Gate Valves Dealers in Bbd Bag, Kolkata (51 products available)

• Country of Origin: India
• Material: Brass, Carbon Steeel, Cast Iron, Cast Steel, Gun Metal, Stainless Steel
• Certification: ISI Certified, IBR , NON IBR
• Number Of Way: 2way
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Technics: Hard Sealing

We are stockist and manufacture of CS gate Valves

• Country of Origin: Made in India
• Brand Name: Unick
• Hand Wheel: ASTM A216 Gr.WCB
• Size: 55 mm
• Usage/Application: Industrial
• Material: Mild Steel
• Media: Air

We offer the following types of valves: Gun Metal Globe Valves, Tanker Gate Valve. Forged stainless steel steam trap. Bronze Valves. Cast Iron Valves & Pipes of all types.

• Material: Mild Steel
• Color: Silver
• I Deal In: New Only
• Country of Origin: Made in India
• Application: Industrial
• Rust Resistant: Yes
• End Connection Type: Flanged
• Valve Size: 15 mm to 100 mm

• Feature: Advantages of using gate valves: Good shutoff features Gate Valves are bidirectional and therefore they can be used in two directions Pressure loss through the valve is minimal The major drawbacks to the use of a gate valve are Etc.

Gate Valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed. The disk of a gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A gate valve can be used for a wide range of liquids and provides a tight seal when closed.

Type: Gate Valve Design STD: As per API 6D, API 600, BS 1414 Face to Face: As per ASME B 16.10 Flange: AS per ASME B 16.5 Testing STD: AS per API 598, ISO 5208 Size: 15mm TO 300 MM Seat: Replaceable Pressure Rating: Class 150# / Class 300# / Class 600# / Class 900# End Connection: Flanged End MOC: Body: WCB, CF8, CF8M etc. Gate: Ca-15, CF8, CF8M etc. Trim: 13% Cr., SS 304, SS316

• Application: Industrial
• Brand Name: ZOLOTO, WJ , NETA
• Size: 25MM UTPO 50MM
• Tensile Strength: 330-400 mpa
• Hardness: 58-62 HRC
• Surface Finishing: Polished

We are offering sluice valve c.i.d.f sluice valve as per is: 14846-2000(pd) ,p.n-10,p.n-16. Having g.m internals, aisi 410, ss spindle, flanged and drilling to is: 1538 flat faced.

Gate ValvesWe supply gate Valves, also referred to as the Sluice Valve that opens up by lifting a gate/wedge and is at times used to restrict the flow of fluids as either it opens up or shuts up completely. When open it does not restrict the passage of flow and as a result it leads to low friction loss.Characteristically the rising stem used for visual indication of valve position, non rising stem used whereint he vertical space is restricted and the bonnets, be it union,bolted or pressure seal, each one is designed to efficiently function as leakproof closure for the valve body. We supply gate valves of standard dimensions and also make sure that our manufacturers make use of high quality cast iron, cast carbon steel, gun metal, stainless steel, alloy steels and forged steel.

• Features:: Dimensional accuracy , Precisely designed and Sturdy construction

For the complete client satisfaction, we are providing a huge array of Forged Steel Gate Valve. This Forged Steel Gate Valve is easy to install and ideal to use for hydraulic fittings. Also, the demand of our gate valve is increasing day by day for its high performance and less maintenance requirement.

• Features: High durability, Latest technology, Best grade material.

• Valve Size: 50 mm
• Material: Cast Iron
• Features: Excellent finish, High tensile strength, Corrosion resistant
• End Connection Type: Screwed
• Temperature Of Media: Medium Temperature
• Usage/Application: Industrial

Ductile Iron Cast Iron Cast steel valves from 25 mm dia upto 2000 mm dia, for portable water sewage, like Gate Valve, Non- Return Valve, Air Valve, Butterfly Valve etc.

• Type: Cast Iron Sluice Valves
• Material: Cast Iron
• Application: Gas Fitting, Water Fitting
• Weight: 10-15kg, 15-20kg, 20-25kg, 25-30kg, 5-10kg
• Color: Black, Blue, Grey, Orange
• Condition: New, Used
• Pressure: High, Low, Medium
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality
• End Connection: Butt Weld, Flanged, Screwed, Socket Weld Ends

We deals in supplying of wide range of Sluice Valves.

• Material: CCS
• Usage/Application: WATER / STEAM
• Pressure: 700 Psi g 
• Model Name/Number: AV278
• Size: 25MM TO 65MM

• Country of Origin: India
• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm
• Type: Motorized Gate Valve
• Material: Alloy Steel, Carbon Steel, Forged Steel, Stainless Steel
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Weight: 10-15kg, 15-20kg, 20-25kg, 25-30kg, 5-10kg
• Color: Black, Brown, Grey, Sky Blue, White
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting
• Condition: New
• Pressure: High, Low, Medium
• End Connection: Butt Weld, Flanged, Screwed, Socket Weld Ends
• Power: 220V AC / 415V AC / 400V AC / 440V AC
• Media: AS PER REQUIREMENT
• Temperature Of Media: AS PER REQUIREMENT

• Type: Double Flange
• Material: Cast Iron
• Certification: ISI MARK
• Color: Black
• Country of Origin: India

We are a reliable and notable Manufacturer, Exporter and Supplier of high quality Manual Slide Gate Valve based in Kolkata. Using latest machinery and technology, we make sure that Manual Slide Gate Valve is durable, works efficiently and have longer service life. We offer a range of gate valve, non- rising gate valve, sluice valve, cast iron sluice valves, check valve, dual plate. You can purchase optimum Manual Slide Gate Valve in green or black color from us at reasonable prices. We always deliver all orders on time.

• Finishing: Polished
• applicable: handling hot water and steam
• Size range: 20mm to 1500mm
• Turbidity: upto 5000 ppm
• Temperature: not more than 45 deg C

• Material: Cast Steel
• Corrosion Resistance: Yes
• Media: Water
• Automation Grade: Manual

Material isolation valves Stock® has developed a Knife Gate Burner Line valve in accordance with the National Fire Protection Association (NFPA) standard 85. The standard requires burner line isolation at the pulverizer and at the burners to provide safety during the operation and maintenance of pulverized fuel firing systems. Stock® Knife Gate Valves (KGV) are specially constructed valves designed for extreme service. This ability to isolate portions of the burner line allows routine maintenance to be performed safely. These valves are also used for the isolation of material feed downspouts located between the pulverizer and feeder, allowing safe access and maintenance of the feeders without exposure to dangerous hot gas. Stock® Knife Gate Valves are designed for adverse conditions. They are made to handle high velocity mixture of air and pulverized coal.

• Valve Type :: Non Rising Stem
• End Connection :: Flanged
• Working Pressure :: PN16 (PN25 available on request)
• Working Temperature :: Upto 70º C
• Test Pressure :: Body – 1.5 x PN, Seat – 1.1 x PN
• Application :: Potable Water Distribution, Raw Water, Effluent systems, Irrigation, Fire Protection, Pumping systems,Industry, Cooling Water systems

SIGMAFLOW Resilient Seated Gate Valve is of lightweight design and construction of ductile iron offers a robust and durable extended life performance. Valves can either be used above ground or buried service applications and are maintenance free. The valves seal 100% leak tight. The waterway is clear, unobstructed and free from pockets to allow smooth flow of water.

micro limit switch box, Butterfly Valve Fittings, Gate Valve Fittings

forge steel gate valve, HIGH PRESSURE, temperature pneumatic valves

Sluice Valve, bends fitting, cast steel flanges, elbows fitting

cokes, Boiler Fittings, Lifting Tackle, Electric Tools

Ductile Iron Valves, Cast Iron Fittings, Cast Iron Valves

Bib Cock, Check Valves, Foot Valves, Pillar Cock, plastic taps, Showers