Gas Plants Dealers in Kolkata (74 products available)

• Type: Medical Gas Outlet
• Material: B.S TYPE
• Application: Hospital
• Color: White
• Feature: Excellent Quality
• Country of Origin: India
• Color: Yellow
• Gas Type: oxygen / nitrogen / vacuum / air
• Condition: New

Offer on the Product : Free shipment on bulk purchase. Contract Manufacturing Service. Discount pricing on volume purchase.

The Plant Air separation process starts with compression, followed by drying and purification of Air. Additional compression (followed by expansion) may be included to produce large amounts of refrigeration to deliver some portion of the Air separation unit (ASU) products in liquid form. Electric motors are used to drive the compression equipment, power is also required for process heaters, Instrumentation systems and Cooling Water Systems. Electrical power is just as much a raw material as air when manufacturing atmospheric industrial gas products. Cost of electricity is the largest single operating cost incurred in air separation plants. Products can be transferred to customers in either of the three modes – (1) Direct pipeline supply of gases, (2) From on-site storage tanks topped up with “bulk liquid” thru’ trailers, (3) Compressed gases in cylinders. Our Background We operated Air Separation Plants since 1973 and gradually grew up today as the largest merchant market share holder in Eastern India. Decades back, we aligned ourselves with Global Technological transformation from Classical plants to power efficient Tonnage Plants and continuously remained upgraded with International norms. In 2013 Air Water Inc., a major player in Japan acquired 51% of our market share. Since inception in 1929, AW Inc. have credibility record of designing and setting up exceeding 120 ASUs of various sizes and different product configurations. Thus, today it is the combined skills that has further increased the strength and ability.

We have a strong security system that helps us to make online transactions possible without getting worried about the security. You need to share your details with us and we make sure that the details are kept confidential. Backed by a productive network, our company is able to cater to buyers all over Kolkata(India) and other Kolkata(India)s with ease.

• Color: Red
• Type: Gas Release Warning
• Flash Period: 1.2-1.5 Sec
• Operating Voltage: DC 24V
• Brand Name: Fyrax
• Minimum Order Quantity: As per Requirement

• Display: Analog
• Material: METAL AND PLASTIC
• Brand Name: MEDITECH GLOBAL
• Model Name/Number: BPC FLOWMETER
• Usage/Application: Hospital
• Warranty: 6 MONTH
• Accuracy: VERY GOOD

• Country of Origin: India
• Material: Metal
• Feature: Easy To Use, Good Quality, Good Strength, Light Weight, Long Lasting, Low Maintenance

Regulator

• Material: Plastic
• Application: Hospital,Clinic
• Weight: 2-4 Kg
• Type: Oxygen Sensor
• Minimum Order Quantity: 1 Piece

We have carved a niche as an esteemed Manufacturer and Supplier of Humidifier Bottles. We manufacture Humidifier Bottles by employing the sophisticated technology. Compact in design and high in quality, our Humidifier Bottles have become favorites of many medical establishments. Customers are eased with the easy availability of Humidifier Bottles. Highlights High precision designDurableConvenient to useEconomically priced

• Capacity: 350 Cylinders/ Shift

The unique feature of the of the company is their experienced Project team, capable to provide detailed insight into manufacturing technologies and operational techniques developed through long years of direct manufacturing experience. In the recent years our project team had set-up LPG Cylinder plants for valued foreign Government client to meet their specific requirements.

• Usage: Oxygen Cylinder
• Flow Rate: 0-15 L/min
• Display: Analog
• Accuracy (Flow rate): +- 3%
• Country of Origin: Made in India
• Tube Cover Material: Poly Carbonate
• Body material: Stainless Steel
• Add-ons: Humidifier Bottle
• Knob Material: ABS

Modern steelmaking relies heavily on the use of oxygen to enrich air and increase combustion temperatures in blast furnaces and open hearth furnaces as well as to replace coke with other combustible materials. During the steel making process, unwanted carbon combines with oxygen to form carbon oxides, which leave as gases. Oxygen is fed into the steel bath through a special lance. Oxygen is used to allow greater use of scrap metal in electric arc furnaces. The Company has also set up 3 units of 400 SM3 per hour for production of oxygen for the above purposes. The plant will operate 24 hours in a day and 330 days in year. The installed capacity of the plant works out at 97,92,000 NM3 per year.

The Hydraulics International, Inc. (HII) 3G-series gas booster is an air driven reciprocating piston assembly. The non-lubricated gas boosting section is available in single acting / single stage configuration only. The drive section uses outside source of drive gas such as compressed air to cause the reciprocating action of the gas section piston. Each boost section contains integral inlet and outlet check valves. HII gas boosters are non-contaminating. The unit provides complete separation between the driving gas/air and the gas being compressed. No electrical connections are required.

• Material: Brass/ Plastic
• Application: Medical Center
• Display: Analog
• Input Pressure: 60 psi
• Application: Hospital
• Tube Cover Material: Poly Carbonate

• Usage: Oxygen Cylinder
• Flow Rate: 0-15 L/min
• Display: Analog
• Accuracy (Flow rate): +- 3%
• Brand Name: Medrubb
• Material: Brass
• Country of Origin: Made in India
• Tube Cover Material: Poly Carbonate
• Body material: Brass
• Add-ons: Humidifier Bottle

• LINE SIZE: 1/2
• PRESSURE: Upto 40 bar.
• TEMPERATURE: 60°

We request you kindly consider giving us an opportunity to serve your esteemed organization. We are confident that given a chance by our performance we will exceed your expectation. We are looking forward to a long and fruitful association with your esteemed organization.

• Color: Customized
• Brand Name: Perfect Medical Products
• Country of Origin: Made in India
• Usage: Oxygen Cylinder
• Packaging Type: Box
• Body Material: Plastic

• Model: IN-O2
• Brand Name: INMED
• Minimum Order Quantity: 1 Piece

• Product Code: CS-L-080
• Category: ANESTHESIA EQUIPMENTS
• SPECIFICATIONS: H.P TUBE 2 MTR WITH P.I ADAPTOR/PROBE

• Feature: With Flowmeter
• Certification: ISO
• Country of Origin: Made in India
• Water Capacity (Litres): B-Type (10 Litre)
• Working Pressure: 250 kgf/cm2
• Type of Cylinder: Filled
• Purity: 99.7%

• Material: Mild Steel
• Pressure: High
• Cylinder Capacity: 40 L
• Cylinder Material: Mild Steel
• Outside Diameter: 219 mm

• Capacity: 1000-5000 L, up to 150000 L, 5000-10000 L
• Material: double walled pressure vessel - inner shell type 304 stainless steel and outer jacket carbon steel
• Surface Finishing: outer surface painted
• Storage Material: Liquid Oxygen
• Corrosion Resistance: Yes
• Feature: Highly Durable

• Pressure: 250 Kg/Cm2
• Brand Name: I.H. Bakir
• Usage/Application: Industrial
• Material: Brass and MS
• Temperature: 200 to 300 Degree C
•  :  

FA Valve is a direct pressure valve that regulates Oxygen flow to human body (in operation or in case of asthma patients). Produced in Parameters being 25mm, 28mm & 32mm, this FA Valve is Supported with Jacketed flowmeter (JFM) and 200ml & 250ml Humidifier Bottle. We are a noted Manufacturer, Exporter and Supplier of FA Valve, based in India.

Versatile range of gas delivery Pendants, Single Vertical Single Horizontal Double Arm Movable Pendants, Equipped with 515 amp. Electrical socket and switches, Up to four Gas services and seven numbers gas outlet, Equipped with 515 amp. Electrical socket and switches, Option for IV Stand and Infusions Pump Stand.

• Application: Hospital, Clinic
• Portable: Yes
• Finish Type: Polished
• Body Material: Plastic And Stainless Steel
• Flow Rate: 0 - 15 Liters Per Min

Safe and economical, the kamrup industrial gases limited. Oxygen plant, with an efficient expansion engine, that lowers operating pressures , cuts power consumption and adds to safety. A molecular sieve assembly for separation of moisture and carbon dioxide is another money-saving device in our plant. It removes acetylene and other hydro-carbons from the process air, thus eliminating the need for separate acetylene absorbers. More, it saves on recurring caustic soda costs. Capable of simultaneously producing oxygen and nitrogen, our plant has an internal compression liquid oxygen pump to fill dry gaseous oxygen in cylinders.

• Country of Origin: Made in India
• Capacity: 500 CFM
• Power Consumption: 2 kW
• Maximum Pressure: 2 Bar