Boilers Dealers in Mulund, Mumbai (61 products available)

Type : Three pass horizontal, smoke tube, fully wetback, packaged boiler, conforming to the latest revisions of Indian Boiler Regulations. (IBR) Capacity : 1000 to 25000 kg/h F & A100º C Working Pressure: 10.54 / 14.5/ 17.5kg/cm2 (g) and above. Fuel : LDO / FO / Gas / Dual Fuel (Oil cum Gas) Thermal Efficiency : 88 ± 2 % without heat recovery unit and 92 ± 2 % with heat recovery unit based on NCV of fuel oil. Burner : Fully automatic pressure jet (high - low / stepless modulation ); indigenous / imported burners. The combustion chamber (furnace) forms the first pass in which the fuel is atomized, combusted and radiant heat transmitted to the water contained in the shell, submerging the furnace, reversing camber and smoke tubes. The hot flue gases are diverted through the internal reversing chamber (wetback) and subsequently to the second and third pass of tubes transferring the convective heat to the boiler. The boiler is of Class 1 fusion-welded construction. Burner & Boiler Controls The burner programmer ensures an automatically controlled programme for start-up, firing, shutdown and restart of the boiler based on measurement of boiler pressure. Necessary interlocks are provided for safe operation. The water level is controlled through Mobrey type dual controller which is a magnetically operated water level controller of vertical type in a float chamber and is externally mounted on the boiler. One switch of the dual controller operates the electric feed pump on/off. The second switch cuts out or locks out the burner in case of low level of water and at the same time operates a low level alarm. The boiler is provided with one high pressure cutout switch and one additional pressure switch for high/low, or continuous modulation of operation. Salient Features MAXITHERM has adopted the modern concept of eccentrically located furnace with smoke tubes arranged in a staggered manner on one side of the furnace. The front and rear tubes and the furnace are accessible for inspection and maintenance. Generously proportioned furnace with large furnace volume ensuring; Maximum possible absorption of radiant heat. Avoidance of flame impeachment on the rear of the furnace. Prevention of clinker formation. Enhanced life of furnace. Adequate water and steam spaces enable the boiler to meet fluctuating loads with out appreciable fall in the operating pressure. This also ensures prevention of priming, foaming and carryover of the boiler water into steam pipelines and further ensures steam with high dryness fraction. The eccentrically located furnace has the following advantages :- Easy accessibility to the outer surface of furnace for inspection and scale removal. Possibility of providing single smoke box, which when opened makes all smoke tubes accessible for cleaning. The burner is mounted directly in font of the furnace, facilitating opening of the front door to clean the tubes without disturbing the burner.

Material : Quenched and Tempered Alloy Steels

Thickness : 6mm TO 150mm

Width : 2000mm TO 3500mm

Length : UP TO 14000mm

Max. Weight : 25MT per plate

The boiler quality and pressure vessel steel plates are primarily intended for use in welded pressure vessels where notch toughness is important. These grades cover a range of tensile strengths from 450 - 620 MPa and this versatility explains much of the specifications popularity. According to different strength levels, the plates are available in four grades: Grade 55, Grade 60, Grade 65, and Grade 70. The maximum thickness of plates is primarily limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel is killed and conforms to fine austenitic grain size requirements. Generally, steel plates are hot / cold formed are moulded to desired shape for major boilers to withstand high temperature, pressure and adverse corrosive environments.Since boilers and pressure vessels carry high pressure and temperature fluids and hold low- temperature fluids as well, the steel plates ought to have properties like high strength, toughness, ductility and resistance to corrosion. Due to high temperature applications, these steel plates have excellent creep resistant properties. Further, Padham Steel can also supply crack resistant hydrogen induced steel plates which serve as vital material for pressure vessels. we supplies Boiler Quality Plates only of superior quality that can hold the internal pressure in valves and boilers. Our clients repeatedly prefer us for the longevity and durability of our products. Padham Steel is one of the premier names in the industry that offers a qualitative range of Boiler Steel Plates. These are manufactured and supplied as per the specific market demands. We offer these in varied specifications as per the requirements of our esteemed clients. These are widely used for manufacturing superior quality carbon steel plates with consistent and controlled properties. MECHANICAL PROPERTIES High strength Good low-temperature toughness High corrosion resistance High resistance to HIC, SSCC and embrittlement High creep resistance Durable   APPLICATIONS Power Plants Process Industries Refineries Coal gasifiers Petrochemical manufacturing sector Shipbuilding industries Pressure vessels, boilers, gas turbines Spheres, compressors and heat exchangers Storage tanks manufacturing Skid mounted equipments for oil and gas industrie

We are offering Elco Fuel Oil Burners with mechanical atomization to our clients. Having monobloc structure, these are ergonomically designed allowing easy access to inner components.   The salient features are as follows Combustion tube, fastened on the front wall of the generator by a sliding clamp Sound-proof air box Support plate of components removable for maintenance Adjustment of air on pressure side Closing of air shutter in stopping condition by return spring or hydraulic control 1 or 2 pressure stage pump with solenoid valve(s) Hoses for fuel feed, 1.2 m long with G3/8 adjustment couplings supplied Complete electrical wiring with connection by 7-pole plug and 4-pole connector for the 2- rate types 2800 rpm motor Single-phase power supply 230 V / 50 Hz / 3.A (60Hz on request) LOA 24 control box Quick removal of cabinet support Flame control by removable photoresistive cell Removable protective hood 60 to 350 kw Fully automated blown-air burners Meet the applicable requirements of EN267, EN60335, EN55014, EN55104 standards. Fit all heating equipment, thanks to pressure adjustment and air flow devices Enjoy low level noise, as a result of the optimized configuration of the ventilation and insulated air box Elements and internal parts are easily accessible, without prior removal of the fuel piping, simply by turning round the support plate of the components. The EL02/03B range includes various modes of control and operation types matching most applications

SALIENT FEATURES • Low intial & operational cost. • Beyond perview of IBR • Steam at full pressure in two minutes of cold start. • No explosion Hazard • High efficiency 5 pass design. • Space saver - vertical package unit. • Dependable parts, longer life • Easy trouble free operation • Smokeless combustion • Peak-efficiency at even part loads. • Wide temp. setting range • Inbuilt HRU & HRU bypass duct.   CONTROLS • Electrical control pannel box mounted on the boiler cell consists of contactors, relays and cut outs for blower, feed water pump and fuel pump. Burner programmer prepurging timer, ignition transformer, indicating lamps, temperature controler, pressure gauges, High & low pressure switches, mannualcontrol switches and power ON/OFF main switch   SAFETY • Boiler shuts down giving an audio visual alarm in the event of low pressure high outlet temperature, low liquid level, erratic flame or flame failure.   BURNER • Fully automatic down fire forced draught pressure jet ON/OFF control with audio visual alarm device in the event of flame failure or safety lockout.

We offer Clean Steam Generator. Application:- Clean steam is getting used for sterilization in autoclaves, pipeline, tanks & Fermentors and disinfection. It is also getting used for re-humidification of sterile areas & preparation of pure quality water for medicinal & general purpose washing & cleaning use in Pharmaceutical, Bio-Technology, Hospitals & allied industries.

Capacity : 3 kg/cm2 at 143°

Electricals : Main supply A.C., 415V, 3 phase/50 cycles, Max, load 3kw. Air: 1 cfm at Kg/cm2 gauge.

Pure Steam Generator for pharmaceutical & Biotech Industries to produce pure Pyrogen free sterile steam for Sterilization in autoclaves, Pipeline, Tanks.Complete with all contact parts in S.S 316Lq and non contact parts in S.S 304 q complete with column-1 No. Pre heater-2 Nos., S.S stand, all piping connection will be sanitary triclover fittings, Sumo make pump for feed water, Flow meter, S.S panel.Control Panel (S.S 304) with boiler steam & pure steam Temperature indicator, conductivity indicator for incoming feed water.The feed water & the cooling water should be of Dematerialized quality pass through filter, Cation, Anion & Mixed bed Exchanger to get minimum dissolved solids (T.D.S) & hardness.

Working Pressure : As per customer requirement

Specialities : Cost efficiency, Durability, Reliability

Finishing : As per customer requirement

Color : As per customer requirement

Temperature : As per customer requirement

Material of Construction : Steel

We offer boiler tubes. Range : upto 30 mtrs. Long applications : - boiler - condensers - super heaters - coolersinter-coolers - chilling plants, etc. these are also used in armamentsguns, machine tools, pressure vessels etc. Specifications & grades of tubes pipes :- tubes :- astm :- a 179, a 192, a 210 (grade a1, c), a 334 (grade 1, 6), a 209 (grade t1, t1a), a 213 (grade t5, t11, t12, t22), a 556 (grade g, c) bs 3059 :- part I (grade 320), part ii (grade 360, 440) din :- st35.8, st45.8, 15 mo3, 10crmo44, 13crmo910 pipes :- astm :- a 106 (grade a, b, c), a 335 (grade p5, p11, p12, p22) bs :- medium, heavy. bs 3602 pt-1, cfs 360 "tubes are also supplied as per customer's specific requirements."

Features: Sleek designs UV- and corrosion-resistant Inner grooved copper tubes and slit aluminum fins for superior heat transfer Energy-efficient compressors Safety and control devices built in Weather-proof canopy

We design and manufacture a number of Oil Fired Boiler control panels , incorporating Client specified , and meeting IBR & Class regulations. Most of the Marine Boiler panels can be replaced by our panels. Safety Panels , Combustion control panels , Burner Management Systems (BMS) , individual process Loop control systems , spares & service of burners. Client specific – discrete or PLC based panels with Local & Remote control HMI’s are available. Contact us for a complete engineered solution.

Material : Steel, Gunmetal,

Size : 63 mm

Usage : Industrial

Finish : Chrome Finish

Pure Steam Generators exploit a competent evaporation column, thereby giving the highest quality Pure Steam. In addition, when assessment or preservation is required, the components are readily accessible with no need to eradicate or disassemble any of the major components to access the critical areas.Pure steam generator is ideal in sterilization of pipelines, tanks,fermentors etc. It is also suitable for humidification of sterile areas where pure steam is required.

Capacity : 0-500 kg/hr

Material : Stainless Steel

Working Pressure (kg/Square.cm.g) : 10-15 kg/Square.cm.g

We are the leading supplier of this products.

we are suppliers and importers wide range of mild steel / stainless steel / alloy steel / carbon steel black & galvanized steel tubes & steel pipes for various purposes. we offer diverse product range of steel pipes and customized pipes catering to the varied demands of buyers. being one of the leading ms / ss / as / cs pipes supplier in mumbai, india. our clients can avail from us best quality, durable and reliable industrial pipes. we offer these to our clients in a wide range of specifications in customized and standardized forms. these high quality pipes are known for serving critical applications with high temperature and pressure. we are one of the leading ms / ss / as / cs pipes supplier in mumbai, india. our company is a market leader in offering mild steel / stainless steel / alloy steel / carbon steel pipes. these are made using premier grade materials obtained from trusted vendors, and thus, they last for a very long time. tensile strength, corrosion proof, reliability and varied sizes are the special features of this range. we offer these pipes at competitive prices that give value to our clients’ money.

Power : 4.5 To 18 kw

Brand Name : Benito

Phase : Single Phase

Application : Home

Model : For Spa Center, Gym & Hotel Use

We are engaged in the supplying of highly durable Boiler Tubes that are sourced from the trusted vendors. Our Seamless Boiler Tubes are manufactured from the optimum quality raw materials as per the IS: 1914 BS 3059 PART-1. Highly durable, our Seamless Boiler Tubes provide long lasting performance without any maintenance. Easy to install, our Seamless Boiler Tubes are non-abrasive in nature. We have firmly positioned ourselves as one of the leading Steam Boiler Tubes importers and suppliers based in India.

Features: Sleek designs UV- and corrosion-resistant Inner grooved copper tubes and slit aluminum fins for superior heat transfer Energy-efficient compressors Safety and control devices built in Weather-proof canopy

Specification:   Complete 18 SWG SS 304 Body 3 Kw Immersion Heater with ISI Mark Spares Thermostatic Temperature Control Indicator Lamps Steam Outlet Water Level Indicator Water Outlet Provision Insulation can be provided on request 10 / 15/ 20 / 25 Liters Complete SS 304 Duly Argon Welded Electric Operated Double Jacketed Water Level Indicator Compact & Sturdy Built 10/15/20/25/30 Liter Capacity