Zinc Engine Anode
We are offering zinc engine anode. With the help of our distinguished professionals, we have been able to bring forth for our clients a wide range of zinc engine anode. Manufactured using superior quality raw material, which is sourced from the trusted vendors in the market. These products are developed with employing advanced facilities for the better future results and high performance of the products. following are the features: smooth finish excellent performance high strength corrosion-resistance longer life.
Hull Aluminum Anodes
200 Per Kilogram
Material : Aluminium
Anodized : Galvanised
Brand Name : Tulsi Metal
Color : Silver
Features : Maximum efficiency, Robust design
Usage/Application : Industrial
Surface Treatment : Powder Coated
Aluminium Tank Anodes
Aluminium Tank anodes are used to complement the coating at areas of exposed steel prolonging the life of the coating and structure. Hydrogen is evolved from aluminium anodes and thermite sparking may occur when light alloys impact on rusty steel. Therefore there is a height restriction in cargo/ballast tanks in tankers that anodes are not located at a height (in m) greater than 27/W where W is the total mass (in kg) of the anode and insert.
COPPER ANODES and NUGGETS
We manufacture Copper Anodes/Nuggets from genuine copper cathode. They are highly used for decorative, rotogravure and printing circuitry. It is also used in Electrical ground rod and other functional plating applications. We provide Copper Anodes that are in different size and shapes having different levels of phosphorous. Our Copper Anodes provides good control and reliable performance. Copper Anodes that we manufacture are by far the best in the market with the finest reliability and dependability.
lead anodes
2 Ton (MOQ)
Color : Grey
Shape : Square
Usage : Electroplating, Galvanising
Thickness : 10-20mm, 20-30mm
Packaging Type : Wooden Box
HMS Metal Corporation is a Leader in the production and Supply of Anodes used in copper, zinc and nickel refining. Our electrowinning anodes integrate years of experience, research and development.With fully Integrated & 100% in-house production facility we are able to Internally controlled workmanship for alloying, rolling blade, head bar tinning and casting, welding, cutting & packaging. Although anodes are manufactured to client’s designs, with each stage of manufacture using the best quality raw materials and controlled by a strict quality process system, anodes are produced efficiently and consistently within estimated time. Anodes made of lead alloys are used in the electrowinning and plating of metals such as manganese, copper, nickel, and zinc. Rolled lead-calcium-tin and lead antimony alloys are the preferred anode materials in these applications, because of their high resistance to corrosion in the sulfuric acid used in electrolytic solutions. Lead anodes also have high resistance to corrosion by seawater, making them economical to use in systems for the cathodic protection of ships and offshore rigs. Rolled lead anodes have become the industry benchmark with the benefits of fine grain structure, less segregation and elimination of cracks and voids resulting in more uniform corrosion of the anode. The shape and size of the copper bar and the anode plate are made to customer specifications The copper bar is tin-plated and then given a homogeneous coat of lead several millimeters thick as protection from corrosion caused by aggressive acid mist. This method of protecting the anode bar also ensures the best possible bond between lead and copper for improved current flow and long service life. Chemical Composition The lead anodes are manufactured in calcium-tin-lead (Ca/Sn/Pb), antimonial lead (Sb/Pb) and silver-lead (Ag/Pb) alloys which are the preferred alloys for these applications with their high resistance to corrosion in the sulphuric acid based electrolyte solutions. Lead anode alloys generally consist of tin, Calcium, and Antimony. The favoured alloys, based on the specific application, are lead- antimony as well as lead-Calcium-Tin alloys. One reason for this is because of the alloys’ resistance to corrosion in the sulfuric acid that’s used for electrolytic solutions. (Lead-alloy anodes are used in electro winning – also known as electro extraction – as well as for plating metals such as manganese, copper, nickel, and zinc.) Lead anodes have superior attributes, such as being highly resistant to the corrosive effects of seawater. We also offer custom Lead Alloys to meet your specifications We specialize in manufacturing complete Lead Anode and Anode Plates for Zinc, Nickel and Copper extraction electrolysis plant. Electrowinning of copper, nickel, cobalt and zinc in SX-EW processing of ores. Ca/Sn/Pb alloy is generally used for copper, nickel and cobalt applications. Ag/Pb alloy is the preferred alloy in zinc electrowinning Packing The finished anodes are packed together in wooden pallets with thick thermocol in between each Anode to prevent the individual anodes from bending.Do's & Dont;'s Remember, proper care of anodes will pay off in longer life. Try these suggestions with new Republic anodes. Do not leave new anode in chromium solution when tank is idle. Instead, remove them and place them in clean water after use until a uniform brown film of lead peroxide is formed on the surface. Do not confuse this dark brown lead peroxide coating with lead chromate. Lead chromate (PbCrO4) is yellow in color and acts as an insulation. This should be removed in order to restore the anode to the most efficient service level. We recommend that approximately two inches of lead anode be above the solution level at all times. We do not recommend mixing old and new anodes together. Adding new anodes intermittently in order to obtain amperage needed could result in new anodes scaling up very rapidly. If it is not practical to replace all anodes at one time, we suggest extreme care be given to the new anodes to assure proper breaking in for efficient performance.
Aluminum Cube
Material : Aluminium
Grade : 7XXX
Color : Grey
Finishing : Polished
Phosphorus Copper Anode
460 Per Kilogram
Type : Copper Anode
Material : Copper, Pure Copper
Shape : Round, Ball
Thickness : 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm, 60-70mm, 70-80mm, 80-90mm, 90-100mm
Certification : ISI Certified
Length : 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm
Application : Earthing, Making Power Battery, Plants, Wire, Printed Circuitry
Color : Brown, Light Brown, Red
Feature : Corrosion Proof, Excellent Quality, Fine Finishing, High Strength, Perfect Shape
Finishing : Non Polished, Polished
Country of Origin : India
Textures : Solid
Brand Name : Jams Copper
Size : Oval - 80mm x 30mm; Ball Ø 25mm, Ø 38mm, Ø 50mm or as per customer requirement
Standard : ASTM B265, Grade 5, Grade 9
Weight : Per foot
Zinc Anodes
280 - 300 Per Kilogram
Type : Zinc Anodes
Material : Zinc
Certification : ISO 9001:2008 Certified
Color : Metallic, Shiny-silver, Silver
Finishing : Non Polished, Polished
Packaging Type : Plastic Sack
Tensile Strength : 0-5 Mpa, 5-10 Mpa
Application : Cathodic Protection, Corrosion Prevention
Condition : New
We are the main supplier of this product.
Nickel Anodes
With our domain expertise, we are capable of supplying Nickel Anodes in the Indian market. The Nickel anodes, we offer, are suitable for diverse industrial requirements owing to their excellent properties. The clients can avail the Nickel anodes from us in varied specifications to cater to the diverse requirements. We further offer the Nickel Anodes at affordable price.
Aluminum Cube 6061
280 Per Piece
Features: : High strength, Durability Corrosion, resistance
Copper Anodes
We offer copper anodes. clients can avail from us superior quality copper phosphorus patta, which is procured from certified vendors of the market. These are appreciated for dimensional accuracy, flexibility, tensile strength, corrosion resistance and durability. These are extensively used in various industries such as electrical, engineering, automotive, telecommunication and others. these copper anodes contain double phosphorus so they are also called as phosphorised anodes .these anodes are available in various shapes such as oval & flat and various sizes like 12”, 18” & 24” in length as per the requirement of the customer.
Electroplating Zinc Anode
Following are some of its features: Enhanced durability Robust construction Excellent performance Reliability High efficiency
Copper Anodes
We are offering copper anodes. “kriscop” copper anodes are precision manufactured using pure copper cathode that makes these highly useful in application areas like for making decorative items, used in rotogravure machines for printed circuitry, used as electrical ground rod, in electro-forming applications and in many other functional uses. Available grades: phosphorised copper anodes and electrolytic copper anode available shapes: oval, slabs, balls, rods, nuggets and others. With our capability to provide these in end finishes as per customer's requirements, the range offered by us under this includes copper nuggets and copper balls.
Titanium Mesh Basket Anode
Antimani Chrome Anode