Metal Testing Equipment Dealers (587 products available)

• Type: Automatic
• Certification: CE Certified
• Application: Torsion Testing
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Warrenty: 1 Year

Torsion Testing Machine is designed for conducting Torsion and twist tests on various metal wires, tubes, sheet materials. Torque measurement is by Pendulam. We are a unique entity in the industry, actively committed towards providing an optimum quality range of Torsion Testing Machine.

• Type: Torsion Testing Machines
• Weight: 100-500kg
• Color: Grey
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

• Capacity: 10 NM, 25 NM, 50 NM, 100 NM
• Parameter: Computerized Torsion Spring Testing Machine KIC- TST-100-C,
• Mode of Testing: Motorised
• Motor: Stepper Motor with Drive
• Test Method: 5 Step Method Measures Torque and Angle Rotation Values At 5 Programmed Parameters
• Torque Sensor: Strain gage based Torsion Transducers
• Load Measurement Units: Unit selection in PC software for Load measurement in Lbs in, NM, KgM,
• Applications: Torsion and Twist Tests
• Torque Resolution: 0.001 for 10 & 25 NM and 0.01 NM for 50 & 100 NM sensor
• Torque Accuracy: +/- 0.5% of FS
• Test Options: Choice of fully automatic as well as Manual Mode.
• Test Capability: Torque Test with Angle input, Angle Test with Torque as input, Spring Rate,
• Test Speed: Selectable from 0.01 to 1 rpm.
• Speed Accuracy: Better than 0.5%
• Angle measurement: Continuous measurement facility with resolution of 0.01 deg, max upto 99.99 degs.
• Tare: Auto or Anywhere Below Overload Setting
• L.C. on Angle: 0.01 Deg
• Display: Numerical & Graphical Display on PC monitor
• PC Configuration: Suitable with Windows 7 or 10 OS
• Safety: Emergency Stop, Over Travel Protection, Over Load protection with alarm.
• Power Supply: 230V ac +/_10%, 50 Hz, 1 KVA
• Size: 800 mm(L) x 350mm(D) x 400mm(H) nominal, subject to change as per design update

• Model No: PRO-UR-VT-M
• Usage: Industrial
• Li Rechargeable Batteries: 2 AC Adapter 1 USB Cable 1 Plastic Tool Case 1 Manual
• Ultra-thin Metal Shell Weight: 0.68 kg
• Resolution: 800x480 mm
• Power Source: Battery

• Country of Origin: India
• Type: Gold Testing Machine
• Brand Name: Lada
• Warranty: 1 Year
• Machine Material: Carbon Steel
• Shape: Rectangular
• Machine Structure: Horizontal
• Condition: New
• Driven Type: Electric
• Voltage: 220V
• Usage: Gold Melting, Testing Center
• Weight: 38 Kg
• Accuracy: +_ 0. 1 % In Homogeneously Melted Sample S
• Model No.: Lada 100Si Pin
• Analysis Range: 1ppm to 99.99%
• Sample Form: Solid, Powder, Liquid
• Tube Voltage: 5kv - 50Kv(USA)
• High Voltage Power: 0 - 50kv SPELLMAM(USA)
• X - Ray Tube Current: 0microA
• Camera: HD Camera
• Detection Type: Si Pin (USA
• Filters: Selectable Customized Switches
• Resolution: 135+ - 5ev
• Multichannel Analyzer: KEY - DMCP
• Sample Chamber size: 380x380x60(mm)
• Test Time: 10 - 60sec
• Size: 480x480x390mm
• Measuring Element: 7 2elements from Sodium (na)to Uranium (u) Between all the Elements Eg

• Brand Name: Global Vision
• Accuracy: 0.05% to 0.10% +/-
• Weight: 45 Kg
• Model: EDS 8800 SDD
• Analysis Range: 1ppm to 99.99%
• Sample Form: Solid, Powder, Liquid
• Tube Voltage: 5KV - 50KV
• High Voltage Power Supply: 0-50 KV
• Filters: Selectable Customized Switches
• Detector Type: SDD (Amptek USA)
• Resolution: 135 +- 5 eV
• Multichannel Analyzer: Multi Channel Simulation
• Sample Chamber Size: 560x360x100 (mm)
• Test Time: 30 sec - 100 sec
• Measuring Element: From Sodium (Na) to Uranium (U) between 72 Element
• Analysis Software: Qualitative and Quantitative Analysis Software
• External Dimension: 600x400x300 (mm)
• Packing Dimension: 670x620x650 (mm)

Remote viewing camera system for internal inspection of cast, forge, machine components. It is a non destructive instrument for qc dept for checking the end products either 100% inspection or random inspections. Camera probe may be rigid type or flexible type depends on application requirement.

• Width of Sample: 70 – 90mm
• Thickness of Sample: 0.1-2mm
• Least Count: 0.01mm
• Overall Dimension (approx.): 450 x 500 x 500mm
• Net Weight (approx.): 20 Kg

Electromech Engineers Erichsen Tester is designed to carry out Erichsen Cupping Test on metals. Quick clamping and manual operation facilitates faster and trouble-free working of the machine.   FEATURES User Friendly. Table model, no need of foundation. Simple lever system for changing load Light weight, Simple design, Compact Size.

• Type: Karat Meter
• Certification: CE Certified, ISO 9001:2008
• Color: Grey
• Condition: New
• Automatic Grade: Automatic
• Power Source: Elecric
• Warrenty: 1year
• Usage: Gold and Silver Testing Including detection of Iridium , Ruthenium and Osmium

Instruments used in assay offices and hallmarking institute for material analysis of gold and precious metals must meet the strictest of specification. Besides gold content analysis, it is necessary to be able to determine other precious metals or prohibited substances. Well established in the industry, X-ray fluorescence analysis offers an excellent alternative to the widely-used fire assay method (cupellation) for analyzing precious metals and their composition – without damaging the item. The high end measurement system FISCHERSCOPE X-RAY XAN 250 was developed specifically for high precision analysis of precious metals as required for hallmarking and assay offices.

Compliance with following International Standards: As per IS: 516, IS: 9399, BS: 1881, ASTM C78 100 kN Capacity flexural machine with Digital Load Indicator cum controller.

• Voltage: 415 V
• Power: 0.25kW
• Capacity: 100Nm
• Torque Ranges: 20, 50, 100Nm
• Test Speed: 0.5RPM
• Phase: 3 Phase

• Dimesions: 250 x 150 x 419mm
• Specimen Thickness: 0.80mm / 1/32"
• Max specimen width: 190mm
• Conical mandrel: 1/8 - 1 ½" (3.2 – 38.1 mm)

The conical mandrel bend tester is used to determine properties of a coating. Resistance to cracking detachment from its substrate and its elongation during the test. Conical mandrel test is also known as standard method for assessing the flexibility and the adhesion properties of coatings when these are subjected to bending stresses This is accomplished by bending the test material around a conically shaped metal bar. The conical mandrel bending test is a commonly used for testing for painted or coated panels.

• Driven Type: Electric
• Automatic Grade: Automatic
• Power: 1-3kw
• Application: Industrial
• Voltage: 110V
• Weight: 100-500kg

We are the prominent Manufacturer & Supplier of high performance Digital Torsion Testing Machine. Fabricated using high-grade parts and components, our Digital Torsion Testing Machine is acknowledged for excellent performance, high strength, accurate results and longer service life. Our machine is thoroughly inspected by our quality analysts and complies with the set standards. We make available our Digital Torsion Testing Machine at market leading rates.   Features : 5 Digit 7 Segment ½ inch Red LED Display for LOAD Indication 4 Digit 7 Segment ½ inch Red LED Display for Angle of Rotation 2 Digit 7 Segment ½ inch Red LED Display for Number of Rotation Selection of Units Kgm or Nm for load Selection of Units Deg or Rad for Angle of Rotation Real Time Clock for report generation Password to safeguard unauthorized access for calibration and other important settings Multifunction Keyboard to select the parameters Data storage of last 25 Test Reports. The data of all the settings and reports is in memory even if power is absent. Report Printing facility on DOT MATRIX 80 column printer Rs232 communication facility(optional) Potential free NO contact(rated 2A @ 230Vac) to START/STOP TEST cycle. Safety Fuse Link(20mm) rated 230V,1A provided inside the controller   NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

• Type: Erichsen Cupping Testing Machine
• Certification: ISO 9001:2008
• Condition: New
• Automatic Grade: Manual
• Driven Type: Electric
• Warranty: 1year
• Brand Name: TEI
• Thickness: 1.2 Mm
• Surface treatment: Polished
• Width: 70 Mm
• Minimum Order Quantity: 1 Piece

We, Aditya Instruments supported by rich industry experience, are manufacturing, supplying and trading Computerized Torsion Testing Machine. The testing machine we offer is manufactured using optimum quality mechanisms and high-tech machines following industry norms and standards. Our products are widely used for testing torsion. Our Wire Torsion Testing Machine has world-class features like High efficiency, excellent performance and longer service life. These are used in numerous industries for testing. Clients can obtain this testing equipment from us at reasonable prices. Our machinery is manufactured by following all the industrial standards national and international. Just connect with us for the world-class testing machinery range.

• Type: Torsion Testing Machines
• Weight: 100-500kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Digital
• Warrenty: 2years

• Type: Cast Iron Bed Plates
• Material: Cast Iron
• Shape: Rectangular
• Thickness: 300
• Certification: ISI Certified
• Length: 10ft
• Application: Industrial
• Grade: AISI, ASTM
• Color: Grey
• Finishing: Polished
• Width: 1500 mm
• Feature: Fine Finishing

• Country of Origin: India
• Brand Name: Goldstark
• Type: Si PIN Detector
• Intended Use: Energy Dispersive X-ray measuring instrument (EDXRF) for analysis of precious metals and their alloys in composition and coating thickness.
• Element range: Titanium (22) to Uranium (92)
• X-ray tube: 50 W Tungsten Tube
• Sample Positioning: Manually
• Power Supply: AC 230 V 50/60 Hz
• Power consumption: Max. 350 W

GOLDSTARK® XGM- 500 is next Generation High Performance X-Ray Fluorescence Measuring Instrument for fast and non-destructive Material Analysis and Coating Thickness Measurement.   Application Uses : GOLDSTARK® XGM- 500 can be useful in Gold testing shop, assaying centre's, refinery centre's etc.   Advance Features On the spot certification of Karat content, ( 0-24 kt.) Identification of impurities & Powder like Ir, Ru, Rh, Ni, Pb, Fe, Co, Sn, Os, ln, Ga and other elements from Titanium TI-U. Analysis of Platinum, Gold, Silver and other precious alloys. Detection of Silver, Platinum Group elements and other metal contents in gold. Silver analysis is also possible. Verification of gold content in scrap gold.

• Operates on: 220 Volts A.C. supply.
• Capacity: 5-10 Ton
• Material: Mild Steel
• Diameter: 1 1/2
• Stroke: 100 mm
• Output: 1000 kg
• Brand Name: Radicon
• Model: RMP-942

Specimen mounting press with digital control panel this machine is good working and easy sample and Alarm Timer Knob main line indicator signal face supply hydraulic jack MS sheet frame MS rod pillar iron plating .For permanent mounting of metal & rock specimen in the thermosetting plastic or Bakelite powder. The unit of a rugged construction and is activated by hydraulic press capable of total lift of approx 2 tons. The press is provided with electric mould heater controlled by imported sunvic energy regulator and neon lamps indicator fitted in small cubicle. Supply includes finned cast aluminium cooler to cool down the mould. Unit

• Brand Name: SRI
• Display Type: Digital
• Power Supply: 220V-440V
• Body Material: Mild Steel
• Packaging Type: Wooden Pack
• Phase: 3 Phase
• Surface Treatment: Powder Coated