Electronic Universal Testing Machine Dealers in Shirol, Kolhapur (1 products available)

• Loading accuracy as high as + 1%.• Straining at variable speeds to suit a wide range of materials.• Printer & PC graphs enable study the behavior of the materials.• Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing   of test specimen.• Continuous roll autographic recorder supplied as standard to enable study of the behavior of  materials• Simplicity in reading because of digital readouts.• Wide range of standard and special accessories, including load stabilizer.• Easy change from plain to threaded and screwed specimens.• Large effective clearance between columns enables testing of standard specimens as well as structures.• Simple controls for easy of operation.• Robust straining frame of an extremely rigid construction.• Safe operation ensured be means of safety devices.• Fully enclosed and protected pressure transducer.  • RS 232 serial port to transfer data to computer for analysis/storage evaluation etc. • Manual control & release valve operation.   Application :   FIE Electronic Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also conducted.   Principal of Operation : Operation of the machine is by hydraulic transmission of load from the test specimen through pressure transducer to a separately house load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit corresponding to the load exerted by the main ram.Simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously. Machine consists of :   Straining Unit :   This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper crosshead is rigidly fixed to the table by two strenthened columns.     Special Accessories :• Load Stabilizer• Printer• Plotter• Brinell Test Attachment• Electronic Extensometer • Piston Movement Resolution of 0.01 mm • Electronic Load Pacer• Shear Test Attachment • Software Packages• Mechanical Extensometer • Wide range accessories offered on request at    additional cost.• Due to constant R& D specifications & features    are subjest to change without notice.• The dimensions given above are approximate.     The lower crosshead is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating.An displacement scale with a minimum graduation of 1mm, is provided to measure the deformation of the specimen.Tension test is conducted by gripping the test specimen between the upper and lower cross-heads and the table.The lower cross-head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.       Control Panel :   The control Panel consists of a power pack complete with drive motor and an oil tank, control valves and electronic display unit.     Power Pack : The power pack generates the maximum pressure of 200 kgf/cm2. The hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.   Hydraulic Controls : Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.   Electronic Control Unit : (Series Universal 2001-UTE)   Microprocessor based panel incorporating state of art technology wiyh following features.   - Front panel membrane type key board for machine operation with numeric keys for data entry.- 7- segment display.- Data entry with numeric keyboard of test parameters including speds, rupture % peak, preload, modulus data,  test data & specimen data etc.- 20input data set strorage, 50 results storage maintains sata results during power off.- Batch test facility for generating batch & statistic result using same data set.- RS 232C serial port, Optional windows based software available for...- On line graph on PC. Data analysis, statistics, point tracing superimposing graphs to compare with standard,    zooming graph etc.Printer port for printer interface with ...• Graph & result printout. Test certificate printout .• Batch Certificate printout .Simple statistic printout.     Optional Software Packages on PC : The UNIVERSAL 2001 - UTE series control panel can be hooked to any PC using RS-232 communication port. FIE offers different exhaustive application, Window based software packages with real time graph on PC to enable the user to effectively evaluated different parameters.   The feature include :   • Real time graph, User friendly software.• Extensive graphics on screen for curve plotting, magnification and zooming.• Software features includes Graph comparison, point tracing facility. Different units selection for load &   displacement.• Statistical evaluation includes with water fall dig. Mean deviation, frequency distribution, Skew dig., Histogram.    Also calculates max. value, min. value, Mean value, Variance, Standard Deviation. (Other statistical parameters   on request). Selectable batch & statistical printouts.• Evaluation of wide range of user selectable parameters such as % elongation, % reduction in area, young's   modulus, yield stress, proof stress etc.• Software packages for shear, Bend, Torsion, Rubber, Textile testing etc.• Custom built application software to suit customer requirements.     Accuracy and Calibration :   All FIE Electronic Universal Testing Machines are closely controlled for sensitivity, accuracy and calibartion during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British standards. 1610 : Part1 : 1992 and IS : 1828 : Part1 : 1991.FIE Electronic Universal Testing Machine comply with Grade "A" of BS : 1610 : Part1 : 1992 and class 1 of IS-1828-Part-1:1991. An accuracy of +1% is guaranted from 2% to 100% of the capacity of the machine.Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.     UTE Panel/PC Controlled Machine, Servo Controlled Model available.It is with motorised control valve & automatic operation with given loading /elongation rate.