Decorative Waterfalls
100,000 - 500,000 Per Piece
1 Piece (MOQ)
Brass Neutral Terminals
Get Price Quote
We are manufacturer of brass neutral terminals as per custom design. Specifications: material - high grade free cutting brass - free cutting brass is 319 type (i) or - free cutting brass as per bs 249 type (i) or - free cutting brass cuzn40pb2 h110 according to en 12168 - any special brass material composition as per customer’s requirement. finish, plating available brass current terminals and brass neutral terminals, available with us, are well finished with natural, nickel plated, tin plated, silver plated and customized finishes to serve the different tastes of our customers.
Best Deals from Electrical Components
Platinum Screen Printed Electrode
10 - 50 Per Pack
100 Piece (MOQ)
monitoring electrodes
Get Price Quote
armour rod
1,000 - 1,100 Per Set
200 Set(s) (MOQ)
Armour Rod
Aquasol AMEPHIGT pH Industrial Electrode
4,271 Per Piece
1 Piece (MOQ)
COMPAIR 2 PIN COIL
350 - 425 Per pcs
25 Piece (MOQ)
this is molded coil 230 vac coil avilable in different voltages id - 15 , od - 40 , ht - 32 mm
stainless steel welding electrode
Get Price Quote
12X15 Drum Core
Get Price Quote
1 Piece (MOQ)
Notes Drum Chokes are normally provided with heat shrink sleeve covering & can be encapsulated on request. RoHS 3 compliance is available on most products, subject to our confirmation. Specifications subject to change without notice. Document Number: PEPL-CAT-13 Release: 01/06/2009
Brass Electrical Components
5 - 500 Per Piece
1000 Pieces (MOQ)
Being a trusted Manufacturer, Exporter & Supplier, we are instrumental at offering a wide range of Brass Electrical Components. These Brass Electrical Components are constructed using high grade Brass and cutting-edge technology. Company manufacturing electrical products demand these Brass Electrical Components owing to their superior quality, hassle free working, long life, efficiency and rust & abrasion resistance. Clients can avail Brass Electrical Components in different sizes and dimensions at nominal prices. Highlights : Long life Hassle free working Rust & abrasion resistance Available in different specifications
HT & LT Stay Set
Get Price Quote
Avail the wide range of HT & LT Stay Sets that is widely used in the diverse industries. Being one of the chief Manufacturers and Suppliers in the industry, we offer the HT & LT Stay Sets at the market leading prices to the clients. Our HT & LT Stay Sets find their applications such as in Electrical Lines, etc. Specifications M.S. Round 16mm MS Channel 75x40mm (L/W) Conforming to IS: 2062/1992 Grade-A Quality Sectional details as per IS: 1732/1989 for Ms Round Sectional details as per IS: 808/1989 for MS Channel with Red Oxide Primer Coating
Platinum Rhodium Thermal Electrodes
Get Price Quote
1 Kilogram (MOQ)
Eaton Vickers solenoid coil
Get Price Quote
We are suppliers of Solenoid coils of Vickers,Yuken,Rexroth etc. We can also manufacture coils as per samples. We can supply coils as per the parts number.
PURE COPPER EARTHING ELECTRODES
Get Price Quote
5 Piece (MOQ)
Details : Used 100% copper for long life. Designed for fast fault current dissipation. Easy & Fast installation on site. Most suitable for soil condition with PH value 5.0 ft 8.0. Moisture booster chemical bags provided for low earth resistance.
Brass Pin
5 - 25 Per Piece
3 Piece(s) (MOQ)
electrical pins
Get Price Quote
Availed in the most vivid and acceptable kinds of standards, the offered range of these Brass Pins has been in wide demand. We have processed this range by making the use of high grade certified brass. Clients can avail this pin range from us in customized versions and are given this range in the most comprehensive and industry leading prices. Following mentioned below are the major features of this pin range: Sturdy composition Dimensional accuracy Resistant to corrosiveness Other Information Minimum Order Quantity: 5000 Piece(s)
Plastic Wedges for stabilizing large Drums, Coils
306 - 405 Per Piece
1000 Piece (MOQ)
Secondary Clevis
Get Price Quote
500 Piece (MOQ)
Current Interrupter CI-50
Get Price Quote
The new Cl-50 Current Interrupter manufactured by Tinker & Rasor is shipped ready to use. It is fitted in a heavy duty aluminum case and is designed for rugged field use. The front panel allows access to the sturdy terminal lugs for quick and easy clamping. The Cl-50 has the latest integrated circuitry construction for long life expectancy in field environments. The Cl-50 Current Interrupter has a timing span range from 5 to 45 seconds in any combination through the continuous range function controls. The operating weight is only 6 pounds (approximately 2 pounds without a battery). The Cl-50 uses a readily available 12 volts battery.
Brass Electrical Socket and Pin
Get Price Quote
Application: Energy Meters; Control panels; distributions boards; MCB switches; Electrical switches, Plug & Sockets; Fans & lighting, Air Conditioner, Electrical Appliances .
Chemical Earthing Electrodes
Get Price Quote
100 Piece (MOQ)
We are counted among the well known Manufacturers, Suppliers and Exporters of Chemical Earthing Electrodes. The Electrodes we make available dissipates lightning strikes and discharges. EPABX Systems/RF Antennae, Transformers HT/LT, Panels Distribution/Power factor, CNC m/c, Testing Equipment /System, Uninterrupted Power Supply, Generators, etc. are some of the components required for the proper functioning of our Earthing Electrodes. One can obtain these at market-leading rates from us. Statutory Requirements ofEarthing/Grounding of System/equipmentAs per Indian Earthing Standard IS 3043:1987EPABX Systems/RF Antennae Etc Provision should be there for at least one distinct separate dedicated body Earthing in order to provide safety aspects for shock to human life and charge dissipation of spurious voltage generated by the system because of surges. Provision should be there for at least one distinct separate dedicated Neutral Earthing in order to provide localized Neutral to make Neutral strong and provide path to residual voltage of Neutral. The Neutral-Earth voltage should be measured, and it should be low as 2 -3 volts or less as possible. In case of high Neutral-Earth a separate localized Earthing point should be connected to Neutral of the system Transformers HT/LT In case Transformers HT/LT : Provision should be there for at least two distinct separate body Earthing in order to provide safety aspects for shock to human life. The Neutral should be Earthed with at least two distinct separate interconnected Earthing in order to achieve sufficient current dissipation and consistent/low neutral – earth voltage.Panels Distribution/Power factor In case of Panels for Distribution/Power factor : Provision should be there for at least two distinct separate bodies Earthing in order to provide safety aspects for shock to human life. CNC m/c In case of medium and high rating CNC m/c : Provision should be there for at least two distinct separate body Earthing in order to provide safety aspects of electronic circuit and for shock to human life. It provides safety of electronic circuit against surges/spikes generated by the induction current. The Neutral should be Earthed with at least one distinct separate Earthing in order to achieve sufficient current dissipation and consistent/low Neutral – Earth voltage.Testing Equipment /System Provision should be there for at least one distinct separate dedicated body Earthing in order to provide safety aspects for shock to human life and charge dissipation of spurious voltage generated by the system because of surges. The Neutral-Earth voltage should be measured, and it should be low as 2 -3 volts or less as possible. In case of high Neutral-Earth a separate localized Earthing point should be connected to Neutral of the system. Uninterrupted Power Supply Provision should be there for at least one distinct separate dedicated body Earthing in order to provide safety aspects for shock to human life and interruption of sinusoidal charge dissipation of spurious voltage generated by the system because of surges. The Neutral-Earth voltage should be measured, and it should be low as 2 -3 volts or less as possible. In case of high Neutral-Earth a separate localized Earthing point should be connected to Neutral of the system. Generators In case of medium and high rating generators : Provision should be there for at least two distinct separate body Earthing in order to provide safety aspects for shock to human life. The Neutral should be Earthed with at least two distinct separate interconnected Earthing in order to achieve sufficient current dissipation and consistent/low neutral – earth voltage In case of Extra high rating generators: Number of Body/Neutral earthing points should be increased in order to cope up with high spurious voltage generated by the equipment.
brass lamp holder pin
1 - 2 Per Piece
1000 Pair (MOQ)
induction heating coil
2,000 - 200,000 Per Piece
1 Piece (MOQ)
We are offering capitalizing on our technical expertise, we offer an array of induction heating coils that are fabricated from apex quality raw material. These induction heating coils are vital components of radio frequency (rf) induction heating systems.
emitting electrode
Get Price Quote
We are well-reckoned as the Manufacturer, Exporter & Supplier of Emitting Electrode from Maharashtra, India. We are equipped with state-of-the-art production unit for precisely engineering the Emitting Electrode. Our Electrode is tested on features of quality, strength, performance, etc. before being approved for delivery. Customers across the world can rely on us for delivering any order of Emitting Electrode within the allocated period of time. Our company is the renowned Manufacturer, Exporter & Supplier of Emitting Electrode from Maharashtra, India. Our offered finest quality Emitting Electrodes are manufactured by experts from top grade factor inputs, these are highly durable in nature. We are equipped with state-of-the-art production unit for precisely engineering our products. Owing to our extensive market experience, we are able to offer excellent quality Emitting Electrodes, which is suitable for removing dust particles from hoppers effectively. Our offered Electrodes are tested on features of quality, strength, performance and other quality parameters before being approved for delivery to our valuable clientele. Owing to their superb finishing, these are highly resistant to corrosion and abrasion. As a reliable <b>Emitting Electrodes Manufacturers from Thane</b>, we are offering our products Electrodes at highly affordable rates in the industry within allocated period to our patrons.
Zinc Anodes
Get Price Quote
100 Kilogram (MOQ)
Electric Potential Capacity and potential details of anodes are as under: Open Circuit Potential : -0.95 V (Ag / AgCl reference cell) Anode Capacity : 780 Ah/kg Consumption Rate : 11.25 kg/A-yearMaterial Testing Anode material testing is carried out in accordance with ST-VAL-12:2005 in an NABL accredited laboratory. Cut piece samples of the material are sent to laboratory for analysis of chemical composition. Homogeneity of test material is ensured by random sampling and multiple sparks on individual samples. Report of the analysis, duly verified by the laboratory, is maintained for each anode sample.
Toroidal Transformer Coils
Get Price Quote
Description : Rogowski Technology of Current measurement With its over 20 years of experience in Toroidal Technology Salzer- Engineers have pioneered the design, development and manufacturing of Rogowski coils and we have been supplying the Rogowski Coils to various OEM’s worldwide. A Rogowski coil, named after the German Physisct Walter Rogowski, is an electrical device for measuring alternating current (AC) or high-speed current pulses. It consists of a evenly wound helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil. The winding is done on a non-magnetic/non-metal former of constant cross sectional area. The whole assembly is then wrapped around the straight conductor whose current is to be measured. The speciality is there is no metal (iron) core. Features : Rogowski coils have been used for the detection and measurement of electric currents for decades. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current. Even though Rogowski Coils are low power sensors, the protection system is immune to external electromagnetic fields. Rogowski Coil can replace CTs for protection, metering, and control purposes. Rogowski Coils are accurate, small, light, and easy to install. They do not saturate. Rogowski Coils provide superior differential protection for power transformers, substation bus bars, generators, and large motors. Rogowski Coils do not create hazards for personnel with open secondary, as Conventional current transformers. Specifications : Range : Frame 1- Upto 2000AMPS. Range : Frame 2- Upto 4000AMPS Range : Frame 3- Upto 6400AMPS. Frame 3 is provided with Two Rogowski Application : Sudden short-circuit testing Monitoring arc furnaces Lightning test facility Monitoring weld quality Protection of slip-ring induction motors Electromagnetic launchers On-line insulation discharge monitoring Transient measurements.
Earthing Electrodes
Get Price Quote
100 Meter (MOQ)
Reusable EEG Electrodes
3,500 Per Set
1 Set (MOQ)
Mild Steel Suspension Clamp
730 Per Piece
50 Piece (MOQ)
Double Plate Tower Earth Clamp
20 - 500 Per pieces
500 pieces (MOQ)
This double plate clamp is suitable for bonding copper conductor to steel surfaces in areas where a more robust version of the single plate is required such as where cladding may be installed later or the complete clamp will be covered by concrete. The double plate clamp is fixed by drilling a hole in the steelwork and securing it with the bolt provided.
