low-frequency sources. It would be desirable to provide a wire harness shielding braid which is both flexible and light-weight, and yet provides the necessary shielding protection. DISCLOSURE OF THE INVENTION This invention relates to a braided electrical shielding for an electrical wire harness, which braided shielding consists of an open braid that provides coverage for less than the entire outer surface of the wire harness, and therefore produces a lighter and more flexible braided shielding. A primary application of this invention is in lightweight lightning protection of electronic equipment installed in moderately conductive structures, such as a graphite aircraft fuselage. The invention can also be used in conjunction with non-aircraft applications which require electromagnetic protection of electronic equipment, whether installed on metallic or non-metallic structures. The percentage of wire harness coverage provided by the shielding of this invention can be as low as about 60%, and can go as high as about 70% without unduly sacrificing the desired reduction in weight and flexibility. In order to obtain the desired flexibility and weight reduction, the carrier strands of the braid are laid onto the wire harness at a relatively flat angle in the range of about eighteen degrees to about twenty four degrees, and preferably about twenty degrees, relative to the axis of the harness. The aforesaid flat braid carrier angle results in a braid which has between three and eight picks per inch, with a typical number or picks per inch being four. Present day government specs, as defined in MIL-C-27500, call for a minimum of 85% coverage of the wiring harness by the braid, and call for a braid angle in the range of eighteen to forty degrees. In practice, one cannot achieve a minimum coverage of 85% with a carrier angle in the lower end of the aforesaid range, therefore, the braid carriers are laid onto the wiring harness at angles which are at the higher end of the aforesaid range and even above the forty degree angle, up to about sixty degrees. The resultant braid will typically have about eighteen picks per inch, and is quite stiff and heavy, and does not improve low frequency performance. An unexpected result of using the open braid shielding of this invention is that shielding formed in accordance with this invention, as compared with the more dense shielding of the prior art, provides improved transfer impedance, which improvement is a function of the DC resistance of the braid. DC resistance is essentially the parallel combination of all strands in the braid. The lowest resistance is achieved by a maximum number of strands in the shielding, and equally important, minimal strand length in the braid. Minimal strand length can only be obtained by decreasing the angle of laying the braid on the harness. The ability to maintain a braid application angle that will ensure securement of the braid on the wire harness, and which also minimize strand length, so as to decrease shielding weight, is an important advantage to this invention. The necessity of achieving minimal practical coverage while meeting performance requirements in the low frequency range of DC to 50 MHz, without sacrificing adhesion of the shielding to the harness, is accomplished by utilizing a braid which has from three to eight picks per inch (a standard shield braid has eighteen picks per inch). Utilizing a braid with less than about three picks per inch results in negligible weight savings, and therefore is not seen to be particularly desirable, since a main advantage of the invention is to obtain a lessening of wire harness weight. The light weight braid of this invention does not display degraded performance at higher frequencies. The surface transfer impedance for the lightweight braid of this invention is surprisingly better than the standard heavier braid for frequencies below 50 MHz. The lightweight braid of this invention will reduce lightning-induced voltage transients by at least 25% under all conditions of use. It is therefore an object of this invention to provide an improved wire harness shielding which is lighter in weight than conventional shielding. It is another object of this invention to provide a wire harness shielding of the character described which utilizes an open braid which covers less than the entire outer surface of the wire harness. These and other objects and advantages of the invention will become more readily apparent from the following detailed description of several embodiments of the invention when taken in conjunction with the accompanying drawings in which: BRIEF DESCRIPTION OF THE DRAWINGS FIG. 1 is a plan view of a closed braid wire harness shield formed in accordance with the prior art; and FIG. 2 is a view similar to FIG. 1 but showing an open braid wire harness shield formed in accordance with this invention. DETAILED DESCRIPTION OF SPECIFIC EMBODIMENTS OF THE INVENTION Referring now to FIG. 1 , there is shown a portion of a braided shield 2 for a wire harness that is formed in accordance with the prior art. The braid employs six stranded carriers 4 that are braided onto the wire harness at an included angle d of sixty degrees. The resultant braided shield has eighteen picks per inch and covers essentially the entire outer surface of the underlying wire harness, i.e., typically about 95%. This braided wire harness is heavy, and weighs about 0.048 lb/ft when 0.0063 inch diameter carrier strands are used on a one-half inch diameter wire harness. The large angle of the braid also results in a very stiff wire harness which is difficult to manipulate and fit into tight locations, which will be found in aircraft such as helicopters and the like. The stiffness also results in problems covering wire harnesses which have different diameter portions. FIG. 2 shows a portion of a braided shield 6 which has been formed in accordance with this invention. The braid 6 employs six stranded carriers 8 which are braided onto the wire harness at an included angle β of twenty two degrees. The resultant braided shield has eight picks per inch, and includes a regular pattern of openings 10. The braided shielding 6 covers about 65% of the wire harness, and when 0.0063 inch diameter carrier strands are used, weighs about 0.025 lb/ft when braided onto a one-half inch diameter wire harness. The shielded wire harness is quite flexible and is relatively easy to manipulate into place. A weight saving of more than about 40%, as compared to the prior art braided shielding, is achieved. It will be readily appreciated that the braiding of this invention will provide substantial weight savings, and will provide the necessary lightning strike and EMI shielding for wire harnesses on which it is braided. The flexibility of the braided wire harness aids in properly placing it in tight locations which are typically found on aircraft and in other applications. Since many changes and variations of the disclosed embodiment of the invention may be made without departing from the inventive concept, it is not intended to limit the invention otherwise than as required by the appended claims.
shielded screened cables
Get Price Quote
We offers extensive expertise in design, development and manufacture of high quality power, control, instrumentation, thermocouple extensioncompensating and communication cables conforming to Indianinternational standards and customer specifications.
CAT6 Patch Cable
90 - 120 Per piece
100 Piece(s) (MOQ)
cat 6 patch cord rj45 , bare copper, 24 awg
Flexible Shielded Cable
60 Per Meter
100 Meter (MOQ)
shielded screened cables
Get Price Quote
Being the top notch manufacturers and suppliers of the Shielded Screened Cables, we are the most trusted in the market. The quality of our products is commendable and the concerns regarding safety of the consumers at the base level is always kept in mind while testing. The consumer base of our industry has ever been on the increase due to the prices we sell our products at. The materials are supplied in large numbers to our customers. Available : Cable sizes 7/36, 14/76, 0.52mm, 1.02mm, 1.52mm, 2.52mm.
Single Core Shielded Cables
Get Price Quote
Strict payment procedures are followed by us keeping in mind that no third party is involved in this; rely on us and we will offer you to make payments online or offline keeping all your details safe and secured. With the assistance of sophisticated packaging system and adroit professionals, we are able to provide flawless lot of products as we ensure complete safety during packaging. Features : High conductivity Easy to install Dimensional accuracy
Shielded Cables
400 - 420 Per Kilogram
CONDUCTOR:POWER-FLEX® Shielded cables are manufactured using Electrolytic Grade 99.97% purity copper with more than 100% conductivity. The conductors drawn and bunched according to class 2 or class5 of IS:8130/1984.INSULATION:The bunched conductors are insulated with specially formulated PVC compound. The compound confirms to IS:5831 Type AOnline spark testers ensure fail proof high voltage test by employing non destructive form of testing at six times the rated voltage.SCREEN:The insulated cores are laid up and shielded with polyester tape, overall screened with aluminium mylar tape, metallic side down in contact with tinned copper drain wire of size 0.5 mm for reinforcement, then overall shielded with polyester tape.SHEATH:The shielded cable is overall sheathed with PVC Type ST1 of IS:5831.OPTIONS: Multi Core shielded together. Multi Pair shielded together. Multi Pair individually and collectively shielded.
SY-SFTP-CAT6E SFTP Copper Cable
15 - 25 Per Per mtr
Shielded Armoured Cable
150 - 250 Per Meter
USB Data Cable Football Wire
100 - 2,000 Per Bandal
500 Piece (MOQ)
telecom cable
4,499 Per Meter
We are offering a qualitative range of Telecom Cable to customers throughout the country. We are committed to delivering the best to our buyers. Hence, we keep a check on the quality during various stages of production. The cable can be availed from us in various lengths including 300 LMR, LMR 200 and LMR 400. Buyers can avail the Telecom Cable from us at highly affordable rates.
Double Asbestos Braided Cables
10 Per Meter
100 Meter (MOQ)
FTP 6-CCA-SS-22 Patch Cord Cat 6 Lan Cables
Get Price Quote
1 Piece (MOQ)
Standard : Compliant with Cat.6 class E(220MHz) requirements: ISO/IEC 11801 ed.2.2, Compliant with Cat.6 component standard IEC 60603-7-4, Compliant with Cat.6 component standard IEC 60603-7-5 Fulfilled the standard IEC 61935-2:2010.
Syrotech Cat-6 Cable
20 Per Meter
500 Meter (MOQ)
