Carbon Steel Dealers in Byculla, Mumbai (269 products available)

IntroductionSteels with only carbon as their specific alloying element are known as carbon steels. Traces of 0.4% silicon and 1.2% manganese can be found in these steels. Carbon steels also contain small quantities of copper, nickel, molybdenum, aluminium and chromium.The following datasheet provides an overview of AISI 1015 carbon steel.   ApplicationsAISI 1015 carbon steel can be used in forged, cold-headed or cold-formed parts which are low strength with wear resistant and hard surfaces.

We are widely acclaimed for making available high grades of Carbon Steel, which is developed by using premium grade materials. Known for its durability, Carbon Steel is used in the production of an assortment of products. We offer Carbon Steel in various shapes such as round, hex, square, flat, plate, coil and wire sections in standard as well as off sizes.

We are offering stainless steel, carbon steel, alloy steel fittings etc. Pipe fittings : stainless steel, dairy fittings, invesments casting, ductile iron, alloy steel & fittings & carbon steel pipe fittings b/w, s/w & screwed. Astm a 403, astm a 182, f1, f5, f11 & f22, astm a234, astm a105.

Our Company RENI STEEL (INDIA) was established in the year 1997 and is primarily engaged in Stockiest & Suppliers, Importers & Exporters of Stainless Steel, Alloy Steel, Carbon Steel, Pipes & Tubes, Sheet, Plates, Bars and Largest manufacturer of Pipe fittings & Flanges.

We are one of the leading traders and suppliers of Carbon Steel

We are also manufacturer, supplier and exporter of carbon steel a 105 forged fittings, olets and flanges as per customers drawing or specification. Carbon steel a105 forged fittings : size : 12"nb to 4"nb in class : 2000 lbs, 3000 lbs, 6000 lbs, 9000 lbs type : socket weld (sw) & screwed (scrd) – npt, bsp, bspt form : union, elbow, hex nipple, elbow, cap, plug, bushing, adapter, tee etc. Materials : carbon steel a105 forged fittings – cs a105 forged fittings, astm a105 carbon steel a105 outlets : size : 12"nb to 12 "nb in class : 3000 lbs, 6000 lbs, 9000 lbs & required schedule type : socket weld (sw) & screwed (scrd) – npt, bsp, bspt materials : carbon steel a105 outlets – cs a105 outlets, astm a105 carbon steel a105 flanges size : 12"nb to 48 "nb class : 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs din standard nd 6,10, 16, 25, 40 specifications : stm, asme, api, aisi, bs, ansi, din, jis, mssp, nace materials : carbon steel a105flange – cs a105 flanges, astm a105, astm a694- f42, f46, f52, f60, f65, f70 carbon steel a105 round bars range : 5 mm to 500 mm thick in 100 mm to 6000 mm length available with nace mr 01-75. Other grades : 17-4ph, 15.5 ph finish : bright, black, polish form : round, square, hex (af), bush, rectangle, flat, wire mesh carbon steel a105 round bar a105, a350 lf2

We are offering carbon and alloy steel. Carbon steel : seamless & erw pipe, tube & pipe fittings in grade astm a-106 gr. A, b & c, astm a 179, astm a 53 gr. A & b, astm 210 a1, is : 1239, is : 3589, hydraulic pipe, boiler tubes duly ibr certified with test certificate etc. alloy steel : seamless pipe & pipe fittings to grade astm a-335, p1, p2, p5, p9, p11 & p22 alloy steel plates sa 387 class 1 & 2 grade 2, 5, 9, 11, 12, 22, 91, astm a 515/516 grade 60/70, is 2002 gr. 2 & is 2062 carbon steel plates etc.

Material : Carbon Steel

Technics : Forged

Type : Plug

Shape : Reducing

Brand Name : Rajdev Steel (India)

Port : Nhava Sheva Port, Mumbai (India)

Supply Ability : 10000 Piece/Pieces per Week As Per Requirement

Certificate : AN ISO 9001-2008

We are the main supplier of this product.

We can offer the following range of tubings for your boiler pressure parts the following grades are available: astm a 179 astm a 210 gr. A1 astm a 209 gr. T1 bs 3059901320 bs 3059902360 bs 3059902440 bs 3059902620 bs 3059902622 bs 3059902243

we are pleased to introduce ourselves to your esteemed organization one of the leading suppliers and stockiest of industrial raw materials specially. Stainless steel and non-ferrous metals, for the last twenty-five years. Our scope of supply covers all over india, thus we have our own specialized list of products, designed to meet the requirements of 21st century industries. Since you are one of the leading industrial organizations, using these products on a larger scale, we furnish, in nutshell of items available with us: we are manufacture of all types(pipe fitting,flanges ferrule fitting & valve) & we would like to introduce to you. We are doing job work also in precision components and industrial product as per party requiremt. Manufacture of stainless steel, carbon steel & alloy steel - pipe, tube, fittings & dairy fittings as elbow, tee, stub end, reducer, ball valve, dairy union, flanges,nut bolt,waishar. A105 & a182 etc. In grade astm tp304, 304l, 316, 316l, 310, & also in cupro nickel 90/10, 70/30 and nickel base alloys etc. We also deal with ibr certified fitting, flanges, and pipes & tubes.

We are Stockholder & Distributors of IS:4454 Part-1 Cold Drawn High Carbon Spring Steel Wires for Mechanical Springs Grade-1.

Ball and Roller Bearings, Spinning tools, Beading Rolls, Punches and Dies. Use : By its character this type of steel has high resisting nature against wear and can be used for components which are subjected to severe abrasion, wear or high surface loading.

We are manufacturer and exporters of Carbon Steel like ASTM A-1 06GR. A, B&C, A-333, GR. I & 6, A-53 GR. A&B, ASTM A-1 20GR, A-1,BS 3059, Part I&II, SA 179, IS 1230, 3589GR. Light (A), Medium (B), Heavy(C), Etc. In All Shapes And Sizes.

STM A106 GR.B, API 5L GR.B, IS-1239, IS-3589 etc) ALLOY STEEL (ASTM A333, A335 GR.6, P-11, P-12, P-22 etc.)We are an eminent name in this industry, indulged in providing our precious customers a best quality range of Carbon Steel. This Carbon Steel is manufactured with perfection following high definition engineering principles and is generally used in engineering industry for a wide array of applications.Features: Fine Construction Low Maintenanc

We Are One Of The Leading Stockist in Carbon Steel Pipe : ASTM A 106, A 53, API A 5L Gr A, B, C, ASTM A 333, Gr 1 to 6 (IBR & NON IBR)

Different types of plain carbon steel in various grades are available with us. These are used in the manufacture of various products. Their premium quality ensures that the resultant products are too of highest grade. 

We are huge suppliers and exporters in Carbon Steel Seamless Pipes and Carbon Steel Seamless Tubes, Carbon Steel Welded Pipes and Carbon Steel Welded Tubes . These Carbon Steel Pipes and Tubes are utilized as a part of different industry like Oil and Gas, Petroleum, Petrochemical, Chemical, Machine Building, Automobile, and so forth. These Carbon Steel are accessible in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips in customers necessity. We offer Carbon Steel at sensible costs to the customers.

We can offer the following range of tubings for your boiler pressure parts. The Following Grades Are Available: •ASTM A 179 •ASTM A 210 GR. A1 •ASTM A 209 GR. T1 •BS 3059/90/1/320 •BS 3059/90/2/360 •BS 3059/90/2/440 •BS 3059/90/2/620 •BS 3059/90/2/622 •BS 3059/90/2/243 seamless carbon steel A 106 GR B pipe which is specially developed for high-temperature service. Fabricated with top quality raw material, procured for our reliable vendors, the pipe we manufacture is exported in large numbers to different countries. It is needless to say that our entire range of products strictly sticks to the specifications as given by the clients. Our products have gained enough appreciation in the market for the chemical and corrosion resistant nature. SIZES Outer Diameter : 6.00 mm - 219.10 mm Wall Thickness : 0.5 mm - 12.7 mm LENGTHS Random Lengths : 4-7 m standard, max 16 m Fixed Lengths : max 35 m We also produce 'U' Tube in radius 1.1 D to 1 meter - as per customers’ requirements. CONDITIONS Heat treated • Hard Drawn • Stress Relieved STANDARDS ASTM A-53, A-106, A-179, A-192, A-210, A-213, A-333, A-334, A-335, BS-3059, BS-3602, BS-6323, DIN-17175, DIN-2391

Length : Single Random, Double Random & Cut 

Type : Seamless, ERW, Welded, CDW 

Sizes : From OD 15mm x WT 1.2mm - OD 159 x WT 2.0mm. 

Grades : ASTM / SA 179 / A 210 GR.A / BS 3059 GR.360 & 440 

Range : 1 mm OD up to 254 mm OD in 0.2 TO 20 mm thickness.

Others : Hydraulic Tube, Horn Tube, Capillary Tube, Boiler Tube, Precision Tube, IBR Tube

  Welded & Seamless Pipes Flanges & Fittings Sheet, Plate, Coil & Strip

Type : High Carbon Steel Plates

Thickness : 12-150mm

Brand Name : JSPL / Essar / Uttam Steel / China / Posco

Shape : Rectangular

Length : 6000-12000mm

Material Grade : C55

Material : High Carbon Steel Plates

Usage/Application : Industrial

Width : 1200-2500mm

Alloy Pipe Impex, we carry a full inventory of Carbon Steel Seamless Pipes and Tube Products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. Carbon Steel Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission. We Supply Carbon Steel in ASTM A106 Grade B, ASTM A106 Grade C, ASTM A53 Grade B, ASTM A333 Grade 3, ASTM A333 Grade 6, ASTM A334 Grade 1, ASTM A334 Grade 6, ASTM A179, ASTM A192, ASTM A210 A1, ASTM A210 C.The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications Alloy Pipe Impex specializes in Carbon Steel Seamless Pipes and Tube with years of Experience in Manufacturing Carbon Steel Seamless Pipes and Tube. we offer high quality, lower cost but the best service.   astm a106 carbon steel seamless pipes and tubes Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. Federal Steel Supply is a world leader in the supply of A106 / SA 106 pipe and stocks a full range of grades B/C in a size rage of NPS 1/8″ to NPS 48″, with nominal (average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification*. Pipe ordered under this specification shall be suitable for bending, for flanging, for welding, and for similar forming operations. A full range of A106 stock is available in Schedules 10 through 160, STD, XS, XXS. Unscheduled wall thicknesses available up to 4 inches. A106 PIPE SPECIFICATIONSA/SA106NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified. Process Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.Steel cast in ingots or strand cast is permissible.Hot-finished pipe need not be heat treated.Cold-drawn pipe shall be heat treated after the final cold draw pass. ASTM A53 GRADE B SEAMLESS PIPES Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26. The steel categorized in this standard must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard. The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body. Nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard. The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements.. A53 PIPE SPECIFICATIONSA/SA 53NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.   ASTM A333 GRADE 6 SEAMLESS PIPES Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless.  Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11.  Discussed herein are Grades 1, 3 and 6.   A333 PIPE SPECIFICATIONSA/SA 333NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. ASTM A333 GRADE 1 SEAMLESS PIPES Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness This guide covers standard specification for several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, copper, cobalt, and molybdenum. The number of tubes in a heat-treatment lot shall be determined from the size of the tubes. The tubes shall have a hardness number that does not exceed the prescribed Rockwell and Brinell hardness values. Several grades of steel shall conform to the following tensile properties: tensile strength, yield strength, and elongation. For Grades 1, 3, 6, 7, and 9, the notch-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe, shall not be less than the prescribed values. Several mechanical tests shall be conducted, namely: flattening test; flare test (seamless tubes); flange test (welded tubes); reverse flattening test; hardness test; and impact tests. Hydrostatic or nondestructive electric test shall also be performed. Materials shall be tested for impact resistance at the prescribed temperature for the respective grades. Impact temperature reduction values shall be by any amount equal to the difference between the temperature reduction corresponding to the actual material thickness and the temperature reduction corresponding to Charpy specimen width actually tested. A334 PIPE SPECIFICATIONSA/SA 334NPS 1/4″- 2″Thickness 01 mm to 08 mm. Scope This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. ASTM A179 SEAMLESS TUBES Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test. A179 PIPE SPECIFICATIONSA/SA 179NPS 1/8″- 3″Thickness 1.2 mm to 08 mm. Scope This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus.This specification covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter. Note 1—Tubing smaller in outside diameter and having a thinner wall than indicated in this specification is available. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside diameter or with a wall thickness under 0.015 in. [0.4 mm]. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.   ASTM A192 SEAMLESS TUBES Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test. A192 PIPE SPECIFICATIONSA/SA 192NPS 1/8″- 3″Thickness 1.2 mm to 08 mm. Scope This specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service.The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification. Mechanical property requirements do not apply to tubing smaller than 1/8  in. [3.2 mm] inside diameter or 0.015 in. [0.4 mm] thickness. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. ASTM A210 SEAMLESS TUBES Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes This specification covers seamless medium-carbon steel boiler and superheater tubes. The specification also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. The specification provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending. A210 PIPE SPECIFICATIONSA/SA 210NPS 1/4″- 2″Thickness 01 mm to 08 mm.

We also stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless Steel, carbon and alloy specialty steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center.

Carbon steel, is steel where the main alloying constituent is carbon. "Steel is considered to be carbon steel when no minimum content is specified or required for chromium, cobalt, columbium, molybdenum, nickel, titanium, tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect; when the specified minimum for copper does not exceed 0.40 percent; or when the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60.

Flanges : ASTM,

Carbon Steel Flanges are used in many industries, it is used for aligning and joining purposes. It is used for extension of pipe lines, extension of projects and so on. Carbon steel flanges is used because of low cost, it is prone to rust, corrosive ness and so on.

Application : Construction

Material : Steel

Surface Finish : Coated

Carbon Content : 1.5 to 2.35%

Chromium : 12%

Type Of Steel : D2, D3, D4, D5, D7

Sr. No. : Material

Size : Schedule

Specification : 1

Carbon Steel Pipe : 15 NB To 150 NB

Sch. 40s To Sch. XXs : A-106 Gr. B  Seamless

200 NB To 600 NB : Sch. 20 To Sch. 160

2 : Low Temperature Carbon Steel

15 NB To 500 NB : Sch. 40s To Sch. XXs

Range :15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form :Seamless / Erw / Welded in Round & Square . Carbon Steel : ASTM / ASME A 53 GR. A , B ASTM / ASME 106 GR. A , B ,C . API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70. ASTM / ASME A 691 GRA , B ,C Alloy Steel: ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91 ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.    

Type : Elbow (R=1.5D), Bends (R=3D), Tee, Reducer

Size : 1/2" to 24"

Specifications : ASTM A 234, A 403 to ANSI B 16.9

Ends : Buttweld