Conveyor Magnets Dealers in Mumbai (53 products available)

We offer Magnetic Seperator. Cross Belt Magnetic Separators provide a true self cleaning industrial magnetic separator systems solution, for continuous separation of ferrous particles from material flowing on conveyors. These separator system uses a high strength overhead suspended plate magnet housed in a severe duty industrial conveyor operating in an inverted position.

We are offering single drum magnetic separator. Pmt magnet drum separator is ideal for the continuous & automatic removal of iron particles from any dry bulk material. Magnet drum is "self cleaning separator" as there is no need for manual cleaning. magnetic drum is made up of two drums; the inner drum consists of 180 degree magnetic field incorporated within a stainless steel outer drum. The outer drum revolves around the inner stationary drum. For best and effective performance of magnet drum separators, they should be fitted at the discharge end of conveyors, in line with processing chutes or vibratory feeders. Drum consists of key waved shafting to suit the customers drive specifications.

• Type: PERMANENT MAGNETIC .
• Brand Name: LA'MINA
• Material: SS -316
• Shape: ROUND / SQUARE / RECTANGULAR
• Application: PHARMA / FOOD / DYES & IMTERMEDIATE IND
• Structure: SS 304 / 316
• Model Number: MGR - RE - 03 - 150 mm dia
• Place of Origin: MUMBAI

We are offering " la'mina " permanent magnetic grills are designed manufactured and supplied to all pharma companies throughout the country for the past five decades . The grills consists of two three four five rods rare earth with high gauss strength . The rods are bolted to two specially fabricated ears at each side suitable to the inside pipe diameter . .two holes required to be drilled so that the grill can be bolted rear earth magnetic rods in round square rectangular shape can be provided . Grills also manufactured for ribbon blenders hoppers nauta mixers sigma mixers inlet and outlet etc imported magnets that are available is stock can also be supplied . other products designed and manufactured by us include vibrating screens , vibratory feeders , magnetic separators etc . You may visit our laminaltd.com to know mor about us or contact us on 09820284163 . Or write to us at la'mina pvt ltd . 15 zakaria agadhi ind est , marol maroshi road marol mumbai 59

Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different.   Features High intensity. High garden, high power rare earth magnets Available with flanges to suit square and round chutes Available with angle deflectors above and between the tubes for heavy contamination Direct access to magnets in chute Easily installed and extremely easy to clean

We are offering magnetic tube.

Avail superior quality Magnetic Grills proficiently manufactured by us that is used to remove fine iron contamination from dry free flowing items like spices, sugar, grain, tea, plastic granulate and powdered chemicals. Magnetic Grills are constructed by using number of highly magnetic rods providing strong supporting frame work. Special Features : Easy and quick installationGuaranteed instant protectionEfficiently remove rust, stainless steel scrapings and wear from machinerySupporting frameworkwelded and highly polishedNo power supply requiredNo running costsMaintenance free Fully sealedMagnetic gap between two pipes minimum 15-25mm Construction For Material : 304 grades Stainless Steel for all exterior parts

Crystal" Magnetic sticks are very useful for removing steel particales from blind holes and useful for assembly & maintenance work for removing steel parts lying in oil tanks. "Crystal" magnetic sticks are compact unit embodying powerful 'Alnico' Magnets assembled in Stainless steel pots which are designed for lifting application. Lenght can be increased by joining extension.

• Usage: Removing Iron Chips And Ferrous Particles
• Belts Length: 235 mm
• Shape: Rectangle
• Certification: CE Certified
• Thickness: 25 mm
• Width: 135 mm
• MOQ: As per Requirements
• Quality: Optimum Quality

Size Charts: Hand Magnetic Separator 4 x 6 Hand Magnetic Separator 5 x 7 Hand Magnetic Separator 5 x 7  (Heavy)Hand Magnetic Separator 6 x 8 Hand Magnetic Separator 7 x 9 Hand Magnetic Separator 9 x 11

Magnetic Humps are used where the flow of material is vertical. The material strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow of material. The Magnets are of Hinged type and can be easily opened for periodic cleaning. Hump Magnets can be supplied to suit any size of Pipe/Duct.  

Housing Pneumag is a magnetic separator which is mainly installed into pneumatic conveying lines. The Pneumag system will be used in the food and pharmaceutical industries with products like pharmaceutical drugs and powders, flour, sugar, starch and granulates.   Housing Pneumag Fabrication Size: Housing Pneumag are made with 140mm x 158mm x 460mm (l x b x h) with 2mm thickness or as per customer drawing and specifications.   Housing Pneumag Fabrication Material: As a Housing Pneumag is a product of pharmaceutical and food processing industries, it must be made from high-definition food-grade Stainless Steel 316quality with the thickness of 2mm.   Housing Pneumag Fabrication Detail: Housing Pneumag is a product used in pharmaceutical and food processing industries. This Housing Pneumag is made of Stainless Steel 316quality with 2mm thickness. The shape of the housing is rectangular cuboids joined with round conical ends at the both sides of product access and product exit. For the smooth product flowing and internal cleaning purpose rectangular corner are fabricated precisely with taper bending of TIG welding and finally smooth grinding done on the product with high end finishing. For applications in the pharmaceutical food industry the surface qualities have been further improved with internal finish 1.2Ra and external finish with 1.8Ra. Housing Pneumag required skilled workmanship in the fabrication of front gasket flange straightness and making joint of cone neck to the pipe end.     Housing Pneumag Use And Application: The Housing Pneumag system will be used in food and pharmaceutical industries with products like pharmaceutical drugs and powders, flour, sugar, starch and granulates processing equipments for removing of magnetic particles.

Safety Tools are produced from materials that have a reduced risk of generating sparks and for use in safety-sensitive applications to reduce the risk of injury to the user, which can result in a fire or explosion, causing personal injury andor property loss. These unique tools are often referred to as non-sparking, or "spark-reduced" safety tools. Ampco Safety Tools offer the additional product features of being non-magnetic and corrosion-resistant.

We have specially developed High Intensity, High gradient, Permanent Magnetic Roller Separators with the Indigenously Developed Technology. Which has been used successfully in various Industries Specially Minerals. The Machine incorporates high energy Rare Earth Neodymium Permanent Magnetic Roll Assembly, which is manufactured and assembled under strict quality control and specification. Under High Intensity Magnetic Field, Magnetic Contamination can be easily removed efficiently.

Magnetic drum separators provide an efficient means for extracting ferrous material from dry, bulk products in free-flowing processing systems. They are comprised of a stationary permanent magnet, either standard Ferrite Magnets or High Power Rare Earth Magnets enclosed in a non-magnetic stainless-steel drum. Product flow is diverted so that it falls onto the top and flows across the surface of the drum. Ferrous matter contained in the product flow is drawn to the drum's surface (and held against it) by the powerful magnet housed inside. While non-ferrous products falls from the side of the drum in a normal manner, ferrous metal clings to its surface. As the portion of the drum with the ferrous material rotates to the side opposite the product flow, the magnetic field is reduced so that the ferrous matter falls from the drum into a collection container. The end result is purified product ready for processing without the worry of costly damage caused by tramp metal. Rare Earth, Neodymium is 5 times stronger than Ceramic Magnets and can remove micron sized particles.

We are the well known Magnetic Filter Manufacturer, Exporter and Supplier in India. Our Magnetic Filter is used for filtration of iron particles from products in liquid form, like in hydraulic circuits in cooling systems. The Magnetic Filter can be easily removed from the stainless steel enclosure, by loosening fasteners. For removing oxidized iron or low magnetic particles, the rare earth magnets of high intensity is recommended. Used In Industries : ChemicalPaperCeramic Industry Salient Features : Consists ferrite & rare earth magnet Sturdy constructionMS & SS: 304/316 construction

Magnetic Filters are used for filtration of iron particles from products in liquid/slurry form. They are essentially used in chemical, food, pharma and oil industries. They are also frequently used in hydraulic circuits in cooling systems. The Filter Magnets are made up of either Ceramic or High Intensity Rare Earth Magnets.

Magnetic Separators and Suspension Magnets have become indispensable for decades. They are used for removing magnetic parts from non-magnetic materials in order to protect crusher, mills, processing plants etc. against too much wear and damage. They serve for cleaning non-magnetic bulk goods with iron contamination, for instance cleaning of foundry sand, coal and the like. They are used for recovering magnetic material from ore, steel mill slag etc. Generally, Overband Magnetic Separators and Suspension Magnets are installed above conveyor belts, vibratory feeders or chutes. They pick up ferrous metal parts from the bulk goods. In most cases, the magnet can also be installed in an existing installation without much expense.

Features of Magnetic Separation Machine- High intensity. High garden, high power rare earth magnets Available with flanges to suit square and round chutes Available with angle deflectors above and between the tubes for heavy contamination Direct access to magnets in chute Easily installed and extremely easy to clean

We are a Prominent Manufacturer of magnetic Separator. the Magnetic Separator is Specially Designed to Meet a Wide Range of Application. the Permanent Magnetic Drum Consists of a Stationery Permanent Magnetic Assembly, Having Uniform Magnetic Field Across the Entire Width of Drum and Half the Circumference. as the Material is Fed Evenly from the Hopper and Then Falls On the Vibrating Chute and is Uniformly Spread Across the Drum Length. Strong Magnetic Field Attracts and Holds Ferrous Particles Revolving Shell. as the Revolving Shell Carries the Iron Particle Through the Stationery Magnetic Field and Non-magnetic Particles Fall Freely from the Shell, the Magnetic Material Carried with Rotating Shell Falls After Magnetic Field Finishes the Limit On Rotation Shell. constituents permanent Magnet, non-magnetic Stainless Steel, gear Motor range 300 Mm, 400 Mm, 450 Mm, 500 Mm, 600 Mm, 800 Mm

Magnetic Filter is used for filtration of iron particles from products in a liquid form in pharmaceutical industries. Shape of the housing is cylindrical round as shown in pic. Magnetic filters are made up of 3mm 316 Stainless steels with inlet and outlet flange connections and a drain plug. Inner finish of housing is mirrored while the outer finish is as per requirement.  

Features   High intensity. High garden, high power rare earth magnets Available with flanges to suit square and round chutes Available with angle deflectors above and between the tubes for heavy contamination Direct access to magnets in chute Easily installed and extremely easy to clean Description   Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different. Application   Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.

Magnetic Drum Separators are essential in every processing industry and are widely used for the separation of iron contamination from minerals, chemicals, food, flour, sugar, grains, plastics, sand, cement, fertilizers, rock, borings and many other gravity or conveyor transported products. The Drum Type Separators can be either permanent magnetic or electro magnetic, depending on the nature of the application.

• Capacity: 3.5 to 4 TPH MAX:
• Equipment: Permanent Magnetic Concentrator Separator
• Belt Width: 400 mm
• Material Conveyed: Slag + Steel Scrap (0 – 75 mm ) of 60° C Dry.
• Bulk Density of material: 2 MT/M3
• Permanent Magnet size: (W x L x H) 420 x 900 mm x 90mm

1) A main Hopper of suitable capacity fitted with unbalanced Motorised Vibrator Feeder Tray with 0.5 KW – 1440 RPM – 02 Nos. Vibrator Motor, with Variable Vibration arrangement. 2) Bottom support is with gusset plate. We provide 4 Nos. foundation supports of steel plates so that the complete Permanent Magnetic Concentrator can rest on flat earth, or any platform / structure.    Body   The Permanent Magnet body has been designed to provide the most efficient magnetic circuit, whilst keeping the magnet weight to the minimum, without loss of performance making this the ideal range of magnets. The magnet body is fabricated from high permeability low carbon steel for minimum leakage and maximum magnetic lifting efficiency.    Side Covers 12 S.W.G. M.S Sheet will be bolted with a main body. Inspection windows have been provided for maintenance.   The Slag Crusher and Separator are light weight as compared to other crushers in the market and can be conveniently shifted where ever required. The Slag Crusher and Separator do not require any expensive concrete foundation 

• Material: Mild Steel
• Frequency Range: 5 MHz
• Brand: Tanna Electronics
• Model Name/Number: TE-16

Suspension Magnets are used when only small contamination levels are encountered. The material accumulated on the pole face must be removed at regular intervals. When stopping the plant and in case of power failure, the iron drops back into the material to be conveyed.Overband Magnetic Separators are used when substantial quantities of magnetic material and or long bulky pieces are contained in the conveyor burden. This material is attracted by the magnet and is transported out of the magnetic field and ejected by the discharge belt running around the magnet.

• Brand Name: MG
• Material: MS
• Color: Black
• Operating Temperature: 0 deg C to +60 deg C

Magnetic Roll Separator, magnetic badge, magnetic drum, Cylinder Magnet

coal injector, radiation tube, Water Spray Nozzles

non magnetic copper rods, non corrosive brass rods, industrial copper rods