CE Mark Service (147 service providers available)

  • CE Marking Certification in Jodhpur.

    CE Marking Certification in Jodhpur.

    Get Price Quote

    The ce mark, which is affixed to a product or its packaging, is considered proof that a product has met the requirements of the harmonized european standard, or directive; refers to communal © european. Translated from the french, this literally means european community. The european commission, which administers the program, describes the ce mark as a passport for goods to be sold freely within the internal european market. It is required by law if the product falls under one of the new approach directives. It is not a quality mark, nor is it a mark for consumers. Intended for member state authorities, it is the visible sign to those authorities that your product is in compliance with the new approach directives. All manufacturers are required to affix the ce mark to products that are governed by new approach directives. Ce marking on a product indicates to all authorities that the product is in compliance with the essential health and safety requirements of all directives that apply to the product.

    more..
  • CE Marking Certification Services

    CE Marking Certification Services

    Get Price Quote

    CE Marking is a mandatory requirement for products to be sold in the European Economic Area (EEA). CE marked products shall meet the set of regulations published by the European Union (EU) known as directives.  By complying with relevant directives and harmonised standards one can make sure that his product is safe for user and environment and can ensure free movements of his products in the European Union.

    more..
  • Looking for CE Mark Service Providers

  • CE Mark Service

    CE Mark Service

    Get Price Quote

    Which products need it?The CE marking is a product certification. CE mark on product signifies that a product has met EU health, safety, and environmental requirements, which also ensures consumer safety. CE marking is Mandatory for the Products, which are to be placed in EU countries. If product is not CE marked it may be rejected at the port of entry. At present, 31 countries in EU ask for CE Mark and other countries are likely to ask for the same in the future. Product must comply with the Directive(s) and the Standards set by the European Union. One or more Directives may be applicable for the same product. Contact ICS to find out, which directives and standards are applicable to your products. The products requiring CE marking include toy safety, medical devices, machinery, Electrical equipments, Radio and Telecom terminal equipment, Electronic Equipments, Pressure Equipments, Construction Products, Gas appliances, In vitro diagnostic devices, Lifts, Personal protective equipments etc. There are about 25 Directives requiring CE marking.Before a manufacturer or importer is allowed to affix CE-marking on his product, there are a few steps to be undertaken by the Manufacturer or his authorized representative. Conformity Assessment Procedure: Self-Declaration1. Manufacturer performs the assessment2. Manufacturer’s technical file3. Manufacturer issues a declaration of conformity and affixes CE marking, BUT there is no Certificate. Third-Party Certification1.CE notified / Competent body assessment2 Manufacturer’s technical file with EC / Competent body report3 EC/Competent body issues certificate and approval mark.4 Declaration of conformity and affixing CE marking by Manufacturer Notified Body Certification1 Examination by EC notified.2 Assessment by EC body3 Technical file with EC body report4 EC body issues certificate and approval mark5 Declaration of conformity and affixing CE marking by Manufacturer EC / Competent Body carries out:1. Risk Assessment to verify that the product is safe to use and meets all requirements of the applicable directives.2. Drawing up a Users Manual with instructions for safe usage and warnings for dangers(when applicable).3. Drawing up a Technical File, content of which shows that the product meets all applicablerequirements. New Approach Directives Which Needs CE Marking Product NameThe Related European Union RegulationDirective 1. Low Voltage Devices Low voltage equipment (73/23/EEC) 2. Simple Pressure Vessels Simple pressure vessels (87/404/EEC) 3. Gas Appliances Gas appliances (90/396/EEC) 4. Hot Water Boilers Hot water boilers (92/42/EEC) 5. Electromagnetic Compatibility Electromagnetic compatibility (89/336/EEC) 6. Machinery Machinery (98/37/EC) 7. Civil Explosives Civil explosives (93/15/EEC) 8. Non-automatic Weighingi Non-automatic weighing instruments (90/384/EEC) 9. Equipment and Protectiver Equipment and protective systems intended for use in Potentially explosive atmospheres (94/9/EC) 10. Lifts Lifts (95/16/EC) 11. Pressure equipment Pressure equipment (97/23/EC) 12.Active implantable medical devices Active implantable medical devices (90/385/EEC)

    more..
  • CE Marking Certification Services

    CE Marking Certification Services

    Get Price Quote

    Secure access to European markets with our CE Marking Certification Services. We assist manufacturers in obtaining the CE mark, a key indicator of compliance with European Union (EU) safety and environmental requirements. Our expert services cover documentation, testing, and conformity assessments, ensuring your products meet EU standards. Navigate the CE marking process seamlessly with our guidance, showcasing your commitment to product safety and conformity. Gain a competitive edge and build consumer trust with our reliable certification services. Partner with us for a streamlined certification journey, allowing your products to thrive in the European market.

    more..
  • CE Marking Certification Service in Mumbai

    CE Marking Certification Service in Mumbai

    15,000 - 20,000 Per piece

    • ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

    CE marking is a declaration by the manufacturer that the product meets all the appropriate provisions of the relevant legislation implementing certain european directives. Ce marking gives companies easier access into the european market to sell their products without adaptation or rechecking. The initials "ce" do not stand for any specific words but are a declaration by the manufacturer that his product meets the requirements of the applicable european directive(s). Ce marking was previously known as an ec mark, and has been said to stand for an abbreviation of the french term and alternatively to stand for "comunidad europea", "comunidade europeia" and "comunitã  europea", meaning "european community. CE marking is a certification mark indicating compliance with health, safety and environmental protection standards for products sold in the European Economic Area (EEA). CE marking is also found on products sold outside the EEA, manufactured or designed for sale in the EEA.What is CE certification?CE certification is a process that gives CE marking authority over a product. Ideally, this should start early as a product development phase, as it is good to know some CE requirements development for product safety, user health, and the environment. However, it is possible to issue EC certificates for ready-to-use products. Products that have CE certification must comply with European safety regulations. They can then be freely traded within the European Economic Area (EEA). The letters 'CE' appear on many products traded on the extended Single Market in the European Economic Area (EEA). They signify that products sold in the EEA have been assessed to meet high safety, health, and environmental protection requirements.CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. It is required for products manufactured anywhere in the world that are then marketed in the EU. Why CE Marking is required?  CE Marking is a mandatory requirement for products to be sold in the European Economic Area (EEA). CE marked products shall meet the set of regulations published by the European Union (EU) known as directives such as Machinery Directive (MD)-2006/42/EC, Low Voltage Directive (LVD) - 2014/35/EU, Electromagnetic Compatibility Directive (EMC) - 2014/30/EU, Restriction of Hazardous Substances (RoHS) - 2015/863. To comply with these directives one can take help of harmonised standards published in the “Official Journal of European Union”. By complying with relevant directives and harmonised standards one can make sure that his product is safe for user and environment and can ensure free movements of his products in the European Union.The responsibility of affixing the CE marking on the products lies on the organisation placing it on the European Market. It can be Manufacturer himself, his authorised representative, importer, distributor or any other person or an organization.The European Commission refers to the CE Marking of products as a "passport" that can allow a manufacturer to freely circulate their products within the European marketplace. The marking applies only to products regulated by the European Commissions' health, safety, and environmental protection legislation (product directives). How to obtain CE marking? Identify the EU requirements for your product. ...Check whether your product meets the specific requirements. ...Check whether your product must be tested by a Notified Body. ...Test your product. ...Compile the technical dossier. ...Affix the CE marking and draft a declaration of conformity.CE marking allows you to sell your product in the countries of the European Economic Area (EEA). By implementing the requirements you may also find that your product is safer and more reliable; therefore reduce the risk of customer dissatisfaction. CDG facilitates CE Marking certification of it's clients. We provide CE marking consultancy.

    more..
  • CE Marking Services

    CE Marking Services

    Get Price Quote

    By keeping sync with the latest advancement in the industry, we at Mark Certification services have been involved in providing CE Marking services. We focus on the client’s details and pay special attention. Adding to that we offer an array of certification services with the use of latest technology in a limited time. We are the leading certification company providing services to over thousands of people in a limited period. We ensure the services that we provide are accurate and helps you to carry out your business effectively and efficiently without any problem. Thus, can we and get our best team for your work.

    more..
  • CE Mark Adviser

    CE Mark Adviser

    50,000 - 100,000 Per Certificate

    We are a well established name for giving CE Mark Adviser Services. We offer safe and secure, Ce Marking Certification with very reasonable rates. Ours is a well established CE Mark Certification in India which is worth its value and adhering with various European safety standards, depending upon the end- products. What is CE Marking (CE Mark)? The letters "CE" are the abbreviation of French phrase "Conformit Europene" which literally means "European Conformity". The term initially used was "EC Mark" and it was officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used in all EU official documents. "CE Mark" is also in use, but it is NOT the official term. CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives. Product Directives contains the "essential requirements" and/or "performance levels" and "Harmonized Standards" to which the products must conform. Harmonized Standards are the technical specifications (European Standards or Harmonization Documents) which are established by several European standards agencies (CEN, CENELEC, etc). CEN stands for European Committee for Standardization Cenelec stands for European Committee for Electrotechnical Standardization CE Marking on a product indicates to governmental officials that the product may be legally placed on the market in their country CE Marking on a product ensures the free movement of the product within the EFTA & European Union (EU) single market (total 28 countries) CE Marking on a product permits the withdrawal of the non-conforming products by customs and enforcement/vigilance authorities Along with more directives' becoming effective, more and more products are required to bear the CE Marking for gaining access to the EFTA & European Union market. However, many non-EU exporters are still unaware of or unsure about this fact and its impact on their business. What products need to bear CE Marking? CE Marking is most probably required if you export to the 25 European Union (EU) and 3 European Free Trade Association (EFTA) member states the following 22 groups of products - Appliances Burning Gaseous Fuels (AppliGas): The "appliances burning gaseous fuels" used for cooking, heating, hot water production, refrigeration, lighting or washing and having, where applicable, a normal water temperature not exceeding 105 gC. Forced draught burners and heating bodies to be equipped with such burners will also be considered as appliances. The "gaseous fuel" means any fuel which is in a gaseous state at a temperature of 15 gC under a pressure of 1 bar. Cableway Installations to Carry Persons : The "cableway installations designed to carry persons" shall mean installations made up of several components, designed, manufactured, assembled and put into service with the object of carrying persons. These on-site installations are used for the carriage of persons in vehicles or by towing devices, whereby the suspension and/or traction is provided by cables positioned along the line of travel Low Voltage Electrical Equipment : The "Electrical Equipment" means any equipment designed for use with a voltage rating of between 50 and 1000 V for alternating current (A.C.) and between 75 and 1500 V for direct current (D.C.). Therefore, it is called often "Low Voltage Electrical Equipment" which includes the vast majority of electrical equipment in everyday use. Construction Products : The "construction product" means any product which is produced for incorporation in a permanent manner in construction works, including both buildings and civil engineering works Equipment and Protective Systems for Used in Potentially Explosive Atmospheres(Atex) Equipment means machines, apparatus, fixed or mobile devices, control components and instrumentation thereof and detection or prevention systems which, separately or jointly, are intended for the generation, transfer, storage, measurement, control and conversion of energy for the processing of material and which are capable of causing an explosion through their own potential sources of ignition Protective systems means design units which are intended to halt incipient explosions immediately and/or to limit the effective range of explosion flames and explosion pressures. Protective systems may be integrated into equipment or separately placed on the market for use as autonomous systems Components means any item essential to the safe functioning of equipment and protective systems but with no autonomous function. Explosive atmospheres Mixture with air, under atmospheric conditions, of flammable substances in the form of gases, vapours, mists or dusts in which, after ignition has occurred, combustion spreads to the entire unburned mixture Explosives for Civil Uses : The "Explosives" here shall mean the materials and articles considered to be such in the United Nations recommendations on the transport of dangerous goods and falling within Class 1 of those recommendations Hot Water Boilers : The "hot-water boilers" here means a boiler fired by liquid or gaseous fuels with a rated output of between 4 kW and 400 kW (including 4 kW and 400 kW). Household Refrigerators & Freezers : Lift : The "lift" here means an appliance serving specific levels, having a car moving along guides which are rigid and inclined at an angle of more than 15 degrees to the horizontal and intended for the transport of : Persons Persons and Goods Goods alone if the car is accessible, that is to say, a person may enter it without difficulty, and fitted with controls situated inside the car or within reach of a person inside Machinery : The "Machinery" Means : An assembly of linked parts or components, at least one of which moves, with the appropriate actuators, control and power circuits, etc., joined together for a specific application, in particular for the processing, treatment, moving or packaging of a material An assembly of machines which, in order to achieve the same end, are arranged and controlled so that they function as an integral whole interchangeable equipment modifying the function of a machine, which is placed on the market for the purpose of being assembled with a machine or a series of different machines or with a tractor by the operator himself in so far as this equipment is not a spare part or a tool Marine Equipment : The "Marine Equipment" here means items listed in Directive 96/98/ec Annexes A.1 and A.2 which must be placed on board a ship for use in order to comply with international instruments or are voluntarily placed on board for use, and for which the approval of the flag State administration is required according to international instruments Medical Devices : A "Medical Device" is defined in Directive (93/42/EEC) as: any instrument, apparatus, appliance, material or other article, whether used alone or in combination, including the software necessary for the proper application, intended by the manufacturer to be used for human beings for the purpose of : Diagnosis, prevention, monitoring, treatment or alleviation of a disease, an injury or a handicap Investigation, replacement or modification of the anatomy or of a physiological process Control of Conception Active Implantable Medical Devices : The "active medical device" means any medical device relying for its functioning on a source of electrical energy or any source of power other than that directly generated by the human body or gravity. The "active implantable medical device" means any active medical device which is intended to be totally or partially introduced, surgically or medically, into the human body or by medical intervention into a natural orifice, and which is intended to remain after the procedure. In Vitro Diagnostic Medical Devices : The "in vitro diagnostic medical device" means any medical device which is a reagent, reagent product, calibrator, control material, kit, instrument, apparatus, equipment, or system, whether used alone or in combination, intended by the manufacturer to be used in vitro for the examination of specimens, including blood and tissue donations, derived from the human body, solely or principally for the purpose of providing information. Non-automatic Weighing Instruments : A "Weighing Instrument" is defined as a measuring instrument serving to determine the mass of a body by using the action of gravity on that body. A weighing instrument may also serve to determine other mass-related magnitudes, quantities, parameters or characteristics A "non-automatic weighing instrument" is defined as a weighing instrument requiring the intervention of an operator during weighing Radio Equipment & Telecommunications Terminal Equipment (R&TTE) A "radio equipment" means a product, or relevant component thereof, capable of communication by means of the emission and/or reception of radio waves utilising the spectrum allocated to terrestrial/space radiocommunication A "telecommunications terminal equipment" means a product enabling communication or a relevant component thereof which is intended to be connected directly or indirectly by any means whatsoever to interfaces of public telecommunications networks (that is to say, telecommunications networks used wholly or partly for the provision of publicly available telecommunications services) Personal Protective Equipment(PPE) : The "personal protective equipment" means any device or appliance designed to be worn or held by an individual for protection against one or more health and safety hazards. Simple Pressure Vessels : The "simple pressure vessel" means any welded vessel subjected to an internal gauge pressure greater than 0,5 bar which is intended to contain air or nitrogen and which is not intended to be fired. Pressure Equipment : The "Pressure Equipment" means vessels, piping, safety accessories and pressure accessories. Where applicable, pressure equipment includes elements attached to pressurized parts, such as flanges, nozzles, couplings, supports, lifting lugs, etc. 'Vessel` means a housing designed and built to contain fluids under pressure including its direct attachments up to the coupling point connecting it to other equipment. A vessel may be composed of more than one chamber. 'Piping` means piping components intended for the transport of fluids, when connected together for integration into a pressure system. Piping includes in particular a pipe or system of pipes, tubing, fittings, expansion joints, hoses, or other pressure-bearing components as appropriate. Heat exchangers consisting of pipes for the purpose of cooling or heating air shall be considered as piping. 'Safety accessories` means devices designed to protect pressure equipment against the allowable limits being exceeded. Such devices include : Devices for direct pressure limitation, such as safety valves, bursting disc safety devices, buckling rods, controlled safety pressure relief systems (CSPRS) Limiting devices, which either activate the means for correction or provide for shutdown or shutdown and lockout, such as pressure switches or temperature switches or fluid level switches and 'safety related measurement control and regulation (SRMCR)devices 'Pressure accessories` means devices with an operational function and having pressure-bearing housings. 'Assemblies` means several pieces of pressure equipment assembled by a manufacturer to constitute an integrated and functional whole Recreational Craft : The "Recreational craft" means any boat of any type, regardless of the means of propulsion, from 2,5 to 24 m hull length, measured according to the appropriate harmonized standards intended for sports and leisure purposes. Toys : A "toy" shall mean any product or material designed or clearly intended for use in play by children of less than 14 years of age. Trans-European Conventional Rail System : The "Trans-European Conventional Rail system" means the structure composed of lines and fixed installations, of the trans-European transport network, built or upgraded for conventional rail transport and combined rail transport, plus the rolling stock designed to travel on that infrastructure.

    more..
  • ce mark certification services

    ce mark certification services

    Get Price Quote

    CE marking is a certification mark that is used for products and indicates their conformity with health, safety and environmental protection standards. It is a manufacturer’s declaration that the offered products meet the standards of the applicable EC directives. If you are in search of a reliable name that help can you in acquiring CE Mark Certification then, it is good to approach SMF. Ours is a Maninagar (Gujarat, India) based company and provide a full suite of solutions for CE Mark Certification requirement. Clients can get in touch with us through our website.

    more..
  • CE Marking Certification Services

    CE Marking Certification Services

    Get Price Quote

    A CE marking certification is a legally mandated conformity for all products and services that are regulated by the new approach directives, a series of European health safety, environmental, and consumer protection laws. The CE marking is mandatory as it describes that the certain product/service is manufactured/rendered in compliance with general industrial safety standards. The CE marking is essential for various products like toys, machinery, electronic items, protection equipment, pressure equipment, medical devices, boilers, and much more. Ideal Quality Certifications encompasses all industry standards and our R&D professionals thoroughly inspect the products prior to giving it the CE certification.General principles of the CE marking : The CE marking shall be affixed only by the manufacturer or his authorised representative. The CE marking shall be affixed only to products to which its affixing is provided for by specific Community harmonisation legislation, and shall not be affixed to any other product. By affixing or having affixed the CE marking, the manufacturer indicates that he takes responsibility for the conformity of the product with all applicable requirements set out in the relevant Community harmonisation legislation providing for its affixing. The CE marking shall be the only marking which attests the conformity of the product with the applicable requirements of the relevant Community harmonisation legislation providing for its affixing. The affixing to a product of markings, signs or inscriptions which are likely to mislead third parties regarding the meaning or form of the CE marking shall be prohibited. Any other marking may be affixed to the product provided that the visibility, legibility and meaning of the CE marking is not thereby impaired. Member States shall ensure the correct implementation of the regime governing the CE marking and take appropriate action in the event of improper use of the marking. Member States shall also provide for penalties for infringements, which may include criminal sanctions for serious infringements. Those penalties shall be proportionate to the seriousness of the offence and constitute an effective deterrent against improper use. How to achieve CE mark approval, CE testing and meet all CE mark requirements, for my product?:There are a series of steps outlined below for CE mark approval. Depending upon your product and the nature of the risks it presents - Determine if any directives apply to your product. If more than one applies you will have to comply with all of them. Determine the extent to which your product complies with the essential requirements for design and manufacturing in the applicable directive(s).Choose the conformity assessment procedure from the options (modules) called out by the directive for your product. There are several modules available for the Conformity Assessment Procedures as listed below : Module A - internal production control Module Aa - intervention of a Notified Body Module B - EC type-examination Module C - Conformity to type Module D - Production quality assurance Module E - Product quality assurance Module F - Product verification Module G - Unit verification Module H - Full quality assurance The directives often use a series of questions about the nature of your product to classify the level of risk and refer to a chart called "Conformity Assessment Procedures". The chart includes all of the acceptable options available to a manufacturer to certify their product and affix the CE Marking.Minimal Risk :Options for products with minimal risk include self certification where the manufacturer prepares a Declaration of Conformity and affixes the CE Marking to their own product.Greater Risks :Many directives require products/systems with greater risks to be independently certified; this must be done by a "Notified Body". This is an organization that has been nominated by a Member Government and has been notified by the European Commission. Notified bodies serve as independent test labs and perform the steps called out by directives. They must have the necessary qualifications to meet the testing requirements set forth in the directives. Notified bodies may be a private sector organization or a government agency. Manufacturers may choose a notified body in any member state of the European Union.A Notified Body is usually able to offer some of the services required : Product testing Type examination certificate issue Technical File and design dossier evaluation Surveillance of product and quality system Identification of standards

    more..
  • CE Marking Certification Service in Kanpur

    CE Marking Certification Service in Kanpur

    Get Price Quote

    CE Marking is your ticket to EU market access. We have helped countless manufacturers understand and meet the requirements of relevant New Approach Directives for CE Marking. Put our advisory, testing, and certification services to work for you and allow us to guide you through every step of the CE Marking process: Determine which directive(s) are applicable to your product Fulfill the essential requirements Establish a monitoring system Establish an accident reporting system Declaration of Conformity Save the documentation for 10 years after a product has been placed on the market Register with the appropriate governing body within Europe.we provide CE Marking Certification Service in Kanpur.

    more..
  • CE Marking

    CE Marking

    Get Price Quote

    Ce-marking services from sgs – meet the compulsory product safety directives you need to trade in the eu with effective conformity assessment services from a notified body. If you want to trade in the eu, ce-marking is a mandatory conformity mark required for a wide variety of products. Ce-marking indicates that your products comply with stringent eu product safety directives. However, achieving compliance can be a complex process. As a notified body for nearly all eu product safety directives, our ce-marking conformity assessment services provide you with the expertise you need to achieve compliance. Why use ce-marking conformity assessment services from sgs? whether you need assistance for the entire process or guidance for certain parts, we can help you: achieve compliance, offering you advice and guidance determine which eu directives and standards apply to your products define your responsibilities under eu product safety directives understand the concept of diverse certification and the various steps that are required identify whether a notified body (nobo) is required to enable you to achieve compliance our ce-marking conformity assessment services include: advice on the ce-marking process conformity assessment verification of design type approval system audit and approval file and document assessment production supervision and sample testing ce audits and electromagnetic compatibility (emc) testing workshops and training risk analysis and assessment technical files user manual and instruction card assessment identification of interpretation issues issuing your ec declaration of conformity issuing your certificate of verification

    more..
  • CE Marking

    CE Marking

    Get Price Quote

    CE marking allows you to sell your product in the countries of the European Economic Area (EEA). By implementing the requirements you may also find that your product is safer and more reliable; therefore reduce the risk of customer dissatisfaction.

    more..
  • CE Mark Service

    CE Mark Service

    Get Price Quote

    CE marking is a mandatory conformity marking for certain products sold within the European Economic Area (EEA) since 1985.[1]The CE marking is also found on products sold outside the EEA that are manufactured in, or designed to be sold in, the EEA. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States. The CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives.

    more..
  • CE Marking Certification Services

    CE Marking Certification Services

    Get Price Quote

    We see capital letters CE on many products in free movement in the European Economic Area. This marking, meaning Conformity with Europe, demonstrate that the products have been audited/assessed in terms of minimum safety, health and environmental requirements. You would see CE marking on a new telephone, food processor, TV set or crayons purchased in the European Community. CE marking also indicates fair competition among manufacturers as it enforces accountability and conformity with the same requirements. CE marking is also found on products sold outside the EEA that are manufactured in, or designed to be sold in the EEA. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. CE marking is described as a trade passport because it enables the free movement of products within the European market. According to EU legislation, the EU Member States are not allowed to restrict the placing on the market of CE marked products, unless such measures can be justified on the basis of evidence of the non-compliance of the product. CE marking does not indicate that a product was made in the European Union. The CE mark also is not a quality mark. The CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives.

    more..
  • CE Marking

    CE Marking

    Get Price Quote

    Ce marking on construction products » ce marking on medical devices class 2a 2b 3 » ce marking certification » ce mark certification on machines » ce marking on low voltage directive » ce marking certification on nut & bolt » ce marking certification from notified bodies » ce marking nando approved » ce marking » ce certification » ce mark » ce mark certification in kolkata » nando approved ce mark » notified bodies » certificate of conformity » ce certification electrical testing service » emc emi testing » lm 79 testing » machinery testing » luminaries led light testing » household equipment testing » led product testing » laboratory measuring instruments testing » electro medical equipment testing » lm79 testing service » electrical safety testing service » lm79 testing in j&k » ip testing services » photometric testing » product - electrical testing service » environmental testing services » battery testing » cable gland testing » photovoltatc (pv) modules testing » consumer household commercial appliance equipment testing » information technology testing it equipment testing » lm79 electrical testing service iso certification service » iso 9001 » ohsas 18001 » iso 14001 certification » iso 13485 certification » iso 27001 certification » fssc 22000 certification social audit service » social compliance auditing services » sa8000 certification » sa 8000 » bsci services » sedex » eti audits » sa8000 certification » factory compliance audit » code of conduct audits » bsci auditing services » sedex auditing.

    more..
  • CE Mark Service

    CE Mark Service

    Get Price Quote

    The letters �CE� appear on many products traded on the extended Single Market in the European Economic Area (EEA). They signify that products sold in the EEA have been assessed to meet high safety, health, and environmental protection requirements. When you buy a new phone, a teddy bear, or a TV within the EEA, you can find the CE mark on them. CE marking also supports fair competition by holding all companies accountable to the same rules. By affixing the CE marking to a product, a manufacturer declares that the product meets all the legal requirements for CE marking and can be sold throughout the EEA. This also applies to products made in other countries that are sold in the EEA. There are two main benefits CE marking brings to businesses and consumers within the EEA: Businesses know that products bearing the CE marking can be traded in the EEA without restrictions. Consumers enjoy the same level of health, safety, and environmental protection throughout the entire EEA. CE Certification become Notified and Non Notified. Notified CE Mark can be Traded in EEA without Restriction while Non notified not.

    more..
  • CE Marking Product Certification Services

    CE Marking Product Certification Services

    Get Price Quote

    Being one of the most trusted CE Marking Product Certification Services Providers, we pride in offering extraordinary services to our Indian and global clients. We offer a wide range of services under CE Marking Product Certification Services, and we believe in professionalism. By availing our services, clients are assured of prompt and hassle-free documentation delivery. We are located in Junagadh, Gujarat, India.

    more..
  • CE Mark for All Directives by EU Notified

    CE Mark for All Directives by EU Notified

    20,000 - 30,000 Per Certificate

    Type Of Service Provider Consulting Firm Type Of Industry Manufacturing Type of Certification Renewal Document Verification Mode Office Step Mode Of Report Hard Copy CE marking, developed within the framework of the European Union harmonization of technical regulations and conformity indicating that the sign of the product with the minimum security conditions. This sign is not related to quality assurance. Only the essential requirements of the product are defined as human health, life and property safety, animal and plant life and health and to the environment in terms of consumer protection, a sign that is in compliance with the minimum security conditions. Row Area Covered by the Directive 1 Low Voltage Devices 2 Simple Pressure Vessels 3 Appliances burning gaseous fuels 4 Hot water boilers 5 Electromagnetic compatibility 6 Machinery 7 Explosives for civil use 8 Non-automatic weighing instruments 9 Equipment used in explosive atmospheres 10th Elevators 11th Freezers 12th Pressure vessels 13th The noise from equipment used outdoors environment 14th Fluorescent lamps for energy efficiency 15th Active implantable medical devices 16th Medical devices 17th In vitro diagnostic medical devices 18th Toys 19th Recreational craft 20th Building materials 21 Personal protective equipment 22 Radio and telecommunications terminal equipment 23 Moving vehicles for the carriage of passengers on the cable   Additional Information: Pay Mode Terms: T/T (Bank Transfer),Western Union

    more..
  • CE Marking Certification Services

    CE Marking Certification Services

    Get Price Quote

    The CE marking certifies that a product has met EU health, safety, and environmental requirements, which ensure consumer safety. Manufacturers in the European Union (EU) and abroad must meet CE marking requirements where applicable in order to market their products in Europe. A manufacturer who has gone through the conformity assessment process, may affix the CE marking to the product. With the CE marking, the product may be marketed throughout the EU. CE marking now provides product access to 27 countries with a population of nearly 500 million. Unfortunately, there is no comprehensive list of the products that require a CE marking. Therefore, it is the manufacturer's responsibility to determine if a product requires a CE marking. The "New Approach Directives" are documents that contain the legislation issued by the European Commission on the requirements that need to be met and procedures that must be followed in order for a particular product to be CE marked for sales in the EU.General principles of the CE marking : The CE marking shall be affixed only by the manufacturer or his authorised representative. The CE marking shall be affixed only to products to which its affixing is provided for by specific Community harmonisation legislation, and shall not be affixed to any other product. By affixing or having affixed the CE marking, the manufacturer indicates that he takes responsibility for the conformity of the product with all applicable requirements set out in the relevant Community harmonisation legislation providing for its affixing. The CE marking shall be the only marking which attests the conformity of the product with the applicable requirements of the relevant Community harmonisation legislation providing for its affixing. The affixing to a product of markings, signs or inscriptions which are likely to mislead third parties regarding the meaning or form of the CE marking shall be prohibited. Any other marking may be affixed to the product provided that the visibility, legibility and meaning of the CE marking is not thereby impaired. Member States shall ensure the correct implementation of the regime governing the CE marking and take appropriate action in the event of improper use of the marking. Member States shall also provide for penalties for infringements, which may include criminal sanctions for serious infringements. Those penalties shall be proportionate to the seriousness of the offence and constitute an effective deterrent against improper use. How to achieve CE mark approval, CE testing and meet all CE mark requirements, for my product?: There are a series of steps outlined below for CE mark approval. Depending upon your product and the nature of the risks it presents - Determine if any directives apply to your product. If more than one applies you will have to comply with all of them.  Determine the extent to which your product complies with the essential requirements for design and manufacturing in the applicable directive(s). Choose the conformity assessment procedure from the options (modules) called out by the directive for your product. There are several modules available for the Conformity Assessment Procedures as listed below : Module A - internal production control Module Aa - intervention of a Notified Body Module B - EC type-examination Module C - Conformity to type Module D - Production quality assurance Module E - Product quality assurance Module F - Product verification Module G - Unit verification Module H - Full quality assurance The directives often use a series of questions about the nature of your product to classify the level of risk and refer to a chart called "Conformity Assessment Procedures". The chart includes all of the acceptable options available to a manufacturer to certify their product and affix the CE Marking. Minimal Risk :Options for products with minimal risk include self certification where the manufacturer prepares a Declaration of Conformity and affixes the CE Marking to their own product. Greater Risks :Many directives require products/systems with greater risks to be independently certified; this must be done by a "Notified Body". This is an organization that has been nominated by a Member Government and has been notified by the European Commission. Notified bodies serve as independent test labs and perform the steps called out by directives. They must have the necessary qualifications to meet the testing requirements set forth in the directives. Notified bodies may be a private sector organization or a government agency. Manufacturers may choose a notified body in any member state of the European Union.A Notified Body is usually able to offer some of the services required : Product testing Type examination certificate issue Technical File and design dossier evaluation Surveillance of product and quality system Identification of standards

    more..
  • CE Marking certification service

    CE Marking certification service

    Get Price Quote

    We are providing CE Marking certification.

    more..
  • CE Marking

    CE Marking

    Get Price Quote

    By affixing the CE Marking, the manufacturer, or its representative, or the importer assures that the item meets all the essential requirements of all applicable EU directives. As a Worldwide Authorized Independent Agency, Absolute Quality Certification offers conformity assistance with Construction Products, Containers, Cranes, Electrical Products and Components, Electromagnetic Compatibility (EMC), Lifts, Marine Equipment, Materials, Mechanical Products, Process Machines, Pressure equipment, Personal Protective Equipment (PPE), Telecom, Toys and Wood. Where products are subject to several directives, which all provide for the affixing of the CE marking, the marking indicates that the products are presumed to conform to the provisions of all these directives. Combining CE marking with other certifications such as CB Scheme, USACanada Safety Certification, CCC, GOST-R, etc…can further reduce timescales and costs. Key Benefits Access the world’s second largest importer (and largest exporter) It is mandatory to understand your obligations and demonstrate compliance Working with a Compliance Provider from project concept helps reduce project life cycle timescales and budget Combining CE marking with other certifications such as CB Scheme, USACanada Safety Certification, CCC, GOST-R,ROHS etc…can further reduce timescales and costs

    more..
  • ce mark certification services

    ce mark certification services

    Get Price Quote

    • Name: CE MARK
    • Usage: CE certified product
    • Valuable for: Manufacturer and exporters
    • Mandatory For: UK manufacturer and exporters
    • Conditions: Applied as per standard
    • Standard rich: World wide
    • Testing facility: Available as per standard
    • Documentions: Prepared by our consultancy as per standard requirements
    • Training: available
    • Implements: Available
    • Certificate type: Hard copy / soft copy
    more..
  • CE Marking Services

    CE Marking Services

    Get Price Quote

    If you are looking for a reliable company that provides CE Marking Services in Delhi, choosing us would be an ideal option for you. CE Marking Services provided by us can help you gain easier access into the European market by ensuring that your product meets all the CE mark requirements.  If you manufacture or import products that fall into the scope of one or more of the New Approach Directive then you will need professional guidance on how to meet all the essential requirements of these directives. We are here to provide you compliance routes for your product and show you, usually in a modular format, the available routes to compliance. The essential requirements of the New Approach Directives differ from directive to directive and product to product.

    more..
  • CE Marking certification service

    CE Marking certification service

    Get Price Quote

    The CE Mark is a conformity marking consisting of the letters CE. The CE Marking applies to products regulated by certain European health, safety and environmental protection legislation. The CE Marking is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in the European market.   CE is an abbreviation for Conformité Européenne, French for European Conformity. The CE Mark indicates that the product it is affixed to conforms to all relevant essential requirements and other applicable provisions that have been imposed upon it by means of European directives, and that the product has been subject to the appropriate conformity assessment procedure(s). The essential requirements refer, among other things, to safety, public health and consumer protection.   Please note: The CE Marking is not a quality-mark. First, it refers to safety rather than to the quality of a product. Second, CE Marking is mandatory for the product it applies to, whereas most quality markings are voluntary. Many people use the term CE Mark. Initially, this was the phrase used to indicate this conformity marking. However, CE Mark was officially replaced by the term CE Marking in 1993. Thus, it is better to speak of CE Marking.   The Benefits of implementing CE MARKING To be sold within the European market, certain products require CE-marking. The CE mark declares that your product complies with the Essential Requirements of the applicable EU Directives. Applicable requirements are set forth in various European Directives that replace individual country safety standards. The Directives apply to products manufactured within but also exported to the European Union. The CE marking is a kind of trade passport for the European marketplace: it allows the manufacturer to freely circulate their product throughout the 28 countries of the European Economic Area (EEA). There is only one set of requirements and procedures to comply with in designing and manufacturing a product for the entire EEA. The various and conflicting national regulations are eliminated. As a result, the product no longer needs to be adapted to the specific requirements of the different member states of the EEA.   In addition, it may be considered a benefit that by implementing the requirements, the product will be safer for the user and this may also reduce damage and liability claims.   Which type of product requires CE MARKING? Toys Machinery Electrical Equipment Electronic Equipment Personal protective equipment Pressure equipment Medical devices Active implantable medical devices In vitro diagnostic New hot water boilers Equipment and protective systems for use in explosive atmospheres Radio and Telecommunications terminal equipment Simple pressure vessels Gas appliances Lifts Recreational craft Non-automatic weighing instruments Cableways Construction products Explosives for civil use Measuring Equipment   What is the cost of CE MARKING Cost will be calculated on the basis of the product and its application.

    more..
  • ce mark certification services

    ce mark certification services

    Get Price Quote

    Being a client-centric entity, we are engaged in offering CE Mark Certification Services. We carry out our operations from Delhi, India. CE mark is generally required for electronic products, to ensure adherence to the European standards. It is a symbol of quality. These services are rendered in accordance with the set industrial standards and norms. Our offered services are known for their timely execution, reliability, and cost-effectiveness.Features Comprehensive production to sales consultation Hundred percent successes Flexible options 

    more..
  • ce mark certification services

    ce mark certification services

    Get Price Quote

    Justifying our position in this highly competitive industry, by providing the satisfactory and time bound results. We provide CE Mark Certification Services. Broadly valued and appreciated in the industry due to our promptness, and the skilled moreover experienced group of people specially working for the commitment of the desired results, and effectiveness in what we deliver. Also, our ability to modify these as per the desires of valued clients has gifted us huge gratitude and appreciations in this nation. We are widely known as well as praised for the positive results and good relations for providing most competitive price in the market as we believe in building relations.

    more..
  • CE MARK Certification and ISO 9001 certification

    CE MARK Certification and ISO 9001 certification

    Get Price Quote

    • Name: CE MARK Certification
    • Name: ISO 9001 certification
    • Name: ISO 14001 certification
    • Name: ISO 22000 Certification
    • Name: ISO 45001 Certification
    • Name: ISO 50001 Certification
    • Name: ISO 26000 Certification
    • Name: CE MARK for machines
    • Name: CE MARK for LVD EMC
    • Name: CE MARK for exports
    • Name: CE MARK for tenders
    more..
  • CE Marking Certification Services

    Get Price Quote

    All large-scale companies who trade overseas or export their goods to the European Union require a CE marking certification for a hassle-free international trade. Known as Conformite Europeene, the CE marking certification is acquired for confirming the sale of goods in the European Economy Areas. CE marking declares that all products sold in the EEA comply to the standard directives. With this certification marking, the brand can deploy its products in those areas that are unfamiliar to EEA.

    more..
  • CE Marking

    CE Marking

    Get Price Quote

    The CE marking is a product certification. CE is a French acronym for "Conformite Europene", which in English means European Conformity. CE mark on product signifies that a product has met EU health, safety, and environmental requirements, which also ensures consumer safety. CEmarking isMandatory for the Products, which are to be placed in EU countries. If product is not CE marked it may be rejected at the port of entry. At present, 31 countries in EU ask for CE Mark and other countries are likely to ask for the same in the future. Product must comply with the Directive(s) and the Standards set by the European Union. One ormoreDirectivesmay be applicable for the same product. Contact ICSto find out,which directives and standards are applicable to your products.

    more..
  • CE Marking Certification Services

    CE Marking Certification Services

    Get Price Quote

    We provide product testing and certification services as per the eu directives.

    more..
Filter by City
top