Novoflex Marketing Pvt. Ltd. Beleghata, Kolkata, West Bengal

They can be fixed around cables, cable harnesses, pipes or tubes with Cab-lok cable ties. Write on labels with indelible marker pen.

Turn Power off before installing or removing terminal. Strip wire insulation 12". Firmly grasp wires, making sure insulation ends are even and tightly bundled. (Wires may be twisted or untwisted.) Lead stranded wires slightly. Slip the connector over wire tips. Turn connector onto wires in clockwise direction until secure. To remove, turn connector counter - clockwise.

Material : PVC - Threaded, Heat Resistant & Insulating

The Standard nylon cable ties may be affected by explosure to ultra-violet(UV) light i.e from direct and indirect sun light.UV exposure eventually result in material oxidation, diminishing the mechanical performance characteristic of cable tie. Novoflex UV Resistant Nylon Cable Ties are manufactured with special additives imparting resistant to UV radiation that prolongs the life of cable ties.  

Material : UL Listed Nylon 6.6 with Flammability Rating of UL - 94 V - 2 resistant to UV Radiation, fungus & corrosion.

They are designed for use in a diverse range of packing and tying applications where secure but provisional fastening is required. These ties have found successful use in a wide spectrum of industries such as electrical, electronic, agriculture, food, luggage, packing and so on. Available in various product lengths as well as in rolls of 100 mtrs.lok Ties

They provide a new convenience in initial assembly of wires, plus versatility for easy inspection, removal, repair or changing of wires. Wire bundles are secured in moments with a fingertip twist. These clips cut costs by speeding assembly. Available in 5 standard sizes covering cable bundle diameter ranging from 4.0 to 20.3 mm.

Quick, easy and secure way to connect wires together. How to Use: Turn Power off before installing or removing terminal. Strip wire insulation 1/2". Firmly grasp wires, making sure insulation ends are even and tightly bundled. (Wires may be twisted or untwisted.) Lead stranded wires slightly. Slip the connector over wire tips. Turn connector onto wires in clockwise direction until secure. To remove, turn connector counter - clockwise.

Novoflex Trefoil Cable Cleats are used to clamp high voltage single core cables in a trefoil formation, thus giving your cables a Magnatic Symmetry, and allowing free and easy flow of electrical currents through your cables. They eliminate Electromagnatic Interference and Electromagnatic Induction,thus preventing degradation and loss of electrical currents of your cables and also protect them from lightening discharges   High Mechanical Strength Resistant to most Chamical,Acids and Alkalies Long Service Life High Flexibility Superior Design Novoflex Trefoil Cable Cleats are supplied with Bolts, Nuts and Washers

Teardrop style nose simplifies insertion and provides increased holding power. Snap into 2.5 mm dia hole of up to 1.6 mm thick board.

Novoflex Tamper Evident Seals are an ideal way to protect your genuine and branded products, which may have important ratios/qualities of inputs, from contamination, and fake products. Customizable with your Company's Name or Logo, and Non-Repeat Serial Numbers, these seals have a unique design to reveal even the slightest attempts of tampering. Usage: Chemical Bags, Bulk Drugs, Pharmaceutical Companies, Money Bags, Postal Bags, Cash Boxes, Lockers, Trucks, Transportation, Exports.

They are designed to protect the life line of electrical / electronic appliances and equipments, machine tools by absorbing twist, pull, push and flex on power supply cords. They are installed easily by squeezing cord bushings on power cables and pushing it into the hole at chassis entry point,and securely anchoring, insulating and protecting cords.These eliminate the need to tie or knot cords and the product.

Polyamide cable glands with spiral to protect cables from breakage / right angle bending. Used on flexible cable and wires on portable application, on moving parts of machinery and where electrical apparatus is used. Soft, Spring provides protection against conductor damage ensuring that the appliance will continue to work. Spiral ensures centering, sealing, strain-relief and automatic match to diameter of cable.   Technical Data: Suitable for unarmoured, plastic insulated cables Operating Temparature: -25° C to +85° C Deflection temparature under load at 66 psi 151° C Tensile strength 595 Kg/cm2 Volume resistivity 1.5 x 1012 ohm-cm Automatic Centering & Fixing Corrosion resistant Vibration Proof Indoor or Outdoor use Minimum Assembly time Economically Priced Compact Streamline Construction Maximum Cable Diameters Wide range of cable Diameters Impact Resistant High stability Resistant to Salt water, gasoline, alcohol, oil, grease, easter keyton ether, benzine, common solvent, weak acids & weak alkalies High Tensile Strength Self Extinguishing Self lubricating

Material : Polyamide 6 (Nylon 6)

Designed to lift wires off board to avoid hot components and minimize transient interference. Cable & wire bundles can be secured simply by a fingertip twist. The main feature of these clips is that they can be installed easily & quickly by just pushing into a predrilled hole in PCB frame, chassis, sidewall electronic / electrical equipment in moments. Available in 6 standard sizes.

Novoflex Stainless Steel Ties have superior and high tensile strength and is made from corrosion resistant stainless steel grade 304. The unique and self locking mechanism gives easy and hassle free security in locking. The stainless steel ties are a quick, efficient and ultimate way of securing cables in extreme conditions and hazardous areas. Used both in indoor and outdoor areas such as the Petrochemical, Ship building, Power Stations, Food Processing Industries, Mining, Offshore and other aggressive environments Ensuring a long service life, these ties are Water, Chemical, UV radiation resistant and Non Flammable.   Features: High Tensile Strength Weather Resistant Resistant to a large number of aggressive chemicals Material : Stainless Steel Grade 304 Corrosion Resistant. Anti Magnetic Operating Temperature : -80°C to +538°C Max Degree of Hardness : (VPN) 190

Made from stainless steel Grade 304, these buckles are Resilient, Corrosion Resistant and can be easily assembled.  

An economical and easy way to apply cable harness wrapping that protects wires, cable tubings etc. from abrasion. It ensures a neat, quick & economical cable bundling. It is used mainly to create wire harnesses for electrical, electronic, telecommunication, automobile equipment wiring. When wrapping, the bundle of core branches can be taken out as required. Available to cover cable bundle diameter ranging from 1.5 mm to 178 mm. Standard rolls of 30 meters.

Operating Temperature : -20° C to +85° C.

They are designed for use with most standard sheet metal card cage systems and can be used with virtually all major card support systems. It is attached by means of rivets to cards of 1.6 mm thickness and operate by lever action against card guide or mounting bar-providing both easy insertion & removal .

It is a two piece all plastic blind rivet that securely joins two or more materials of varying thickness of materials. Generally suitable for fastening most materials including metal, wood, hardboard, rubber, glass and specialty plastic. They provide positive locking and are vibration resistant.

The Slide Secure design allows for easy removal and facilitates repairs. The larger base on slide secure side provides easy identification of mounting end. The support is installed easily by hand and no tool, screw, bolt or nut is required for mounting.

Operating Temperature : -25° C to +85° C continuous. 115° C intermittent.

The are designed to insulate the head of the screw from the PCB while providing desired spacing between PCB and chassis. The PCB mount head snaps in to maintain spacing even when the screw is removed. Available in two standard spacing heights of 9.5 and 19.1 mm .

This clip is designed to lift wires and keep them away from hot components on the board. The adhesive backed clip is installed quickly and wires can easily be routed or rerouted.

Novoflex Adhesive Backed Tie Mounts are used to anchor wire bundles or cables to walls, ceilings, plates, panels, or any other structure. No tool is required for installation. Simply place the Adhesive-Backed Mount on the desired surface, and secure the cables with Cable-Ties.

Novoflex Screw Type Tie Mounts are used to anchor wire bundles or cables to walls, ceilings, plates, panels, or any other structure. The Saddle Design provides Maximum Stability to wire bundles. To apply, simply fix the Mount to the desired surface with a screw, and secure wire bundles with Cable Ties.