Axiom Technologies Regent Park, Kolkata, West Bengal

TECHNICAL DETAILS:•  Capacity upto 750 m3/hr.•  Total Head upto 90 mtrs. •  Operating Pressure upto 26 Bars•  Max. Stem Length 6.0 mtrs.•  Maximum Temp. 100° C APPLICATIONS   Condensate recovery. Circulation of industrial water. Acids & acidic water in metal & sewage treatment plants. Light hydrocarbons.      M.O.C.   Available in CI, Bronze, WCB, CF8, CF8M, A-20, R55, H-B, H-C. or any other special alloy   FEATURES     Centrifugal single stage pump with downward axial suction and radial discharge directly flanged to the discharge pipe.    The shaft is supported from its upper end by a grease lubricated ball bearing. Lateral supporting of the shaft is obtained through radial bush bearing, made from various anti-friction material, chosen according to the specifications of the fluids handled.  Vapour proof construction.   Radial bearings are lubricated either by the pumped liquid or through clear liquid from an external source. Lifting from intank / outside constructions along rivers, lakes, water sheds.

Range : Capacity         Up to  100 m3/h Head               Up to  340 m Temperature  Up to  1200C Material          Bronze, Cl Pressure          Up to  40 bar   Applications: Rigid, reliable construction  High pump efficiency  Low maintenance cost  Mechanical seal or gland packing 

Range : Capacity         Up to  210  m3/h Head               Up to 100  m Temperature   Up to  3500C Speed              Up to  3000 rpm Material           Cast Steel                            Stainless Steel. Applications: This pump is ideal for equipments viz. Boilers, Industrial heating system, Mixer & reactors treatment of fats, Cooking plants, Drying chambers for textile industry.  

Applications:  Dewatering of mines, power plants, construction sites Suitable for use in septic tanks Discharging sewage in hotels, malls, multiplexes, hospitals and industrial parks   Key Features:  Double outer casing & good heat convention make it possible to run the pump dry or in a snore condition Submersible up to 20 m depth & have no suction limitations Can be installed vertical, horizontal or even upside down   Applications:  Dewatering in hydropower plants, mining and quarries Dewatering from construction sites, ships, ship buildings, dry docks, flooded areas   Technical Details: Capacity           : Upto 1200 m³/ h Head:                : Upto  103 m Power range    : Upto 56 kW Solid handling : 7 mm for J Series                                               56 mm for JS Series

We offer a wide assortment range of PIRANHA submersible grinder pump. These pumps come with shredding action for cost effective handling of effluents and sewage pumping in industrial and domestic establishments.   Technical Details:  Capacity: Upto 24 m³/ h Head: Upto 70 m Power range: 1 to 11 kW Key Features: Unique shredding system capable of shredding clothes & plastic bags Thermo control system using thermal sensors in the stator to give a warning & to switch off motor in the event of excessivetemperature Easy installations are possible where large ground undulations are present Advantage of small discharge line   Applications:   For discharging sewage and wastewater from houses in scattered settlements, hilly terrain, farm houses, clubs, hotels, canteens, restaurants and industrial units For handling effluents in slaughter houses For handling wastewater in food processing and pharma plants etc

Applications: Sewage, Effluent Pump for disposal. Process Pump, Circulation Pump Dewatering Pump Bilge and deck wash Engine cooling Loading & transfer of oils, spirits, gas oils etc. in marine. Dewatering swamps, trenches, basements, construction sites, swimming pools. Lift irrigation & horticulture.   Range  Capacity           Up to 350 m3/h Head                 Up to 60m Suction head   Up to 8m Material             Bronze, Cl Solids                Up to 41mmdia. Viscosity           Up to 100mm2/sec   Features: Very compact Minimum Number of parts Built in Non-Return Valve Grease packed Bearings Built in Priming Chambers Pumps with Mechanical Seals     Models KGEN11-3, KGEN11-4, KGEN12-5, KGEN12B-5, KGEN12-6, KGEN16-3, KGEN16-6, KGEN14-8,  

Features   Easy maintenance Low maintenance cost Suitable for vertical arrangement Standard mechanical shaft seal (DIN 24690) No shaft alignment required Outstanding hydraulic performance High efficiency impeller Closed impeller with back vanes providing axial balancing of impeller loads

Capacity    : 1000 m3 / hr.                                           Material of Constructions: Press.        : 22      bar.                                                Casing     SS & many Other Alloys Viscosity    : 1,00,000cps                                           Rotor /Idler    Many Options Temp.        : 300 Degree Cent.                                  Shaft & Pin    Many Options                                                                                         Bushes        Steel, Carbon, Bronze & Many others

Range:                                         Material of Constructions: Capacity    : 9.5 m3 / hr.                                           Press.        : 25 bar.                                                                        Casing                    Nod. CI Viscosity    : 100 mm2 / sec.                                                         MOC                        Rotor /Gear –Hard. Steel Temp.        : 250 Degree Cent.    

Range : Capacity         Up to  100 m3/h Head              Up to  340 m Temperature  Up to  120 D.C. Material         Bronze, Cl Pressure         Up to  40 bar  Applications: Boiler feed water, cooling  & hot water circulation High pressure for hydraulic processes, Sprinkler irrigation Spraying in horticulture,. Water transfer in high rise building

Range : Capacity         Up to 350 m3/h Head               Up to 160 m Pressure          Up to 16 bars Temperature    Up to 2000/C Speed              Up to 3600 rpm Material          Cl, NCl, Cast Steel, Stainless                         Steel, Nobler Alloy Applications: Transfer of corrosive liquids in chemicals, pharmaceuticals, sugar, paper, dyes, textiles, environmental engineering.   Handling of hydrocarbons, organic and inorganic chemicals condensate DM water.  

Series Combi Norm ( CN ) Heating jacket optional 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing Grease or oil bath lubricated bearing Robust Shaft Design-Extended life time Sealing: Packing or Mechanical Seal Range : Capacity           Up to 1500 m3/h Head                 Up to 100 m Pressure          Up to 16 bars(Working) Temperature   Up to 200 D.C Speed              Up to 3600 rpm Material            Cl, NCl, Cast Steel,  Applications: Water Circiulation Cooling Tower Water Hot & Chilled Water Heating System Circulation Water Purification Plants Sea Water

Applications: Transfer of petroleum and volatile fluids viz., motor sprits, kerosene, diesel and other solvents. Marine as bilge fire fighting and refrigeration pumps.   Features:  Self Priming, Back-Pull-Out, Modular design Built In Vacuum Pump with Axial Adjustment Large Air removal Capacity-Short Priming Time High Efficiency Impeller-Outstanding Hydraulic Performance